Share This Page Print

 00918171000-2
 00918171000-2
Enlarge Image

Craftsman  1/4 in. Crown 18 ga. Stapler Kit

  Item#  00918171000 | Model#  18171
Close

Create a Review

 
 
 Rating 3.0 | 7 Reviews | Write a review
Reg Price: $99.99
Savings: $10.00
$89.99
  • Temporarily Unavailable
I Own This Add to List
 

Specifications & Dimensions

Dimensions:
Tool Air Inlet Size: 1/4 in.
Dimensions and Capacity:
Crown Width (in.): 1/4
Overall Dimensions: 9.5 in. L x 2.3 in. W x 9.5 in. H
Product Overview:
Adjustable Depth Control: Yes
Average Air Consumption (CFM): 2.0
Size Range: 3/8" -1 3/16"
Fasteners Used: Finishing staples
Feed Type: Strip
Item Weight (lbs.): 2.6
Operating Pressure Range (psi): 80-120
Tool Min. Hose Size: 1/4 in.
Color:
Color/Finish: Silver
Included with Item:
Case Included: Yes
Package Contents: 500 - 1/2" Staples, 500 - 3/4" Staples, 300 1" Staples Owners manual and Tool
Capacity:
Gauge Range: 18 Gauge
Material Finishes:
Housing Material: Magnesium

Overview

Ratings & Reviews

Special

Projects

Product Description

The ¼ in Crown 18 gab Stapler Kit is a Heavy-Duty, No-Nonsense Performer

Including a super-light gun with a magnesium body, the Craftsman ¼ in crown 18 gab stapler kit delivers reduced vibration and exceptional operator comfort, while a unique rear exhaust offers super-quiet operation. Adjustable depth of drive changes fastener penetration with the simple spin of a wheel while sequential and contact trip modes deliver single-fire or bounce-fire operation for the versatility to tackle any job.

The 1/4 in crown 18 gab stapler kit is ideal for upholstery, furniture, cabinetry, trim, molding and paneling applications. The gun shoots 18-gauge staples from 3/8 to 1-3/16 inches in length quickly and easily for multiple-use applications, while the Craftsman warranty delivers protection you can count on.

  • The Craftsman 1/4 in crown 18 ga stapler kit weighs only 2.6 lbs. for portability, maneuverability and no-hassle storage
  • 0.85 SCFM use at 90 PSI for super-powerful operation
  • 1/4-in crown staple width capacity
  • Comes with 500 1/2-in staples, 500 3/4-in staples and 300 1-in staples
  • Rubber nose tip and oil-less operation
  • Bounce-free operatin or single fire use sequential and contract trip modes
  • Great for upholstery, furniture, cabinetry, trim, molding and paneling applications
  • Super-light gun with solid magnesium body
  • Rear exhaust for quiet operation
  • Uses 18-gauge staples
  • Backed by a Craftsman warranty to protect your investment

This product is:
  • Available for Gift Wrap
This product comes with:

Added on July 26, 2010

 

Overall, others give this:

7 Reviews Write a review
3 Reviewers (43.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
(0)
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise2 found this helpful
Richarde5
Dec 3 , 2008
Does What It Should Do
This product performs as expected. I have been involved with woodworking professionally since the 70s. At this point, I have shot about 300 staples with it; no jams, easy to use.
Criticism4 found this helpful
whatsthis
Nov 27 , 2006
Where do you buy 1/4' crown by 3/8" length (deep)?
Can't find 3/8" length (deep) staples with 1/4" crown (across the top). I bought this gun for the purpose of being able to shoot 3/8" deep staples and I can't find them! The Overall ratings I listed are bogus, I haven't used the gun yet. They did not even give samples of the 3/8" deep staples in the original package...but once you tear open that package, try to return it!
 

bbaer

Milford, OH

Jan 29 , 2013
via sears.com
Overall
Crown Stapler

Well I haven't used this once so, you might consider keeping that in mind. It works and seems to do a good job as expected. There are a few things I didn't like as well...it was hard to gauge just where the staple was going to land, but I am sure I will figure that out once I use it more. The one thing that has me concerned is, the adjustment to set the staple depth didn't seem to work. Again maybe I didn't mess with it enough, but I have a feeling that it's not working.


Helpful
(0)
Not Helpful
(0)
Flag this Review

Richarde5

Amarillo, Tx

Dec 3 , 2008
via sears.com
Overall
Does What It Should Do

This product performs as expected. I have been involved with woodworking professionally since the 70s. At this point, I have shot about 300 staples with it; no jams, easy to use.

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review

JDS5337

, Soouther California

Jun 13 , 2007
Overall
Great value for a stapler!

The only reason I did nto give it 5 starts overall is becasue the staple size is misrepresented. They should just say that it uses 1/2" and up, not 3/8" and up. You cannot find a 3/8" staple to purchase anywhere. They go in 1/4" increments. Other than that the gun works as intended.


Helpful
(0)
Not Helpful
(1)
Flag this Review

JDS5337

, Soouther California

Jun 13 , 2007
via sears.com
Overall
Great value for a stapler!

The only reason I did nto give it 5 starts overall is becasue the staple size is misrepresented. They should just say that it uses 1/2" and up, not 3/8" and up. You cannot find a 3/8" staple to purchase anywhere. They go in 1/4" increments. Other than that the gun works as intended.

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review

t2green

Fly over country, Nebraska

Feb 6 , 2007
via sears.com
Overall
Light Weight

I have not had the product long enough to give it 5 stars. Over time it may earn them. No problems, plugged it into my small air compressor and I was sticking picture frames together. Depth was easy to set. It did not seem like it was a big air consumer.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

whatsthis

, near Chicago

Nov 27 , 2006
Overall
Where do you buy 1/4' crown by 3/8" length (deep)?

Can't find 3/8" length (deep) staples with 1/4" crown (across the top). I bought this gun for the purpose of being able to shoot 3/8" deep staples and I can't find them! The Overall ratings I listed are bogus, I haven't used the gun yet. They did not even give samples of the 3/8" deep staples in the original package...but once you tear open that package, try to return it!


Helpful
(4)
Not Helpful
(1)
Flag this Review

whatsthis

, near Chicago

Nov 27 , 2006
via sears.com
Overall
Where do you buy 1/4' crown by 3/8" length (deep)?

Can't find 3/8" length (deep) staples with 1/4" crown (across the top). I bought this gun for the purpose of being able to shoot 3/8" deep staples and I can't find them! The Overall ratings I listed are bogus, I haven't used the gun yet. They did not even give samples of the 3/8" deep staples in the original package...but once you tear open that package, try to return it!


Helpful
(4)
Not Helpful
(1)
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   01-Nov-2014 See details.
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends   31-Dec-2014 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2014 See details.
  • Online Only! Extra Savings on select tools, reflected in price shown, Sold by Sears! Offer ends   20-Sep-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x