Craftsman 140cc* Briggs & Stratton Engine, Low Wheel Side Discharge Push Mower 50 StatesItem# 07137000000 | Model# 37000
|Dimensions and Capacity:|
|Fuel Capacity (gal.):||0.2|
|Overall Dimensions:||34.87 x 24 x 17.75|
|Color and Styling:|
|General Warranty:||2 Year|
|Materials & Finishes:|
|Cutting Deck Material:||Steel|
|Included with Item:|
|Engine Oil Included:||Yes|
|Item Weight (lbs.):||61|
|Package Contents:||Lawn Mower|
|Handles Fold For Easy Storage:||Yes|
|Number of Handle Height Positions:||1 Fixed Position|
|Assembly Required:||Assembly Required|
|Blade Material:||Alloy Steel|
|Blade Stop Feature:||No|
|Number of Cutting Positions:||6|
|Air Filter Type:||Foam|
|Engine Brand:||Briggs & Stratton(r)|
|Engine Lubrication System:||Splash|
|Engine Series:||550e Silver Engine Series OHV|
|Engine Displacement (cc):||140|
|Has Remote Choke:||No|
|Maximum Torque (ft-lb):||5.5|
|Recommended Oil & Capacity:||SAE 30|
|Spark Plug Part Number:||33430|
|Starter Type:||Pull Start|
|Wheels & Tires:|
|Front Tire Size:||7 in.|
|Front Wheel Type:||Fixed Forward|
|High Rear Wheels:||No|
|Rear Tire Size:||8 in.|
|Cutting Deck Type:||Dome|
|Cutting Height Adjustment Type:||Dual lever|
|Cutting Height Range:||1.25 to 3.75 in.|
|Cutting Width (In.):||21|
|Disposal by Bagging:||No|
|Disposal by Rear Discharge:||No|
|Disposal by Side Discharge:||Yes - installed|
|EZ Bagging Access:||No|
Ratings & Reviews
Be the envy of the neighborhood with this Craftsman Push Lawn Mower
The Craftsman 140cc Low Wheel Push Mower Side Discharge is one of Craftsman's most efficient mowers. Powered by a Briggs & Stratton® Silver Engine Series 140cc* OHV engine (5.5 ft.-lbs. gross torque), it delivers dependable starting performance, durability and an extra long life. Smooth Start delivers easy-to-pull consistency and surefire starting - includes exclusive MRS spark plug.
Equipped with the Craftsman Push Lawn Mower means you enjoy a large, 21 inch 2-in-1 domed deck with side discharge or mulch capabilities to put nutrients back into your lawn. The specialized deck design extends beyond the wheels for more precise trimming and edging. Plus, you'll save time with dual-point deck-height adjusters with six versatile positions. This mower has flexible cutting height positions ranging from 1-1/4 in. to 3-3/4 in. to cover most lawns or grass types. Low 8 inch rear wheels and 7 inch front wheels provide exceptional maneuverability over terrain. The mulch plug is built into the deck to recycle clippings and encourage a healthier lawn.
- Enjoy durability and dependability with the Craftsman 140cc Low Wheel Push Mower Side Discharge
- 21-in. 2-in-1 domed deck for high-performance discharge and mulching
- Powered by a Briggs & Stratton® Silver Engine Series 140cc OHV engine with 5.5 ft.-lbs. of torque for dependable starting performance, durability and a long life. Smooth Start delivers easy-to-pull consistency and surefire starting
- Includes side discharge chute for convenience
- Unit comes fully assembled without tools for no-hassle assembly
- Full two-year warranty protects your investment
- Available in 50 states
*As rated by the engine manufacturer
Added on November 04, 2011
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
I LOVE this mower. This has been my summer of lawnmower heartbreak. My old mower doesn't work, and is probably fixable, but I don't have the time for that. Meanwhile, the grass continues to grow and needs mowing. I want to trust the experts who sell these things because they have knowledge I don't have about features and benefits of the various machines, as well as what would work best on my terrain (hill front and back, sideyards are flat strips on both sides). I was first talked into a high-end self-propelled mower. I liked NOTHING about that mower. Self-propelled mowers WON'T move backwards, so there is no mowing back over a small area that seemed to be missed, or maneuvering in and out of tight spaces. The mower was so heavy it pulled me down the hill sideways (scary). Rear wheel drive self-propelled machines tend to spin like a car stuck in a snow drift (I found that out AFTER purchase), so I had ruts all over the yard. After the spinning, I had to push hard to get it to start to move in a forward motion. So much for the ease of self-propelled. Turned out to be more of a detriment than a benefit. I couldn't bear the thought of mowing, so that mower had to go back. Next, the high rear wheel machine. Definitely not as maneuverable as my old machine, but basically okay. Then a home improvement store cheapie that was well reviewed. That mower was lightweight and easy to use, but would cut no lower than 4", and left a 3" wide swath along the curb and along the concrete mowing strip. Both areas had to be trimmed by hand. Way too much hand work, and who wants to mow twice a week to keep up with the long grass?
Getting desperate for a simple mower that would work, I turned to Sears. Finding a plain old-fashioned mower that is NOT self-propelled and doesn't have specialty wheels is not easy. Of the few available, this one seemed like the best. The mower box was easily loaded into my mini-van, and easily unloaded by me, a 5'8" 56 year old woman about 145 lb. The salesman showed me what I would need to do to set up the handle. I added oil according to the instructions, and poured in the gas. Set up time took no more than a few minutes. Because of my last experience with the 4" tall grass on the lowest mower setting, I set these mower wheels to the lowest possible setting. The mower started easily with one pull. Started to mow, and WOW! This machine actually cuts grass. It was clear that the lowest setting was going to scalp the yard, so I easily adjusted the wheels to a higher setting.
I typically mow and then cross-cut each time I cut the grass. Not necessary with this mower. It cuts a nice clean swath the first time around. The mower deck DOES extend beyond the width of the wheels, as detailed in the product description. - The curb and concrete mowing strips were cut clean and beautifully; no hand edging needed.
This mower is easy to start, easy to use, easy to push uphill, easy to maneuver around obstacles, has easily adjusted wheel height, is lightweight, and sturdy. I especially like the fabulously designed "flow through" wheels that are easily sprayed clean of grass and dirt from both sides.
I am very glad to have found this mower. Based on my previous three disasters, I was beginning to despair of finding a simple lawnmower like they used to make, and was wondering if it was just me. I was expecting to soon see my picture with a line through it in the yard machine departments of the big box stores. I don't have to dread mowing anymore.
Rapid River, MI
Easy assembly, easy start. Adjustable wheels for different mowing levels. Overall I would recommend this to anyone who needs a mower for a smaller yard/area.
Saint Petersburg, FL
I chose to purchase the Craftsman mower after having purchased more than one of the cheap discount store mowers that seem to last on average of three years. My parents have used Craftsman mowers for years and have had success with them. I was very impressed with this mower the first time that I used it.
Baton Rouge, LA
San Antonio, TX
I do not have long arms and I'm only 5' 4" tall so this mower is my favorite ever because I can actually walk this mower without stressing out my shoulders. This is a BIG thing. The low wheel makes is an easy walk. I liked the cut too. Not too wide not too skinny and cuts evenly. Very little adjustment to get it up and where I want it. Great for single ladies walking the yard. I'm not sure on the affiliated ? - affiliated as in I've used the product and am happy, then yes.
The reviewer indicated they are affiliated with this product.
The unique carburetor on this mower mas a small plastic fuel metering device that clogs up over a relatively small amount of use and prevents the mower from running. About once a year I have to disassemble the carb and clean out the obstructions using compressed air. It's not very difficult or time consuming, but I recommend looking elsewhere.