Share This Page Print

 00921238000  009_21238_CRFT_1  009_21238_CRFT_2  009_21238_CRFT_3  009_21238_CRFT_4  009_21238_CRFT_5  009_21238_CRFT_6
Enlarge Image

Craftsman  10 in. Compound Miter Saw with Stand

  Item#  00921238000 | Model#  21238
Close

Create a Review

 
 
 Rating 5.0 | 11 Reviews | Write a review
Reg Price: $249.99
Savings: $25.00
$224.99
  • Temporarily Unavailable
I Own This Add to List
 

Specifications & Dimensions

Product Overview:
Item Weight (lbs.): 53.0 lbs.
Package Contents: Clamp(s), Dust Bag
Type: Compound miter
Blade:
Blade Diameter (In): 10 in.

Overview

Ratings & Reviews

Special

Projects

Product Description

The 10 inch compound miter saw is powered by a 15 amp motor turning the blade at 5000 rpm. The new, adjustable LaserTrac cutting guide provides the ability to adjust the laser to the left, right or on the cut line. Multi-position twist handle for increased comfort when making angled cuts. Dual-view bevel scale. High visibility miter saw base graphics with 9 positive detents. Saw bevels up to 45 degrees to the left and will miter up to 47 degrees to the left or right. Innovative, portable miter saw stand stores inside base for easy transportation and setup of saw. Features 2 _ in. dust port and electric blade brake. Includes two extensions, stop block, clamp, 40 tooth carbide blade, dust bag and Stand N Stow™ base.

This product comes with:

Added on October 21, 2010

 

Overall, others give this:

11 Reviews Write a review
8 Reviewers (73.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
(0)
2stars
(0)
1stars
(0)

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

 

Benoy

Graham, WA

Sep 4 , 2014
via sears.com
Overall
10" Compound Miter Saw with stand

Like the laser cut line, makes exact cuts easier. Saw works very well. Stand is very handy. I use my shop vacuum on the sawdust side for better sawdust control. Catch bag to small for full day use.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

evereadyd51

Yucaipa, CA

Dec 15 , 2013
via sears.com
Overall
Saw

Very good product. I bought it for a particular job at home

I would recommend this product to a friend.

The reviewer indicated they are affiliated with this product.
Helpful
(0)
Not Helpful
(0)
Flag this Review

lostalien

Pacifica, CA

Dec 29 , 2010
via sears.com
Overall
Craftsman 10" Coumpound Miter was just what I was looking for

I bought this on sale and it did what it was intended to do, cut lumber to size and it did just that. 

I was building a stand to wax skis and snowboard and it came out perfectly. What took the longest was putting the stand together.  This was very tedious and took almost an hour to put together because it came with a bazillion nuts and bolts.  After that I took out a combo square and made sure all the alignments was correct.  The laser uses batteries instead of the supplied power.  Just thought this was weird.  I ended up not using the laser too much and went old school by pushing the blade down to see where it was going to cut before I started cutting.

Other than that I'm very happy with the purchase and can't wait to use it for my next build project.


Helpful
(0)
Not Helpful
(0)
Flag this Review

Anonymous

San Antonio, TX

Apr 18 , 2009
via sears.com
Overall
Perfect

Cutting 2X4s, 4X4s, 1X4s, and 1X6s for a privacy fence overhaul. Cuts wood quickly, cleanly, and smoothly. No kickback. No hesitation. Stand and platform are sturdy and easily portable. Works so well my son-in-law bought one. Exceptional value.

I would recommend this product to a friend.

Helpful
(3)
Not Helpful
(0)
Flag this Review

Goose12

, Michigan

Feb 17 , 2009
Overall
Terrific Saw and Stand combo

For me, portability and compact size are essential. I chose this package because of the good reviews for the saw and the stand n' stow feature. Although the stand may be plastic, it is strong and durable enough for just about anything. The saw was incredibly precise out-of-the-box. No more than a 1/64th off. And, if alignment issues arise in the future, the necessary tools for fixing them are included. (The laser adjustment wrench is also included). Before you purchase this though, ask yourself this question: What is the width of lumber (or trim/molding) for the majority of my cuts? This saw will cut a 2x6 at a 90 degree angle, but will not clear it in one pass when beveled. If you will be making cuts over 6" inches wide, you should consider the 12" miter saw or one of the sliding miters. It should be noted, however, cutting twice on this saw (I had to do this a few times on some 10 in. pine) is fairly easy. Minimal sanding was required on one of the cuts. My only other gripe is the length of the support arms. I wish they were twice as long since longer boards tend to sag toward the floor.


Helpful
(16)
Not Helpful
(0)
Flag this Review

Goose12

, Michigan

Feb 17 , 2009
via sears.com
Overall
Terrific Saw and Stand combo

For me, portability and compact size are essential. I chose this package because of the good reviews for the saw and the stand n' stow feature. Although the stand may be plastic, it is strong and durable enough for just about anything. The saw was incredibly precise out-of-the-box. No more than a 1/64th off. And, if alignment issues arise in the future, the necessary tools for fixing them are included. (The laser adjustment wrench is also included). Before you purchase this though, ask yourself this question: What is the width of lumber (or trim/molding) for the majority of my cuts? This saw will cut a 2x6 at a 90 degree angle, but will not clear it in one pass when beveled. If you will be making cuts over 6" inches wide, you should consider the 12" miter saw or one of the sliding miters. It should be noted, however, cutting twice on this saw (I had to do this a few times on some 10 in. pine) is fairly easy. Minimal sanding was required on one of the cuts. My only other gripe is the length of the support arms. I wish they were twice as long since longer boards tend to sag toward the floor.

I would recommend this product to a friend.

Helpful
(16)
Not Helpful
(0)
Flag this Review

Homeowner86

Chicago, IL

Feb 6 , 2009
Overall
Works great for me

After getting everything out of the box and laid out on the garage floor I was surprised at the number of parts (in a good way). There were some "extras" that are not discussed in the description of the item that make an even better value than I first anticipated. Putting it together took minor effort and the instructions were clear and easy to follow. I have used the saw only a few times, but it works very well. The laser is nice and the cuts are clean.


Helpful
(4)
Not Helpful
(0)
Flag this Review

Homeowner86

Chicago, IL

Feb 6 , 2009
via sears.com
Overall
Works great for me

After getting everything out of the box and laid out on the garage floor I was surprised at the number of parts (in a good way). There were some "extras" that are not discussed in the description of the item that make an even better value than I first anticipated. Putting it together took minor effort and the instructions were clear and easy to follow. I have used the saw only a few times, but it works very well. The laser is nice and the cuts are clean.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review

Jorey

Vancouver, WA

Nov 24 , 2008
via sears.com
Overall
AWESOME

This unit needed to be assembled , but it was very easy, which as a woman I find refreshing. Just follow the instructions step by step. The only confusion ws installing the extensions, so, when putting on the extensions, put the clamp bracket screws into the brackets first and hold them in place on the underside of the saw, then insert the extensions and you'll beable to screw them in snugly. When I checked the accuracy of the fence , blade, and laser they were dead on! UNLIKE the cheaper model #21229 (don't buy that one!, you'll regret it as I did. and will be replacing molding becuase nothing is callibrated correctly) This unit cut like butter , was fairly quiet and the cut was extremely smooth and perfect. It also has the feature of removing the legs and storing them in the stand top, and also a sliding fence for greater control. I would recommend this to everyone who is a DIY'er and seeks perfection as I do. With an entire house to put base and crown molding up, my project will be easy, quick, and perfect with little to no puttying. Thank you Sears for a fine product

I would recommend this product to a friend.

Helpful
(13)
Not Helpful
(0)
Flag this Review

Bighouse

Dracut, MA

Apr 27 , 2008
via sears.com
Overall
Does Every Thing I Need

After years of TYRING to cut straight edges with a skill saw and a old table saw, I just had to get my own Mitre Saw. The stand makes it so easy to work. If your like me I use my garage as a work shop and after I still like to get my Yukon back in it's spot at night. So now those jobs around the house will be a lot easier.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   01-Nov-2014 See details.
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends   31-Dec-2014 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2014 See details.
  • Online Only! Extra Savings on select tools Sold by Sears! Offer ends   04-Oct-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x