Share This Page Print

Enlarge Image

Craftsman  1/4 x 80 in. Band Saw Blade, 14TPI, Non-Ferrous

  Item#  00902625000 | Model#  2625

Create a Review

 Rating 4.0 | 6 Reviews | Write a review
I Own This Add to List

Specifications & Dimensions

Product Overview:
Able to Cut: Metal
Quantity: 1
Blade Length: 80 in.
Blade Width: 1/4 in.
Teeth - Points per Inch: 14 tpi
Warranties & Coverage:
General Warranty: N/A
Materials & Finish:
Material: High Carbon Steel


Ratings & Reviews



Product Description

Stay Sharp with the Craftsman 1/4 x 80 in. Band Saw Blade, 14TPI, Non-Ferrous

Keep cutting with the Craftsman 1/4 x 80 in. Band Saw Blade. It never fails that you'll need a new blade mid-project, so keep a few of these stocked to get the right cut on your non-ferrous metal.

Spare Craftsman 1/4 x 80 in. Band Saw Blades (non-ferrous) are worth their weight in gold, which by the way is one of the metals it will cut through.

  • Craftsman 1/4 x 80 in. Band Saw Blade
  • 14TPI
  • Non-Ferrous
  • This product is:
    • Available for Gift Wrap
    This product comes with:

    Added on July 26, 2010


    Overall, others give this:

    6 Reviews Write a review
    5 Reviewers (83.0%) would recommend this to a friend.
    Overall Rating Breakdown:

    Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
    Those benefits were not conditioned on the positive or negative content of the review.



    Woonsocket, RI

    Nov 5 , 2014
    Worked great

    I've done my homework and what I can say is this blade has done what was expected of it. Bought this as a experiment to see if its worth cutting up radiators to separate copper/aluminum and get more money. The experiment seems to be a fail for other reasons but blade did the work. Ideally from what I have researched the ideal blade speed for cutting soft metals is roughly 500 feet per minute. I was using a fixed speed band saw running 2700 feet per minute. I did not modify the band saw to slow down the blades running speed. I still managed so far to cut up 40 pounds of radiators into 1/2 inch strips. Probably 1000 feet of copper/aluminum cuts combined and the blade is still cutting under these out of norm conditions at a rate of roughly 2-3 inches per second into 2 inch thick radiator. I found that this has its limits. Failed to cut through copper coils and does not do very well at all when cutting through harder metals no matter how thin. Example steel sheets at side of the radiators or small screws. Better to avoid them. For anyone scrapping who's interested in cutting up radiators to get paid more.. Found it to be roughly 1 pound of aluminum for every 1 pound of copper. Ends up making it all worth half again what you would get for copper/aluminum mix but if you account for the cost of your time, cost of blades, wear & tear on your machine, and your electric bill.... Its not worth separating. Continue shopping off the copper U-Joints as you always have and forget about the copper runs within the aluminum fins.

    I would recommend this product to a friend.

    Not Helpful
    Flag this Review


    Kalamazoo, MI

    Jun 3 , 2014


    I would recommend this product to a friend.

    Not Helpful
    Flag this Review


    Jonesboro, AR

    Apr 22 , 2014
    Cuts great!

    I have tried a variety of blades on my Craftsman band saw, and I cut a lot of hard dense woods. This blade is a better blade for cutting this type of wood than any blade I have tried. I cut a piece of Arizona Ironwood trunk that was over six inches in diameter. I would not have tried it with any wood cutting blade.

    I would recommend this product to a friend.

    Not Helpful
    Flag this Review


    Decatur, AL

    Jul 10 , 2013
    This blade not good for cutting paper thin tin.

    If your job is for cutting paper thin tin that want take more than 3 minutes then this blade is for you. I have bought 4 of these blades to cut aluminum bar, 1/4 inch or less, and every one of them went dull after about 3 minutes of use. Started to blame my craftsman saw on it and then realized it is just these tin can metal blades. No temper in them at all. Want ever buy another. Over 18 bucks a piece in store, wasted money.

    Not Helpful
    Flag this Review
    • Members Get 10% back in points on first $500 of each qualifying purchase with a Sears Card. Offer ends   25-Dec-2014 See details.
    • Free shipping! Orders $59 or more Offer ends   31-Dec-2015 See details.
    • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2014 See details.
    • Get Quarter ct tw Diamond Earrings for $24.99 with a purchase of $19.99 or more! Limit 1 per order Offer ends   27-Dec-2014 See details.
    • Need it by December 24. Offer ends   24-Dec-2014 See details.

    Connect With Craftsman

    Shop Your Way Craftsman Instagram

    Sign up for Email Savings

    close x