|Blade Length (in.):||99.75|
|Table Dimensions (LxW):||15.75 x 20.375|
|Adjustable Height of Cut:||8|
|ENERGY STAR Compliant:||No|
|General Warranty:||1 Year|
|Guide Type:||Upper and Lower Guards|
|Item Weight (lbs.):||160|
|Lock On Switch:||No|
|Maximum Blade Width (in.):||0.25|
|Maximum Width of Cut (in.):||13.625|
|Minimum Blade Width (in.):||0.75|
|Number of Speeds:||2|
|Number of Wheels:||2|
|Package Contents:||Bandsaw w/ blade installed, Table, Open Stand, upper Table Trunnion Assembly, Bi Lingual Manual|
|Quick Release Blade:||No|
|Resaw Capacity (in.):||8|
|Saw Type:||Stationary Band Saw|
|Circuit Amp Rating:||15 amps|
|Cord Length (ft.):||7|
|Cord Management:||Manual Wrap|
|Cord Type:||18 gauge|
|Blade Size (in.):||99.75|
|Blade Speed (SFPM):||1620/3340|
|Speed Capability:||2 speed|
|Guides & Instructions:|
|Table Height From Floor (in.):||41|
|Table Material:||Cast iron|
|Table Tilt (Right and Left):||Right 5 deg. - left 45 deg.|
|Assembly Required:||Assembly Required|
Ratings & Reviews
This 1-Horsepower 14-inch Band Saw Has Some Serious Kick
With its 1 HP dual 120/240 voltage motor and nearly 100-inch blade length, this Craftsman 14-inch band saw can tackle any serious cutting job. Built on a large, sturdy cast-iron base, this machine offers stability and flexibility with its 45-degree tilting table. For even more control, the band saw offers two blade speeds ‒ one for cutting wood and one for other non-ferrous materials ‒ turning it into a multi-purpose tool.
Heavy-duty jobs are no task at all for the 14-inch band saw, owing to its versatility. Most importantly, it has the extra details that make a band saw user-friendly, like two dust collection ports in two different sizes, a 7-foot power cord, upper and lower guards and straightforward owner assembly. As an added bonus, the saw has an 8-inch resaw capacity and ball bearing guides to help reduce friction and lengthen blade life. Backed by a Craftsman One Year Limited Warranty, you can feel confident about your purchase.
- Use the Craftsman 14-Inch Band Saw for your woodworking needs and then some
- To cut different materials, the device offers 2 blade speeds: 1620 and 3340
- Two dust collection ports ‒ one at the back and one at the front ‒ are 2-1/2 in. and 4 in. deep, respectively
- This saw has a standard 3/4” x 3/8” miter slot
- A sleek, grey exterior means it fits well in any workroom
- Weight: 160 lbs.
- Dimensions: 33” W x 68” H x 21-5/8” D
Added on April 05, 2012
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
I've owned this saw for a little over a year now. It's a quality machine that puts up with me and my demands quite well. PROS: Great resaw height without a riser block. 8" from the factory. If I had to resaw anything bigger than that, I would want more horsepower and table space anyway. Good upper and lower guide system. The upper and lower guides are 3 bearing instead of blocks. Unusual at this price. Dust collection is fantastic. When used with a 4" dust collector, dust collection in the lower cabinet is nearly 100%. Very little dust remains after cutting. Couple that with the 2.5" connection and dust collection over the table is more acceptable than I would expect. Assembly is really simple. You can change the blade without removing the table. CONS: There was a lot of tweaking required out of the box. I had to adjust my table trunion as the table was too far to the left and could not be set square to the blade. The procedure is not in the manual but fairly straight forward if you are familiar with how trunions work. I also had to true the lower wheel. the blade was tracking differently on the lower wheel than the top. I didn't notice this until my drive belt kept falling off. The procedure was really easy, however not in the manual. I found the instructions for this saws green clone and it worked great. Tensioning can be problematic. This saw has a tough time tensioning blades on the high end of the limit. (5/8" to 3/4") I personally would not recommend using a 3/4" wide blade on this saw as there isn't much support on the tires either. The blade guard is not true to the geometry of the blade. I don't think this can be adjusted. Significant height changes require resetting the upper guide bearings. This isn't a huge deal especially at this price point, but you'd think a rack and pinion system would be more accurate. Minimum blade width is 1/4" I'd like to be able to use a 3/16 or 1/8" blade sometimes for more intricate cuts as I find the bandsaw is much quicker than my scroll saw, but this is not a dealbreaker since I primarily use this for cutting larger curves and resawing. Overall this is a terrific saw. There are some flaws but most of them can be adjusted out. Also a lot of people complain there is no fence for this saw. Their is. This saw's green brother's fence bolts right up to the factory drilled holes and you can even buy it from Sears. Search sears.com for Item # 00921073000P Model # 13-900.
San Fernando, CA
The only concern is it has no fence, no concern I ordered a rival online, bolted on in a matter of minutes. I took 4x4 cedar for table legs and in a short time made almost perfect legs for my current table project. The saw flew through the 4x4. I would recommend the saw to the above average DIY woodworker
Spend couple of week searching and review different bandsaws and I finely decided on the craftsman 14 inch. I ordered for free store pickup and was very well pleased with the service. The saw was easily assembled and only took several minutes to fine tune it for precision cutting. This saw is a great added convenence to fine wood working and making simple cuts for quick projects.
East Petersburg, PA
I can't speak for the durability as of yet. what I can say is directions were great fit and finish was great. Saw is quiet and the supplied blade tracks well. I paid $359 on sale and I am very surprised. This saw is made by RIKON. If you look on Rikon's website you will find it to be an exact match with the 10-321 that most websites sell for $599. I used a RIKON fence and it fit great! I used an incra mitre gauge. It is now time to get some Timberwolf blades. I could not see getting any smaller of a bandsaw. I am so glad I did not get the 10 inch bandsaw that I was considering. Love it. 1 Ding for no leads from sears as to a fence that would have worked. I had to research that myself.
Saw went together fairly easily but photos in instructions were very dark. Set up was straightforward and am satisfied with my work. Have used the saw a couple times and it does a great job cutting for me.
It took about 2 hours to assemble. Then I let it set for a day. I found some pine, it cut fine. I fould some 2" Walnut and I cut a 1/8" strip with a problem. I had forgotten to tighten the belts. Less than one minute later It cut the wood fine. I also cut some 1" oak. No problem. I am very pleased with the saw and would recommend it.
So right off the bat, I was charged for the full non-sale price and then given the discount that shows on Sears.com. The problem is they still haven't refunded the excess sales tax collected! Now for the saw. They shipped it with the blade fully tensioned! So how long has that unit been stored with the blade stretching and compressing the tires in the same spot? Just not a good practice IMO. So after putting it together and starting it, found the blade wobbles fore and aft about a quarter inch and is probably due to the upper wheel having too much axial runout. I also put it into low speed and found the same issue as another reviewer.....the tensioner pulley doesn't line up with the belt properly. I'm not looking forward to a wobbly, single speed saw, so let's hope customer service can help.
Decent. Nothing special. Best part was the price. The set up wasn't too hard, which was really nice. I haven't found any issues with it - but haven't asked much either.
this saw is excellent to work with have a little trouble with blade belts bought new belts or bands that fits a rikon 14 in band saw and used a rikon fence blade track better after I changed wheel bands and tension spring the one that comes with the saw is to weak with a few modifacatons this is a saw for every one to use at the price I have seen on other brands this is the band saw that I use every day in my shop
- Extra 5% off OR 0% interest for 12 Months on Tool purchases over $299 Offer ends 26-Apr-2014 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Get this Tool Item at a limited time Hot Price! Sold By Sears Offer ends 03-May-2014 See details.