Specifications & Dimensions
|Chuck Key Type:||Keyless|
|Hole Depth Control:||Depth Rod|
|Number of Handles:||1|
|Included with Item:|
|Cord Length (ft.):||6|
|General Warranty:||1 year replacement|
|Dimensions and Weight:|
|Chuck Size:||1/2 in.|
|Package Contents:||Bubble Level|
Ratings & Reviews
This 1/2 Inch Hammer Drill Is a Versatile Sears Exclusive
When the going gets tough, get out this Craftsman Corded Hammer Drill and get the job done. The 6.0 amp motor will power through your roughest challenges, in both rotary and rotary hammer modes. You can vary the speeds as you vary your materials, from 0-1000 RPM and 0 to 16,000 BPM. The drill features a single-sleeve keyless chuck for easy tightening and loosening. Use the trigger switch's lock-on button when you're really ready to power through.
The 1/2 inch hammer drill switches from drill to hammer capabilities to maximize this tool's versatility. The spindle lock makes changing the bit quick and easy. Ball bearings make for smooth precise toolmanship. The grip handle with overmold is designed for comfortable use. An auxiliary handle gives you options for positioning, as does its adjustable depth stop rod. An indicator lights to show the tool is live to prevent accidents.
- This Craftsman Corded Hammer Drill has a six-foot cord for easy reach
- The powerful 6.0 amp motor will blast through your toughest jobs in both rotary and rotary hammer modes
- Change the speeds (0 to 1000 RPM; 0 - 16,000 BPM) to fit the materials you're working with
- A single-sleeve keyless chuck and a spindle lock makes changing bits simple and fast
- Ball bearing ensure precise operation
- The auxiliary handle with adjustable depth stop rod provides additional grip options to fit any project
- Lock-on the trigger switch when you're ready to rock this go-to drill
- Available for Gift Wrap
Added on February 16, 2009
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
I have been using this tool for drilling into the concrete floor to set 1/2" x 4" wedge bolts. Worked great so far. Easy to control while drilling and the built in levels are a plus.
Huntington Station, NY
I was drilling several deep holes into a tree with long spade bit. I was using trigger stopper (the red round plastic next to the trigger) to continuously drill without my finger on the trigger. For a while I enjoyed using this stopper. However to my surprise, at some point when I released the trigger, it didn't stop! It continued until I frantically unplugged it. The stopper would pop up but the drill kept going. Once this happened, I could no longer stop the drill with the trigger. When I plug it in it just starts. When I unplug it stops. The only way to keep the drill stopped while plugged in was to set the turn direction to neutral. It was too dangerous to use it in this state and it has been more than two years since I bought it (I rarely used it, as I have a lighter model). The drill went into the garbage bin.
Then the front plastic smoked and melted (the piece that holds the side handle). Took it back - was told to get the professional version - which I did - much better quality but also a lot more in price.
This drill replaced an older vrsion of the same specs that was 15 years old. This drill is much improved and both in design and power. Good value for the bucks
I bought this to drill some holes in my concrete foundation to mount some braces for some pipes. The drill performed very well. It is heavy but is well balanced. This drill has features not found in even more expensive brands. I highly recommend this tool.
i bought this drill and used it to drill about 10 holes and all was fine. Fast forward to the next use and after about 30 5/16 holes, the gear in the inside broke. I don't use a hammer drill that often so by the time it had broken, the warranty had expired. I took it back to the store to no avail. I ordered the replacement part and installed it and I was back in business. The next time I used it, all went well. After about 6 months, i had to use it again and after about 40 holes, the gear broke again just like before and now it sits in my closet after only using it 4 times and noone will help me because i have had this drill for about 2 years although it still looks new (and it should after only 4 uses). I have always used craftsman tools but this is A BIG DISAPPOINTMENT.
- Qualifying Orders $59 + SHIP FREE Offer ends 10-Jul-2013 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends 31-Dec-2013 See details.
- Online Only! Extra 10% off select tools Sold by Sears. Valid thru 5/22/13 8am CT. Offer ends 21-May-2013 See details.