Specifications & Dimensions
| Dimensions and Capacity: | |
|---|---|
| Crown Width (in.): | 1/4 |
| Overall Dimensions: | 9.5 in. L x 2.3 in. W x 9.5 in. H |
| Dimensions: | |
| Tool Air Inlet Size: | 1/4 in. |
| Product Overview: | |
| Adjustable Depth Control: | Yes |
| Average Air Consumption (CFM): | 2.0 |
| Size Range: | 3/8" -1 3/16" |
| Fasteners Used: | Finishing staples |
| Feed Type: | Strip |
| Item Weight (lbs.): | 2.6 |
| Operating Pressure Range (psi): | 80-120 |
| Tool Min. Hose Size: | 1/4 in. |
| Warranty Detail Link: | craftsman warranty |
| Color: | |
| Color/Finish: | Silver |
| Included with Item: | |
| Case Included: | Yes |
| Package Contents: | 500 - 1/2" Staples, 500 - 3/4" Staples, 300 1" Staples Owners manual and Tool |
| Capacity: | |
| Gauge Range: | 18 Gauge |
| Material Finishes: | |
| Housing Material: | Magnesium |
Overview
Ratings & Reviews
Special
Projects
Product Description
The ¼ in Crown 18 gab Stapler Kit is a Heavy-Duty, No-Nonsense Performer
Including a super-light gun with a magnesium body, the Craftsman ¼ in crown 18 gab stapler kit delivers reduced vibration and exceptional operator comfort, while a unique rear exhaust offers super-quiet operation. Adjustable depth of drive changes fastener penetration with the simple spin of a wheel while sequential and contact trip modes deliver single-fire or bounce-fire operation for the versatility to tackle any job.
The 1/4 in crown 18 gab stapler kit is ideal for upholstery, furniture, cabinetry, trim, molding and paneling applications. The gun shoots 18-gauge staples from 3/8 to 1-3/16 inches in length quickly and easily for multiple-use applications, while the Craftsman warranty delivers protection you can count on.
- The Craftsman 1/4 in crown 18 ga stapler kit weighs only 2.6 lbs. for portability, maneuverability and no-hassle storage
- 0.85 SCFM use at 90 PSI for super-powerful operation
- 1/4-in crown staple width capacity
- Comes with 500 1/2-in staples, 500 3/4-in staples and 300 1-in staples
- Rubber nose tip and oil-less operation
- Bounce-free operatin or single fire use sequential and contract trip modes
- Great for upholstery, furniture, cabinetry, trim, molding and paneling applications
- Super-light gun with solid magnesium body
- Rear exhaust for quiet operation
- Uses 18-gauge staples
- Backed by a Craftsman warranty to protect your investment
- Available for Gift Wrap
Added on February 16, 2009
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
Milford, OH
via sears.com
Well I haven't used this once so, you might consider keeping that in mind. It works and seems to do a good job as expected. There are a few things I didn't like as well...it was hard to gauge just where the staple was going to land, but I am sure I will figure that out once I use it more. The one thing that has me concerned is, the adjustment to set the staple depth didn't seem to work. Again maybe I didn't mess with it enough, but I have a feeling that it's not working.
Richarde5
Amarillo, Tx
via sears.com
This product performs as expected. I have been involved with woodworking professionally since the 70s. At this point, I have shot about 300 staples with it; no jams, easy to use.
JDS5337
, Soouther California
The only reason I did nto give it 5 starts overall is becasue the staple size is misrepresented. They should just say that it uses 1/2" and up, not 3/8" and up. You cannot find a 3/8" staple to purchase anywhere. They go in 1/4" increments. Other than that the gun works as intended.
JDS5337
, Soouther California
via sears.com
The only reason I did nto give it 5 starts overall is becasue the staple size is misrepresented. They should just say that it uses 1/2" and up, not 3/8" and up. You cannot find a 3/8" staple to purchase anywhere. They go in 1/4" increments. Other than that the gun works as intended.
t2green
Fly over country, Nebraska
via sears.com
I have not had the product long enough to give it 5 stars. Over time it may earn them. No problems, plugged it into my small air compressor and I was sticking picture frames together. Depth was easy to set. It did not seem like it was a big air consumer.
whatsthis
, near Chicago
Can't find 3/8" length (deep) staples with 1/4" crown (across the top). I bought this gun for the purpose of being able to shoot 3/8" deep staples and I can't find them! The Overall ratings I listed are bogus, I haven't used the gun yet. They did not even give samples of the 3/8" deep staples in the original package...but once you tear open that package, try to return it!
whatsthis
, near Chicago
via sears.com
Can't find 3/8" length (deep) staples with 1/4" crown (across the top). I bought this gun for the purpose of being able to shoot 3/8" deep staples and I can't find them! The Overall ratings I listed are bogus, I haven't used the gun yet. They did not even give samples of the 3/8" deep staples in the original package...but once you tear open that package, try to return it!
- Qualifying Orders $59 + SHIP FREE Offer ends 10-Jul-2013 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends 31-Dec-2013 See details.
- Online Only! Extra 15% off select tools Sold by Sears! Offer ends 20-Jun-2013 See details.
