Share This Page Print

 00921400000-1  spin_prod_694573601  spin_prod_694573701
 00921400000-1  spin_prod_694573601  spin_prod_694573701
Enlarge Image

Craftsman  1/3 hp 3.5 amp 10'' Band Saw (21400)

Sears Exclusive. |   Item#  00921400000 | Model#  21400
Close

Create a Review

 
 
 Rating 4.0 | 262 Reviews | Write a review
Reg Price: $199.99
Savings: $30.00
$169.99
Reg Price: $199.99
Savings: $30.00
$169.99
I Own This Add to List
 

Specifications & Dimensions

Dimensions:
Blade Length (in.): 70.5
Depth (in.): 13
Height (in.): 34
Length (in.): 21
Table Dimensions (LxW): 12-3/8 x 13-3/4 in.
Width (in.): 21
Product Overview:
Adjustable Height of Cut: 4.625
Amps: 3.5
ENERGY STAR Compliant: No
ETL Listed: Yes
General Warranty: 1 year general warranty
Item Weight (lbs.): 66
Lock On Switch: No
Maximum Blade Width (in.): 0.5
Maximum Width of Cut (in.): 9.625
Minimum Blade Width (in.): 0.125
Number of Speeds: 1
Number of Wheels: 2
Package Contents: Bandsaw w/ blade installed. Fence, Table, Guide Rail, Upper Table Trunnion Assembly, Bag of Loose Parts, Bi Lingual Manual
Quick Release Blade: No
Resaw Capacity (in.): 4.625
Saw Type: Bench Top Band Saw
UL Listed: Yes
Voltage (V): 120
Color:
Color/Finish: Gray
Power:
Circuit Amp Rating: 15 amps
Cord:
Cord Length (ft.): 6
Cord Management: Manual Wrap
Cord Type: 18 gauge
Blade:
Blade Size (in.): 70.5
Motor-Engine:
Blade Speed (SFPM): 2780
FPM: 2780
Motor Voltage: 120
Speed Capability: Single
Guides & Instructions:
Owner's Manual: Yes
General Features:
Stand Type: Closed
Table Height From Floor (in.): 39.875 (On Stand)
Table Material: Cast iron
Table Movement: Tilt
Table Tilt (Right and Left): Left 0-45 deg.
Installation:
Assembly Required: Assembly Required

Overview

Ratings & Reviews

Special

Projects

Product Description

Craftsman 10 Inch Band Saw: Smooth, Precise and Portable

This Craftsman Band Saw nimbly slices through soft and hard woods alike, allowing you to cut intricate details and smooth curves that other saws just can’t. From clever jig saw puzzles to ornate furnishings, this saw delivers control and an ultra precise, steady 2,780 foot per minute flow of razor sharp steel teeth giving you the best possible cut every time you flip this machine on. The perfect addition to any shop, it’s quick to adjust, featuring a tilt-able cast iron deck and movable fence for accurate cuts you can count on.

A great way to keep dust down at home, in the shop or at work, the Craftsman 10 Inch Band Saw hooks up to dozens of shop vacs for less mess and more work. Giving you precision cuts on the jobsite, this band saw packs light, fast and is always ready to roll. To ensure proper tensioning, it’s equipped with a pair of ultra-smooth rolling ball bearings that adjust easily, adding life to every blade. A solid addition to any job, this saw delivers control, precision and high quality work, at a price that pays for itself. Set it on your workbench, flip it on and get the job done right.

  • Full kit includes: saw, rip fence and miter gauge
  • The Craftsman Band Saw’s 3.5 Amp motor provides smooth, continuous muscle with 1/3 HP making it perfect for cutting both soft and hardwoods
  • Open design delivers 4-5/8 in. maximum depth of cut at 90° and 9-5/8 in. throat depth
  • Cutting table adjusts easily from 0–45 degrees for a variety of angled cuts
  • Adjustable ball bearing blade guides deliver the perfect tension and support for long blade life
  • 2,780 FPM blade rotations cuts plastic, wood and more leaving clean, smooth lines
  • Dust collection port allows you to attach your wet/dry vac for dust reduction
  • Some assembly required
  • Warranty: 1 year general

Added on July 26, 2010

 

Overall, others give this:

262 Reviews Write a review
171 Reviewers (65.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise22 found this helpful
jwm57
Oct 23 , 2008
A well used saw
I came to this site as I'm looking to download a manual for this saw (recently moved and my old manual is somewhere in a safe place <g>). While here I decided to look at the reviews. I've had the Craftsman 10" band saw for several years, probably close to five ( I bought it on sale when a local Sear's Hardware was closing). I had a perfectly good Delta 10" at the time, but as I make musical instruments the resaw capacity was the selling point - I snapped it up and then sold my Delta. The nominal depth of cut on this saw is 4 5/8", but the measured distance from table to guide is almost 5" (I've never tried to go that thick). I haven't seen other 10" saws that go beyond about 4''. and my Delta was less. For the gentleman that mentioned that the throat depth is less than 10" may I say that the 9 5/8" of this saw is also more than most. The size of the saw is defined by the size of the wheels, not the throat depth. The missing 3/8" is the distance between the "rising blade" and the outside of the riser housing. Again this saw gives a maximum capacity as compared to others. I would have bought the saw for the resaw depth, and at full price. But the addition of roller guides and the metal housing (nice to be able to attach one's "tuning tools" with a magnet, don't have to look for the right Allen wrench or the engineer's square) are a plus. For those with a small shop who yet want capacity this is your saw. It is portable (sort of). Let me expand on that. I'm 73 years old, and had an unexpected below the knee amputation a few days after we moved, and before my shop was set up. I was able to mount my saw on a new "wheelbarrow" table while sitting in a chair (and that involved lifting it to mark the wood base for drilling the saw mounts, then lowering it to set the base on the metal table and bolt it there, then lifting the saw again to lower it onto the "base/table" combo). It took a while, and I confess to moments when I thought I wouldn't make it (with the saw in my lap), but it took about two hours including the drilling. Please pardon the personal comments, but it should tell you that this machine is maneuverable - and I like to boast now and then. OK, the gripes - none of them negate the price/performance ratio of this saw. I'd like a bit more power, but you won't find that in other 10" saws either. The lower guides could be easier to access, but they aren't that difficult. I'd love a better rip fence, but one can handle that with shop made jigs. The odd length blade is a problem, but there are many custom blade makers who don't charge an arm and a leg for custom sizes. The miter guage, as someone said, isn't the highest quality, but then again I really don't trust better ones either - always set the guage with a square or protractor. If I find I need more power, or more capacity, I'll look into the Craftsman 12" saw - the picture on the site looks as if it is the same basic design. But this saw has been reliable for a few years now so I'll swallow my temptation for "bigger and better" until I need it. As to my gripes, they are totally irrelevant. I don't care what blade packages Sear's provides - I go custom anyway. I want to choose my TPI, rake, tooth pattern, and etc. for each use - I have six blades ranging from 1/8" to 1/2", and in different patterns for the stock thickness, one can't expect Sear's to carry speciality items in the way a custom maker does. The rip fence isn't a problem either - although I wish Kreg would make a speciality fence for 10" saws instead of just 14". I have several home made wooden fence faces, and I clamp the Kreg resaw guide to one if I'm resawing. When doing an accurate job, such as resawing 0.6mm sections for the ribs of a lute, one must do one's own set up. A planed wooden "auxiliary fence" can be shimmed against the provided fence to get a straight rip, and the resaw should be done with a "point fence" anyway. OK, enough rambling. This is a fine saw for the price, and it is a fine saw compared with the competition, and it is a fine saw for the jobs I want to do (which are, at times, a bit sensitive - although I admit that sometimes I just flip it on and run a quick cut). Best, Jon
Criticism15 found this helpful
mdwoodwkr
Oct 24 , 2008
Poor blade adjustments
Well like many others I to read the reviews on this Craftsman Band Saw, then went out and purchased my saw. I must say this is not my first band saw made by Craftsman that I've purchased. The one I'm replacing lasted me about 15 years with not one problem. Set up was easy, Its when I decided to change from the factory blade to a 1/8" blade. I spent over an hour attempting to keep the blade from coming of the wheel. Following the instructions word for word, I was not able to track the blade in the center of the wheel. Almost every time I turned on the switch, the blade wanted to shift into another position. After 20 days of this saw I returned it back to Sears for a full refund.
 

SnydersWeb

Brighton, CO

Nov 11 , 2014
via sears.com
Overall
Great little bandsaw

I first started out with the 9'' Band Saw but it developed a problem after the first use. So when I took that one back I looked closer at this one and decided to upgrade. WOW, what a difference! It can be a little tricky to get adjusted but once you get it dialed in it cuts like a champ. I much prefer the roller-guides over what the 9" has, the blade control on this thing is far superior it as a result. My wife likes to do Tole painting and with this thing I can pretty much easily cut anything I want with it. It's darn near perfect for that. With the rip fence and miter gauge and tiltable table I should be able to do a large variety of other cuts with it too provided it will fit into the throat.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review

degump1959

Richmond, MI

Nov 4 , 2014
via sears.com
Overall
Outstanding Small Bandsaw

I Bought this saw to replace an old tabletop saw that broke. My old saw was pretty much useless and turned me off to bandsaw's all together, I was very hesitant about buying this saw but relied on the reviews of other owners. After setting this saw up and a few minor adjustments I have used this saw more in 1 month than I did my old saw in years. Quality is very good for a small saw and adjustments are not to bad. Instructions are not too good but most import tools are the same. I recommend watching Alex Snodgrass You-Tube and set it up as he recommends.

I would recommend this product to a friend.

Helpful
(3)
Not Helpful
(0)
Flag this Review
Oct 6 , 2014
via sears.com
Overall
Exceptional Value

I recently purchased this 10 inch model after owning an entry level 9 inch unit for years. This saw has several key features. The first is the cast iron table, good for magnetic jigs. The fence and fence guide are very good. I also like the roller bearing guides. Important things are "adjustable" (table perpendicular to blade, table/blade alignment). The only issue I noted was the "play" in the vertical aluminum "rail" when locking the bearing assembly height. I added an aluminum shim to the upper portion, and the "play" is now unnoticeable. Nothing poorly made. Excellent quality. A great saw.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review

Oldfrog

Kent, WA

Sep 23 , 2014
Overall
Great piece of equipment

I wasn't sure about buying this saw, by reading some of the reviews, but when a competitors saw broke on the first day, and I had a hassle returning it, I decided to try the Craftsman based on their record. Out of the box, I had to do some adjustment - expected -, not over whelming though. Once set up, this saw is great! I works slow on thick stock, but then again, it wasn't designed for really heavy work. I would recommend this to anyone. Two improvements that I would like to see: 1. A viewing glass to check blade tracking, attached flexible light.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review

Bobthehandyman

Watertown, NY

Sep 3 , 2014
via mobile
Overall
Very handy and good quality

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(1)
Flag this Review

qpt

Spring, TX

Aug 18 , 2014
Overall
Good saw for the price

I have owned this saw for a few years. I use it primarily for re-sawing 4 inch wide boards to make thin stock for Christmas ornaments. I have used it to rough cut items such as Adirondack chair blanks and other odd shaped items. For the low price I have no complaints. The re-saw capacity is very limited due to motor size and saw size, but it will work fine for softer woods. I have re-sawn some dense exotics with mixed results. For my use, when space was extremely limited, the saw has been outstanding. If I were not trying to re-saw, I would see no reason to upgrade to a bigger saw. I briefly had a 9 inch band-saw made by another company that was absolutely useless. As long as expectations are reasonable, this saw will perform admirably.

I would recommend this product to a friend.

Helpful
(7)
Not Helpful
(0)
Flag this Review

OOZZ

Valley Park, MO

Aug 14 , 2014
via sears.com
Overall
Excellent

I just picked it up for the store. I spent quite some time adjusting all 6 bearings. After that I was able to cut freehand a thin veneer 2" wide from a soft pine. I was impressed. Also it is very quite.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review
Jun 18 , 2014
via sears.com
Overall
Great Saw for the money!!

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review

Gryphaan

Irwin, PA

Apr 26 , 2014
via mobile
Overall
Better than expected

Right out of the box easy setup and great results

I would recommend this product to a friend.

Helpful
(5)
Not Helpful
(0)
Flag this Review

Gambo1953

Bowie, MD

Apr 10 , 2014
via sears.com
Overall
Product seems fine but service/delivery sucked

Poor/damaged packaging, missing parts (that I could fill with my own junk can), major alignment/tweaaking required, but once done seems to function quite well. A good buy but don't have it delivered.

I would recommend this product to a friend.

Helpful
(3)
Not Helpful
(1)
Flag this Review
  • Members Get 10% back in points on first $500 of each qualifying purchase with a Sears Card. Offer ends   25-Dec-2014 See details.
  • Free shipping! Orders $59 or more Offer ends   31-Dec-2014 See details.
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends   31-Dec-2014 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2014 See details.
  • Need it by December 24. Offer ends   24-Dec-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x