Share This Page Print

 00948292000
 00948292000
Enlarge Image

Craftsman  10 in. Digital LaserTrac® Level

  Item#  00948292000 | Model#  48292
Close

Create a Review

 
 
 Rating 4.0 | 18 Reviews | Write a review
Reg Price: $49.99
Savings: $10.03
$39.96

Online Only Price

Reg Price: $49.99
Savings: $10.03
$39.96

Online Only Price

I Own This Add to List
 

Specifications & Dimensions

Dimensions and Weight:
Item Weight (lbs.): 1
Overall Dimensions: 11.6 x 1.3 x 3.94 inches
Product Overview:
Automatic Shut Off: Yes
Laser Classifications: Class IIIa
Laser Type: Dot Laser
Level Edge Material: Aluminum
Leveling Type: Horizontal & Vertical
Number of Beams: 1
Package Contents: 10 inches Digital Level and Manual
Self-Leveling: No
Water Resistant: No
Color:
Color/Finish: Silver
Intended Use:
Indoor/Outdoor: Indoor/outdoor
Measuring Tool:
Measuring Tool Accuracy: +/- 1/4 in. at 100 ft.
Measuring Tool Display Type: LCD
Measuring Tool Range: 10 in.
Case:
Case Included: No
Battery:
Battery Included: Battery Not Included
Battery Type: AAA
Number of Batteries Included: None
Number of Batteries Required: 2
Remote Control:
Remote Control: No

Overview

Ratings & Reviews

Special

Projects

Product Description

Keep It Straight with the 10 in. Digital LaserTrac Level
The 10 in. Digital LaserTrac Level uses digital technology to clearly read the angle of the tool to the 1/10 of a degree. Reads right side up or down. Audible tone identifies angle in 45-degree increments from 0 to 90 degrees.

10 in. Digital LaserTrac Level recalls last 9 measurements, calculates degrees between two angles, projects bright red laser dot accurately to 1/4 in. at 100 feet. Use tripod threads or hang magnetically. Wt. 1.2 lbs.

10 in. Digital LaserTrac Level keeps you straight

  • Catalog/Online Exclusive!
  • Accurate to the 1/10 of a degree
  • Audible tone identifies angle in 45-degree increment

This product is:
  • Available for Gift Wrap

Added on July 26, 2010

 

Overall, others give this:

18 Reviews Write a review
14 Reviewers (78.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

 

cessnadriver

Bloomington, IL

Aug 4 , 2014
via sears.com
Overall
Great little level

I used this little level to install three sets of closet organizers. The level has enough weight to it to not move around and the laser helps set a point on the opposite wall.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

thealaskan63

North Pole, AK

Apr 27 , 2014
via sears.com
Overall
thealaskan63

first electric level, been using the heck out of it

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review
Aug 25 , 2013
via sears.com
Overall
Great value - great product!

Easy to use, great value, great product!

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

Tuffy1946

Jonesboro, AR

Jun 26 , 2011
via sears.com
Overall
Craftsman 10in digital laserTrac level

Great tool perfect leveling no guessing about the bubble or whether the level is acurate.


Helpful
(0)
Not Helpful
(0)
Flag this Review

CouldBeWorse

Austin, Texas

Nov 25 , 2008
via sears.com
Overall
Could be worse

This might be a better level, if...there are a few problems. The red laser on/off button is muy cheesy. The detent stroke is way too long, and I had diffuculty getting detent even with several tries. Finally, but only after about 5 uses, the button just caved in, literally, turned sideways and got stuck in the on position. I had to remove the battery bay and electronics module and use a fishtape to push the button back out. Secondly, the rubber end caps are a hinderance bc/ the bottoms are not level with the body bottom. The level needs to be designed so that you can butt it up next to an orthogonal flat piece and use the bottom end to draw a line with. I also agree with a comment above that contact surface is much too small. Also, it needs a toggle mode to ZERO to get back on to absoute scale without a power cycle. There is some good in this level: It was pretty cool that when I turned it upside down, the numerical readout inverted automatically. Also, the numbers are nice and big and easily readable.


Helpful
(4)
Not Helpful
(0)
Flag this Review

NewLondon

, Unknown

Mar 16 , 2008
via sears.com
Overall
4 stars

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

RickTX

, DFW Texas

Nov 7 , 2007
via sears.com
Overall
Worthless

I purchased this level for the convenience of its size. I'm a state inspector and inspect businesses for compliance with the state's handicap accessibility requirements. My inspections include a lot of slope and cross slope measurements. For years I've been using the craftsman digital smart level and have been very happy with that but when I saw this one in the store and it was only 10 inches long I thought it would be a lot easier to carry around with me. I've had it now for about six months and have never used it for any inspection because it never matches the reading of my original smart level and I just don't trust it. Additionally, calibrating this level accurately has proven to be impossible. At this point this level is nothing more than a novelty, worthless as far as I'm concerned for work.


Helpful
(3)
Not Helpful
(0)
Flag this Review

HomeWoodshop

Houston, TX

Sep 28 , 2007
via sears.com
Overall
Not a precision level

Guess this level would be ok for very rough carpentry but do not expect a precision level. Readings drift at lest .2 degrees. It is NOT flat on upper or lower sides; when set on a ground surface such as a cast iron tabel saw it will rock back & forth (upper & lower sides), has less than 5% contact on a ground surface, warped & humped in the middle of it's length. When turned off & on even with magnets anchoring it to a surface the startup readings will not repeat and vary .2 to .3 degrees. Does not sound like alot but over 5 to 10 to 15 ft spans is significant. Repeatability is NOT good. Had higher hopes but then I remember now why I quit buying much Craftsman. I have a little 2" Wixey digital angle gauge ($45) I use to set blade and fence angles that runs circle around this level as far as repeatability and accuracy. I'll take this Craftsman level back for a refund. Wish I could have written a better review.


Helpful
(2)
Not Helpful
(0)
Flag this Review

ChiefSmakaho

Solomons, MD

Sep 24 , 2007
via sears.com
Overall
Extremely versatile

I purchased this level to use for setting up and adjusting a race car and it has worked awesome. I agree with the last review about the "relative" indicator. At the track I can set the relative zero to compensate for unlevel ground, but there is no way to tell what mode you are in so I continually turn it off and back on to be sure. I have also used it for some retaining walls and landscaping work outside and it works on all but the brightest days. A.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

GadgetBuyer

San Dimas, CA

Aug 7 , 2007
via sears.com
Overall
Great Value

Well made and a great buy. The only oversight the designers did, was to not inform the user on the display that the unit was operating in the relative mode. This could lead to a mistake being made on a small angle measurement if you had accedently pushed the zero button.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   31-Dec-2014 See details.
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends   31-Dec-2014 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x