Craftsman 12'' Drill Press with Laser and LED LightItem# 00934985000 | Model# ZJQ4116D
|Length (in.):||Drill: 12|
|Table Dimensions (LxW):||10-1/8|
|Chuck Size:||5/8 in.|
|General Warranty:||1 Year|
|Item Weight (lbs.):||80.47|
|Number of Speeds:||12|
|Package Contents:||Fence, Tasklight, Hardware Pack, Assembly Instructions|
|Spindle Travel (in.):||2.44|
|Table Tilt (Right and Left):||Right 45 deg. - Left 45 deg.|
|Number of Handles:||3|
|Cord Length (ft.):||6|
|Cord Type:||18 gauge|
|Handling & Operating:|
|360 deg. Swivel Head:||Yes|
|Onboard Key Storage:||Yes|
|Table Material:||Cast iron|
|Housing Material:||Cast Iron|
|Base Size (in.):||16.54 x 9.84|
|Column Diameter (in.):||2.28|
|Assembly Required:||Assembly Required|
Ratings & Reviews
The 12" Drill Press with Laser and LED Light Gets it Done Right
Cut holes in steel, aluminum, wood, plastics and more with ease and precision with the Craftsman 12" drill press with laser and LED light. Made with a rigid frame and positioned on a sturdy steel post, this drill press uses a powerful 1/2 HP motor to spin anywhere between 355 and 3065 revolutions per minute. It powers through metal and rips through wood with speed and accuracy. Featuring smooth turning at high speed and high torque spindle settings, this drill press is designed for sharp and consistent results.
You can count on this 12" drill press with laser and LED light to move fluidly from project to project, helping you get more done with laser precision on every job. Perfect as a bench top or temporary jobsite accessory, this press features a fast swapping depth adjustment along with both X and Y axis pin point positioning, delivering the finesse that precision machining requires. So whether you're kicking up saw dust, cutting slots for a mortise-and-tenon frame, twisting out metal shavings while drilling bolt holes or giving that carving a super smooth finish with a sanding drum, you'll always get long-lasting and accurate operation. A solid addition to any bench, this tool is adjustable, adaptable and built to last.
- The Craftsman 12" drill press with laser and LED light features a powerful 1/2 HP motor to spin anywhere between 355 and 3065 revolutions per minute
- This drill press boasts a fast swapping depth adjustment along with both X and Y axis pin point positioning
- Solid steel and cast iron construction
- Rugged heavy duty construction for vibration-free operation
- 1/2 HP motor, 4.8 amp
- 12 spindle speeds 355 to 3,065 RPM
- Spindle travel 2.44 in.
- Cast iron table with roller extensions
- Laser guide and LED work light
- Includes 5/8 in. chuck key and Allen wrenches
- A solid addition to any bench, this tool is adjustable, adaptable and built to last.
- 1-year limited warranty
Added on November 06, 2012
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
I have been a die-hard Craftsman fan most of my life. My workshop is stocked with old Craftsman tools and I have always been a believer in buying American tool when I can. Up till now, I have had no regrets. I bought this drill press after my 15 year-old Delta finally died. I drove to Sears, looked at the floor model and decided I would give it a try. It's been a few years since I've bought a new power tool from Sears, but I figured it was worth a shot. I'm not sure what's happened over the years, but this drill press was nothing short of horrible. Once I got it home, I pulled everything out on my workbench and started assembling everything. When I got it all together, the laser light didn't work at all. Nothing. Ok, I can call Sears in the morning and get a replacement laser, I guess. I plugged the unit to fire it up and not only was it noisy, but the chuck was so out of alignment, when I tried to drill into a test-piece of wood, the whole table would shake from the drill bit not turning straight. This is a joke, right? How can someone take a drill press seriously if it won't even drill straight?? The press mechanism was stiff and the housing covering the pulleys was flimsy. In fact , the whole assembly was cheap and wasn't even assembled straight at the factory. Speaking of the factory, is it even in the USA anymore??. I gave up, boxed everything up, and returned it to Sears. Bought another drill press from another competing hardware store and couldn't be happier. Sorry Craftsman, I'm done with you.
Overall quality is good. I like the led light which is bright and position adjustable. The laser sight was easy to adjust. I do not like the fact that when tightening the table height that the table changes position. The casing at the clamp seems lacking and thinner than it should be.
Huntington Beach, CA
Sterling Heights, MI
Great drill press, but the LED light failed before the warranty expired and after only about 10 hours of actual use. Craftsman and Sears won't even reply to my emails and a new LED light is over $65 from Parts Direct. I love the drill press, but the warranty and replacement parts prices are a definite turn-off.
I was very impressed with the construction and materials. The major pieces are cast iron including the table height crank arm - no plastic to break. I love the ability to raise and lower the table with the crank. I was impressed also with how easy it is to adjust the belts for changing the speed: loosen two knobs, change the belt positions on the pulleys then tension the belts with the adjustment lever and tighten the knobs. Very simple and rugged. I also like the chuck as it accepts bits up to 5/8" but it will not hold bits smaller than 7/64" The lasers are easy to use also. So simple that you have to use them to appreciate them: simply turn each of the two lamps until the lines intersect where you want to drill. The work lamp is a bright LED on the end of a flexible stalk that positively holds it's position. Assembly is easy too. Put the column on the base; put the table on the column; install the head assembly; screw the feed handles on; install the chuck; install the flexible lamp; you're done. It probably took me 30 minutes. My drill press has the 1/2 HP, 3.5 amp motor. I have bought Craftsman products in the past and this one does not disappoint. I wish I had this a long time ago.
Round Lake, IL
I picked this drill up today after making the online purchase last night. Typically, my litmus test for a well built tool is whether it has a respectable weight. This did. I started to assemble immediately upon getting the drill home. Several of the parts are secured with hex screws, and it was shortly after putting light to moderate pressure on one of the included hex wrenches that the wrench snapped in half. I thought is was curious that the wrench was made from obviously cheap metal, but whatever, I have good hex wrenches. Back to work. With most of the drill assembled, I discovered that the motor housing was missing one set screw that secures the assembly to the base. Plan for tomorrow - go back to Sears and see if they can provide another screw - move along. The last couple steps involve installing the belts and tightening. I decided on one of the 12 speed options, installed the belts, and begin to turn the tightening lever. With not much force applied, I hear a cracking sound - it seems there is a ring that is attached to the tightening lever that moves the motor assembly in order to tighten the belts. I was able to get to the ring, and found that it was cracked in half. New plan - back to Sears tomorrow for a refund. The moral of the story: the surface appearance of quality often hides the poor materials underneath. This drill looks like it's made of quality machined steel, but I can only describe some of the critical inner components as cheap "pot metal". I'm normally a Craftsman supporter, having many other Craftsman tools that have served me well. This drill, however, is definitely of very questionable quality.
This was a gift for husband. He asked for this particular one. He has used it a few times so far and it works wonderfully. He can drill 1/2 inch holes in heavy glass bottles for decorations and is next going to re-do his BBQ grill as the wooden slats on shelves and bottom rack have deteriorated. He has broken both wrists in the past so they do not work as well as he would like, but is able to use this drill press with ease!
- Free shipping! Orders $59 or more Offer ends 31-Dec-2014 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends 31-Dec-2014 See details.