Share This Page Print

 00910871000  spin_prod_725325501  spin_prod_725325601  spin_prod_725325701
 00910871000  spin_prod_725325501  spin_prod_725325601  spin_prod_725325701
Enlarge Image

Craftsman  10871 13 amp Corded 7-1/4'' Circular Saw 10871

  Item#  00910871000 | Model#  10871
Close

Create a Review

 
 
 Rating 4.5 | 126 Reviews | Write a review
$74.99
$74.99
I Own This Add to List
 

Specifications & Dimensions

Dimensions and Weight:
Item Weight (lbs.): 9
Product Overview:
General Warranty: 1 year
Package Contents: Saw Blade, Blade Wrench, Edge Guide and Case
RPM: 5000
Saw Type: Inline
Voltage: 120
Handles:
Handle Type: Ergonomic Soft grip
Cord:
Cord Length (ft.): 8
Blade:
Blade Size: 7-1/4 in.
Motor-Engine:
Amps: 13
Speed Capability: Single
Convenience:
Dust Blower: Yes
Tasklight: Yes
General Features:
Arbor Size: 5/8 in.
Arbor Type: Locking
Shoe Lock Type: Adjustable lever
Cutting Tool:
Adjustable Cutting Depth: Yes
Blade Bevel Range: 0-51.5 degrees
Cut Depth At 45 Degrees: 1-13/16 in.
Cut Depth At 90 Degrees: 2-3/8 in.
Guide Included: Yes
Case:
Case Included: No

Overview

Ratings & Reviews

Special

Projects

Product Description

Get Precise Results with the 13 Amp Circular Saw from Craftsman

The Craftsman Corded 7-1/4'' Circular Saw 10871 comes equipped with a 13 Amp motor and 24-tooth carbide tipped blade. With its powerful motor and sharp blade, you can effortlessly take on crosscuts, ripping, beveling and plunge cuts. Its ball-bearing motor delivers 5000 RPM to saw through a variety of hard and soft woods. Over-sized locking levers allow you to adjust the beveling capacity so you can make angled cuts with ease.

User-friendly features such as the ergonomically-designed hand and soft grip make the 13 amp circular saw comfortable to use on the job site day after day. An LED work light helps you cut straight on the line even if lighting is poor. Powerful and reliable with a Craftsman one-year warranty, this saw is a must-have tool for pros and hobbyists alike.

  • The Craftsman Corded 7-1/4'' Circular Saw 10871 is a versatile and user-friendly tool
  • The 13 AMP motor provides 5000 RPM for precise and reliable performance
  • The kit includes a 24-tooth blade and blade wrench to start work immediately
  • Ergonomic handle and built-in dual bulb LED work light make sawing and cutting effortless
  • Designed for durability, the saw has cast aluminum upper and lower blade guards
  • On-board tool storage helps to keep essentials within easy reach
  • 120V AC corded saw with a cord of 8ft.
  • The 7-1/4 in. blade has 24 carbide tipped teeth and offers a bevel range of 0-54.5 degrees
  • Some assembly required
  • Weight 17.32 lbs
  • One year limited warranty

This product is:
  • Available for Gift Wrap
This product comes with:

Added on July 26, 2010

 

Overall, others give this:

126 Reviews Write a review
109 Reviewers (87.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise22 found this helpful
Mr-Mac
Mar 9 , 2011
Craftsman 7 1/4" 13 amp circular saw

I was working on tearing down my old deck to prepare for the new one and in the process my trusty old Craftsman 2 hp circular saw gave up the ghost. The good news, if such a thing is possible at that point, is that my saw died after it finished the last cut I needed from it. Rest in peace, my old friend, rest in peace.

Out with the old and in with the new!

I went to Sears today and was mulling over my choices for a new circular saw. I saw the usual suspects hanging on the display wall, Skil, DeWalt, Craftsman, Porter Cable, Bosch and so on. I picked up the Evolv saw and at $40 it was sure light and anemic feeling. Skil was better and DeWalt was okay as well, but the Craftsman 13 amp saw had many more features than either of these two and the price was parked right in the middle. The choice was clear.

I got my new saw home and opened it up. According to the wife I am somewhat of an enigma in that despite the fact that I am a guy, the first thing I do is look at the owner's manual. I'm a guy who has worked as a design engineer and a tech writer and know the importance of understanding a tool before you ever employ it!

There are several features this saw boasts at the $70 price point that saws priced 50% can't claim and that's what makes this an even better bargain. How many circular saws have you seen that can cut past 45? on purpose? In other words, this saw can cut 52? and you can confirm that by looking at the bevel gauge!

A couple of other huge features for me are the adjustment levers. My old saw had small wing nuts at the points of adjustment and for a guy with big hands they were not all that easy to get to. This saw eliminates that issue for me with two large paddle style levers that are long enough to provide the torque needed to lock it in place without too much effort on the user's part! Simple, but nice!

Another key feature for me is the handle. Again, I have large hands and not all tools fit all hands! The old saw's handle was pretty thin and my fingers would wrap all the way around and using the saw would be uncomfortable after a few cuts. The new saw has a much larger grip and the front assist handle is more than just a pommel style and is well placed.

If those features were the key features of this saw then I'd still be pleased at the $70 (minus 10% for my military service) price, but, we have more to go!

The cool things about this saw that my old eyes love is the Laser Trac(C) laser and the work light! Thank you, Sears and Craftsman! How long did we have to deal with sawing a straight line and needed to see past the dust to where we're going with the blade and fund that at the end of the job we were out of breath trying to keep it in a straight line? The laser is cast forward of the blade and makes it easy in any light to see!

Some really cool things about this saw are the top mounted laser on/off switch, an onboard wrench, the spindle lock button, well marked bevel gauge and a really cool depth of cut scale on the back of the housing and an 8-foot cord! There is an optional straight edge guide slot and there is even a way to fine tune the saw to a perfect 90? cut with a set screw!

Assembly was pretty straight forward as you can imagine since the only thing you need to do is install the blade. The on board wrench locks in well and takes a little effort to draw it from it's perch (that's a good thing) and the spindle lock makes loosening/tightening the spindle clamping screw a cinch! The blade itself is carbide tipped with 24 teeth and is a general purpose blade that, while it won't win any awards, will cut through a 2x4 in a heartbeat!

Using the saw is nice s there isn't anywhere near the vibration of my old saw with a new blade in it. A few 2x4s with it and your hand tingles a bit and your arms hurt from the weight. At just over 17 pounds this saw is a good three pounds lighter than the old but that lighter weight is important after a day of use!

So many features on this saw and any other retailer might push the price to over $100 but Craftsman understands its customers and chooses to keep costs down and they did a great job with this one!

Criticism6 found this helpful
galenval
Apr 28 , 2013
Unsafe!
I have a 20 year old Craftsman circular saw. It works fine. It has a safety switch which must be depressed by the thumb before the trigger will engage. This is a VERY IMPORTANT safety feature. When you carry the saw around, you cannot accidental depress the trigger and start the saw. The new saw does not have this safety feature. The area on the handle reserved for the safety switch is now occupied by the laser switch. A VERY BAD trade off. Also, when I made a cut and set the saw down on the concrete garage saw, the guard STUCK in an open position and now I have a gouge in my floor. Everyone who is experienced with power tools recognizes that the circular saw is the most dangerous of all powered hand tools. There is simply no way to be too careful with these saws. They will take your fingers or cut your leg half way through in an instant.. This tool was obviously designed by someone who had no knowledge of these saws This is a dangerous product and will be going back to the store.
 

dominojones

Olympia, WA

Dec 7 , 2014
via sears.com
Overall
Good price - quick service!

This is the circular saw that was the best price with the highest rating. My husband hasn't used it yet but I know he will really like it since the saw he has is only a 6". He prefers Craftsman merchandise.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

frumious

Anchorage, AK

Dec 4 , 2014
via sears.com
Overall
Accurate cuts. Good power. Perfect weight

This is the second circular saw I have purchased this year; one for each of my two young adult daughters. Neither girl has a boy friend that knows lefty-loosie or righty-tightie so I am equipping my girls with tool kits and slowly teaching them how to use them. Both saws cost about the same price. The first was a 15 amp S--L Saw. While it seemed well built, three things about it bothered me: It was somewhat heavy, the safety button was very hard to operate with the trigger, and worst of all neither the V notch guide nor the laser guide lined up with the blade. The guides were not adjustable. This resulted in bad cuts, wasted wood and do-overs. This 13 amp Craftsman has none of these problems. It is nearly two pounds lighter - that is significant - yet is rock-steady and has excellent balance. The trigger is easy and safer to operate. But best of all, this saw cuts accurately: The V notch guide is adjustable to your preference for cutting either to the left or to the right or through your pencil line. The laser guide and blade line up perfectly. I am also impressed by the saw's power: It cuts as strongly as the 15 amp saw. The fit and finish is good for a $70 saw. The overall feel in your hands is one of comfortable control. While only time will tell, this feels like a saw that is likely to provide years of good service. My only disappointment (and hence my one star deduction) is that, contrary to the write-up in this site, the saw does not come with either a case (nor bag) or a rip guide. The box contained just the saw, a 24 tooth carbide tip blade (a decent one) and a blade wrench. Fortunately, I had an extra tool bag and a spare rip guide that fit.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

JackisNeedy

Marion, IN

Nov 21 , 2014
via sears.com
Overall
Circular Saw Really Cuts

A terrific electric circular saw. Maybe a bit pricey though for something made in China. It would be better if made in USA.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

WestsideHandyman

Culver City, CA

Nov 15 , 2014
via sears.com
Overall
Great saw.

This saw is a very well made saw. It makes accurate cuts and is very powerful and versatile. If you are only going to have one saw in your arsenal, this is the one to have. I have a table saw, a 10" Craftsman sliding compound miter saw, a worm drive saw, and two other circular saws neither of which is nearly as good as this one. 2 yrs ago I bought the Bolt-On system with the trim saw (and almost all the other attachments too). I rarely use this saw now because for most of what I cut, the little trim saw works fine. I have owned/used many circular saws over the years. I like this one the best!

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(2)
Flag this Review
Nov 3 , 2014
via mobile
Overall
Great

Works great! Always buy this brand

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review
Oct 24 , 2014
via sears.com
Overall
Solid quality product

A very good standard saw, should serve me well for many years!

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

JJ5

Concord, NC

Oct 12 , 2014
via mobile
Overall
Great purchase

Saw works great

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

OversJandA

Knoxville, TN

Sep 30 , 2014
via sears.com
Overall
Great saw

Needed this to cut an inside door and it did just the trick with no problem. Glad to have the addition to our tool set! Price was very acceptable.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

waynerogan

Shingle Springs, CA

Sep 17 , 2014
via sears.com
Overall
circular saw

This was the first new circular saw i've owned in quite a few years and was very pleased with the way it cut..... not sure why i waited so long to get a new one.. should get many years of use out of it.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review
Sep 15 , 2014
via sears.com
Overall
Very Good Saw

This is a very good saw for someone who needs a tool to do light framing or finishing. It has a light that is handy if you are working in an area with limited light and a laser to make longer cuts (the laser really does not help for cutting framing boards). A saw for the price.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   31-Dec-2015 See details.
  • Get Quarter ct tw Diamond Earrings for $24.99 with a purchase of $19.99 or more! Limit 1 per order Offer ends   31-Dec-2014 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2015 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x