|Fence Size (HxL) (In):||2 1/8'' x 7 3/8'' (Left), 2 1/2'' x 7 3/8'' (right)|
|Table Dimensions (LxW):||18 in x 6 1/2 in (diameter)|
|Table Dimensions with Extensions:||18 in x 6 1/2 in|
|Crosscut Capacity - 0 Miter 0 Bevel:||2 5/8 in x 5 1/2 in|
|Crosscut Capacity - 0 Miter 45 Left Bevel:||1 1/2 in x 5 1/2 in|
|Crosscut Capacity - 0 Miter 45 Right Bevel:||NA|
|Crosscut Capacity - 45 Miter 0 Bevel:||2 5/8 in x 3 7/8 in|
|Crosscut Capacity - 45 Miter 45 Left Bevel:||1 1/2 in x 3 7/8 in|
|Crosscut Capacity - 45 Miter 45 Right Bevel:||NA|
|General Warranty:||one year|
|Item Weight (lbs.):||28.44|
|Package Contents:||Blade, Blade Guard, Clamp(s), Dust Bag, Blade Wrench|
|Preset Miter Angle Detents (Deg):||0, 15, 22.5, 31.6, 45 L&R|
|Quick Release Vise:||No|
|Cord Length (ft.):||6|
|Cord Management:||Manual Wrap|
|Blade Diameter (In):||10|
|Motor Brushes:||Consumer replaceable|
|Guides & Instructions:|
|Arbor Size:||5/8 in.|
|Miter Index:||45 deg. Right/Left|
|Bevel Index:||0-45 deg.|
|Blade Bevel Range:||0 and 45 deg. adjustable|
|Cut Depth At 45 Degrees:||1-1/2 in.|
|Cut Depth At 90 Degrees:||2-5/8 in.|
|Miter Detents:||0, 15, 22-1/2, 31.6 and 45 deg. left/right|
|Table Material:||Die cast aluminum|
|Assembly Required:||Assembly Required|
Ratings & Reviews
10" Compound Miter Saw Cuts with Perfect Precision
Expect precise, extra-clean cuts every time with the Craftsman 10" Miter Saw. This 15-amp electric miter saw features a 40-tooth carbide tip saw blade that stays sharp, and cutting boards up to 2"x6" and 4"x4" will be quick and easy. At just over 28 pounds, this saw, made from die-cast aluminum, is lightweight and easy to move to and from your project. Just right for both the do-it-yourselfer and the construction veteran, this miter saw is accurate and user-friendly.
This 10" compound miter saw with trigger control features Laser Trac, which projects a line on your task so you can align everything just right before you cut. The blade bevel range is adjustable 0 to 45 degrees, while the fence includes a right-side scale for 1/16" incremental measurements to help you achieve precisely the results you want and get your project done right. With 15 amps, this saw has a speed range of 4800 RPMs to keep you moving effortlessly through your work.
- The Craftsman 10" Miter Saw with its 10" 40-T carbide tipped blade stays sharp and makes clean cuts every time.
- Strong 15.0 amp, 120 volts, 60 Hz, 4800 RPM motor has the power needed for the quality work you want.
- Laser Trac projection for more accurate cuts
- Made from die-cast aluminum and weighing only 28.38 lbs, this saw easily moves with you.
- The kit includes two AAA batteries, a hold-down clamp, a dust bag, and a blade wrench; everything you need to get started on your project.
- Adaptable cutting up to 2"x6" or 4"x4" boards at 90 degrees
- Fence features a right side scale 1/16" for easy measurements.
- Craftsman Warranty
- Minor assembly required
Added on April 15, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
Las Vegas, NV
Purchased this saw for my husband at Sears and he loves it! It took a little assembly before being able to use it. Saw works great for cutting baseboards and is a nice size so that it doesn't take up the entire garage.
Purchased this saw to do some crown molding work around the house. Had no problems cutting through the 7 inch molding. I would recommend this item to friends.
Pinellas Park, FL
I just unboxed this and the battery cover for the laser does not close with the batteries inserted. There 2 big screws that hold the battery holder onto the saw. The screws are too big and make the batteries not sit deep enough. This is obviously a design flaw. Returning and not taking my chance on buying a Craftsman.
Munds Park, AZ
This is the second time using this saw and today the trigger pull assembly broke. It is held on with 2 bolts and a very, very cheap plastic bracket. This is an inferior, dangerous design as you are applying pressure while lowing the handle/trigger-pull that operates the saw blade. The bracket should be made out of metal. Won't buy another Craftsman product from this point on.
Sioux City, IA
My model is three years old, just outside the extended warranty... Has maybe 15 minutes of operational use. The handle broke off and is now hanging by the wires. Cheap plastics are to blame to this. The mount should at least been secured or strengthen with metal since it is a pressure point for wear. Very disappointed to spend my money on this kind of 'quality'. While I do not know the quality of the new miters, this is merely a warning of Craftman's lack of quality and thought in this product. But, the blade and motor still function as intended and show no lack in competence when cutting.
I have a larger dual bevel miter and it is a bit heavy. I went to sears look for a smaller miter..I both the 10" miter for its mobility. The price great and as always craftsman tools are warranty for 1-5 years depending on the tools u buy.. 80% of my tools come from craftsman. You will like the price.....I always brows the store of websites for good deals from sears tools. Be cool people.
- Members Get 10% back in points on first $500 of each qualifying purchase with a Sears Card. Offer ends 25-Dec-2014 See details.
- Free shipping! Orders $59 or more Offer ends 31-Dec-2014 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends 31-Dec-2014 See details.
- Need it by December 24. Offer ends 24-Dec-2014 See details.