Share This Page Print

 00927683000  spin_prod_725521701
 00927683000  spin_prod_725521701
Enlarge Image

Craftsman  12-amp, 2-hp Fixed/Plunge Base Router with Soft Start Technology

  Item#  00927683000 | Model#  27683
Close

Create a Review

 
 
 Rating 4.0 | 54 Reviews | Write a review
$207.99
$207.99
I Own This Add to List
 

Specifications & Dimensions

Product Overview:
Item Weight (lbs.): 13
RPM: 25000
Variable Speed: Yes
Color:
Color/Finish: Black/silver
Motor-Engine:
Amps: 12.0
Speed Capability: 6 speeds
Convenience:
Dust Blower: Yes
General Features:
Collet Chuck Size: 1/4 and 1/2 in.
Cutting Tool:
Micro Depth Adj.: Yes
Plunge Lock Control: Yes
Type:
Type: Fixed/Plunge
Package Includes:
Package Contents: Worklight, Wrench, Cutting Guide

Overview

Ratings & Reviews

Special

Projects

Product Description

The 12-Amp Base Router with Soft Start Technology

The Craftsman 2 hp dual base router powers through the toughest tasks while delivering a maximum speed of 25000 RPM. Six variable speed adjustments adjust from veneer to soft to hardwoods and plastics, while the ergonomic handles help limit vibration, even after hours on the job.

This 12 amp base router with soft start technology allows you to switch between a plunge and fixed bases fast, so you can swap from trim routing to carving dados, without wasting time. Equipped to work with ¼ and ½ in. collets, built tough and powered by a 2 hp motor, this router is ready for anything. Toss it on your workbench, and get to work with Craftsman.

  • Craftsman 2 hp dual base router includes :1/2 and 1/4-in. collets, 2 router bases, edge guide, 2 vac adapters, wrench and case
  • Easy portability gets the job done anywhere
  • Soft start slowly increases speed to help eliminate router take-off
  • Permanently sealed motor with 6 variable speeds from 10,000 to 25,000 rpm and electronic feedback control to ensure proper rpm for different bit sizes
  • Dual full-view window and front/rear chip deflectors deliver clear visibility

This product is:
  • Available for Gift Wrap
This product comes with:

Added on March 05, 2011

 

Overall, others give this:

54 Reviews Write a review
40 Reviewers (74.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise12 found this helpful
Hoerschy
Aug 15 , 2013
Good Router At A Great Price
I bought this router a couple of years ago on Black Friday at a terrific price. Ordered on line and then picked it up at the store. Avoided all of the crowds. It has a lot of power for a 2 hp unit. I thought that I would need a 3 hp router but this one surprised me. I have used it to route raised panel doors and all that you have to do is slow it down because of the size of the bit. I have the fixed base mounted to a plate that I have mounted in my table saw extension and use it mostly there. The only problem that I have had is accurately adjusting the height of the but. I followed the instructions but the body is either too tight or too loose in the base to adjust to where I need it. Now I have some teeth broken off on the adjustment bar. If it wasn't for this, I would have given it the full 5 stars.
Criticism15 found this helpful
Ahlvin74
Jan 7 , 2012
Router OK, but sub-plate issue

I purchased this router along with a craftsman router table and a box of craftsman router bits for a project I was working on. Everything went fairly smooth until I went to put a bit in the router. The bits that I wanted to use (3/8" round over) will not fit in the router sub plate that comes with the router. I went online to order a different sub plate with a larger hole and the only one I could find is the 6 piece set and come to find out that it is ONLY sold in Canada and they will NOT ship to the USA. In fact if you buy this router (or any router for that fact) from Sears and buy the bits you will not be able to use the larger bits because they are too big for the plate. They do not sell another plate in the U.S. I am not totally sure what they expect us to do. I did manage to get the 6 piece plate set but it was only because I know someone in Canada and I had it shipped to them and then they in turn shipped it to me. Unless you have a drill press and want to make your own plates I would suggest buying a DeWalt or Bosch or one of the name brands that actually sell plates in the U.S.

 

I always liked Craftsman tools and am in the market for a new table saw, but I think I may shop elsewhere for my tools from now on, customer service on the phone was useless as well, overall I was completely dissatisfied with this experience!

 

FloridaJan

Okeechobee, FL

Oct 11 , 2014
via sears.com
Overall
2HP fixed/plunge base router 12amp

I got this for shaping new baseboard & my hobby sign making & after my husband tried it in one of his tables I have trouble getting it back to use it. He has others that just don't have the plunge and he is getting more use out of it than I have had a change to. Great price.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review

loganlar38

Associate

Albany, NY

Sep 17 , 2014
via sears.com
Overall
Great Router for the price

I used the router on over 600 board feet of select pine on my router table. I create v groove tongue and groove 1 by 8 planks. The router ran great was easy to micro adjust, never heated up of bound on knots.


Helpful
(4)
Not Helpful
(0)
Flag this Review

JoeBl

Midland, MI

Aug 26 , 2014
via sears.com
Overall
Poor Quality

I bought a Craftsman router about 1 1/2 years ago. At the time I didn't have a big project going so I barely used it. Now after just getting into a project, the router failed--and I was using on OSB, so there shouldn't have much strain on it. I will never again buy a Craftsman power tool. They won't stand behind them at all.


Helpful
(0)
Not Helpful
(4)
Flag this Review

J66

Aug 20 , 2014
via sears.com
Overall
12 amp, 2 HP Fixed/plunge Base Router with Soft Start technology

I purchased this item because I required a larger collet ,(1/2"), for several of my router bits. I own two other Craftsman routers, and they perform great. The soft start when the router is powered up, makes it easy to hold onto, and easer to guide into the work piece. The three LED lights do a great job of illuminating the cutter as you feed it into the wood. The clear plastic shields work great to keep wood chips and dust out of you eyes. The 2HP is more than enough power to allow you to feed the cutter into the work piece fast enough to prevent burning the wood. The depth adjustment leaves a little to be desired. My older two routers have a better adjustment system, that allows adjustments in small increments that are very accurate. I had a difficult time setting the cutter depth using the device as the instruction suggest. I had to zero the cutter bit with the base, and use a scale to set the depth. I like this router, because of the soft start, power, work light, collet size, and the two bases, the fixed base, and the plunge base. This router did what I required on my project, and did it well. I would definitely recommend this produce to anyone requiring a router.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review

matt3333

Associate

Oak Park, IL

Aug 12 , 2014
via sears.com
Overall
great router

This router is has been great so far have only owned a couple months but has handeld every job i've used it for without question. I would recommend this router for your wood shop!

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review

preditor2525

Rancho Cordova, CA

Aug 7 , 2014
via sears.com
Overall
Routing combo

I have an older sears router (10 yrs w/ only switch replacement ), fixed base that i decided to upgrade. In combo I also purchased the pro router table and cabinet. The combo works perfect together as the fixed based is mounted to the table and the plunge is for outside work. Though my other router works fine, this combo has many other new features. The soft start is fantastic as it doesn't want to jump out of your hands like the older one. Inlays are a breeze and the vacuum adapter is a welcome plus. I had no problems as other reviewers stated. Adjustments are more precise, and overall use is just easy. Switching from table to plunge is just a flip of the lever and a button. With variable speed, micro adjust, etc, you can't go wrong for this price.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review
Jun 30 , 2014
via sears.com
Overall
Works as advertised, no problems

Bought this to replace a much older Craftsman with a collet problem, The two collets supplied with this are much more substantial AND replaceable. Soft start works well,work light is good. Depth adjustment is a bit fiddly, not to be depended on for accuracy but stable once clamped. No trouble with bit insertion or removal.

I would recommend this product to a friend.

Helpful
(5)
Not Helpful
(0)
Flag this Review

JimG_SoCal

La Mirada, CA

Jun 1 , 2014
via sears.com
Overall
Great Router

Really happy with this router. Love the easy adjustments and variable speed control. Have since added a router table and this unit bolts on easily.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review

appeltjacks

Lexington, KY

Apr 30 , 2014
via sears.com
Overall
just need to use it more

I bought this router on sale and used gift cards. It was kind of an impulse buy as I do not need it much yet. I cut out a hole in a countertop for a sink and routed the edge. Worked great. Now I just need to find time to use it more extensively

I would recommend this product to a friend.

Helpful
(5)
Not Helpful
(0)
Flag this Review

bl3

Janesville, WI

Apr 12 , 2014
via sears.com
Overall
great tool

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(1)
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   31-Dec-2015 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2014 See details.
  • Get Quarter ct tw Diamond Earrings for $24.99 with a purchase of $19.99 or more! Limit 1 per order Offer ends   31-Dec-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x