Share This Page Print

 00936252000-1
Enlarge Image

Craftsman  10 in. Dovetail Saw

  Item#  00936252000 | Model#  990 DS10
Close

Create a Review

 
 
 Rating 4.5 | 19 Reviews | Write a review
Reg Price: $10.49
Savings: $1.05
$9.44
I Own This Add to List
 

Specifications & Dimensions

Product Overview:
Hand Saw Type: Pull/Japanese Saw
Item Weight (lbs.): 0.56

Overview

Ratings & Reviews

Special

Projects

Product Description

11 [TT_TeethPerInch] for fine, smooth finish cuts. Precision ground, polished and tempered steel blade. Hardwood handle with walnut stained finish.

This product is:
  • Available for Gift Wrap
This product comes with:

Added on May 13, 2010

 

Overall, others give this:

19 Reviews Write a review
15 Reviewers (79.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
(0)
1stars
(0)

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise17 found this helpful
Mr-Mac
Apr 18 , 2011
Craftsman 10 in. Dovetail Saw

While this is not one of those hundred dollar saws that the rich people can afford (no, it is a $10 saw, thank you very much) it does tend to cut like one! The teeth are closely spaced together making for a fast cut and they are sharp too!

To date I have only cut a couple of dovetails for practice and they are better than the dovetails I got from my Porter Cable dovetail jig!

Criticism4 found this helpful
Crash1980
Mar 17 , 2012
Good saw, dulls quickly
I have done a fair amount furniture making. This is a great saw for the price, it just doesn't stay sharp relative to other brands for the hard-core. Said 'other brands' cost around $100 though; if you just want to mess around with a dovetail saw without definite plans for extensive furniture making, you should get this - it's like $10. Why not? I don't use this anymore, but I'm glad that I bought it. If someone were to just start making a furniture piece (as a novice) and they asked me for a recommendation, of course I'd say this $10 saw that does everything that's needed (for a short period of time). Do it.
 

DLTools

Duluth, MN

May 9 , 2014
via sears.com
Overall
Fantastic little saw

Largest complaint of this is the handle is a bit awkward to hold but you get used to it. Cuts well and at a good speed that is not too fast nor too slow.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

jewat4491

Sikeston, MO

Mar 28 , 2014
via sears.com
Overall
Good saw

It works well for dove tail and other appl. not as sharpe as some I've tried but for the price it is really good not great but good!!!

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

NickJA

Saunderstown, RI

Mar 15 , 2014
via sears.com
Overall
Good value

This is a good value Dovetail saw to learn with. This should last long enough for you to figure out if you want to embrace hand cut dovetails.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

bob375

Abingdon, VA

Feb 12 , 2014
via sears.com
Overall
Solid feel and sharp.

I like the fit and fill of this saw. I have used it for several type of projects, so cutting dovetails is only one of the many uses this saw can give you. It gave me a very good flush cut as well as a nice trim cut, ect..

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

KinkJarfld

Huntersville, NC

Feb 9 , 2014
via sears.com
Overall
Teaching myself to hand cut dovetails

New to hand cut dovetails, I didn't want to start out spending a lot on a saw. This one seemed too good to be true. You know how they say 'you get what you pay for?' I figured I'd give it a try. After all, at 68 years old I grew up with the Craftsman Brand and always counted on it. When the saw arrived, I couldn't wait to use it. The fit in my hand is comfortable. The blade is sharp and leaves a nice narrow kerf. The back is good and ridged. I've cut two sets of dovetails so far, each one better than the last. For the price, what a great buy. I've very pleased.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

RogelioT

Stockton, CA

Nov 23 , 2013
via sears.com
Overall
Craftsman 10 in. Dovetail Saw

Great saw for the money. Purchased it to make simple box joints for an amplifier cabinet I was building. Makes nice fine straight cuts as all dovetail saws should. Hasn't given me any problems.


Helpful
(1)
Not Helpful
(0)
Flag this Review

philiphoderny1026

Savannah, GA

Jul 31 , 2012
via sears.com
Overall
Craftsman Dovetail Saw

Great saw for the Money! I used it to cut over 160 dovetails making jefferson bookcase boxes with hard maple.  I was going to buy a really expensive saw because I didn't know if a $10 saw would stay sharp enough for the entire job.  I am glad I didn't because this saw did the job well and is still just as sharp as it was when I bought it.  The only down fall is that the handle is a little awkward and uncomfortable.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review

pappy1

Hannibal, MO

Jul 30 , 2012
Overall
excellent smooth finish cuts

This is a handy little saw.  Gives a smooth finish cut for those precise situations.

I would recommend this product to a friend.

Helpful
(3)
Not Helpful
(0)
Flag this Review

fixNmowers

Odessa, TX

Jul 24 , 2012
Overall
Nice cuts

The Craftsman 10" Dovetail saw has 15-teeth per inch which allows fast, fine, smooth cuts. The handle on the saw is comfortable and easy to control during your cuts. The blade is tempered steel which helps increase the life of the blade. This saw may not be a high end saw for professional wood workers, but it is great for the average wood worker and/or the weekend warrior. the saw does create nice and straight cuts. I have not used it enough to test the length of how long the blade keeps its sharpness but for my current needs the, saw is just right. I am increasing my level of wood working as each day passes and for the price, I could not pass up this dove tail saw. I will update my review after I pop through a couple more projects, but currently the saw is doing what I purchased it for...

I would recommend this product to a friend.

Helpful
(3)
Not Helpful
(0)
Flag this Review

Crash1980

Bristow, VA

Mar 17 , 2012
via sears.com
Overall
Good saw, dulls quickly

I have done a fair amount furniture making. This is a great saw for the price, it just doesn't stay sharp relative to other brands for the hard-core. Said 'other brands' cost around $100 though; if you just want to mess around with a dovetail saw without definite plans for extensive furniture making, you should get this - it's like $10. Why not? I don't use this anymore, but I'm glad that I bought it. If someone were to just start making a furniture piece (as a novice) and they asked me for a recommendation, of course I'd say this $10 saw that does everything that's needed (for a short period of time). Do it.


Helpful
(4)
Not Helpful
(1)
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   31-Aug-2014 See details.
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends   31-Dec-2014 See details.
  • Online Only! Extra Savings on select tools Sold by Sears! Offer ends   30-Aug-2014 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x