Specifications & Dimensions
|Depth Of Cut Range:||0 to 5/8 in.|
|Fence Type:||Fully adjustable|
|General Warranty:||1 year repair|
|Item Weight (lbs.):||6.31 lbs.|
|Handle Type:||Front/Rear 1-way Contoured|
|Number of Handles:||3|
|Cord Length (ft.):||10 ft.|
|Cord Management:||Cord clip|
|Guides & Instructions:|
|Cutters & Shapers:|
|Cutter Blade Length:||4 in.|
|Adjustable Cutting Depth:||Yes|
|Depth Adjustment Control:||Knob|
|Fence Tilt:||0 to 135 deg.|
|Housing Material:||Polycarbonate (PC)|
|Warranty Detail Link:||craftsman warranty|
|Package Contents:||Dust Bag|
Ratings & Reviews
Powerful 6.0 amp motor and 10,000 RPM (no load) speed for fast, clean cuts. Trigger switch, contoured rear handle and a front assist handle. Adjustable front fence with rack and pinion for accurate depth adjustment and bevel scales. Non-slip vertical fence. 3 position depth of cut setting with micro-fine adjustment. For #0, # 10 & #20 biscuits. Includes 10 ft. cord with cord clip.
- Chip collection reduces clean-up (removable dust bag)
- Helical gearing provides smooth power transfer to cutter
- Non-slip vertical fence provides positive contact with work surface and prevents slippage
- Available for Gift Wrap
Added on February 16, 2009
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
Sturgeon Bay, WI
Old Chatham, NY
Clarks Summit, PA
I bought this based on Sears reputation for affordable tools that work well. I was not dissapointed with this joiner. While it is not a "top of the line" tool it works well and seems well built for light to moderate use. I've used it to join boards for a table top and a few cabinet doors. Easy to use and does the job.
The bisquit cutter seems to work as it should and at a reasonable price. I bought the Sears bisquit joints at the same time. I'm not sure if the cutter is making wide cuts or the bisquits are undersized, but the joints are very loose when fitting together. You have to be sure that there is adequate clamping in all directions since the bisquits do nothing for the alignment of the joints. The finished joints seem to be fine as long as the clamping was good.
i bout this on line. i use it all the time i just finshed making a new entertament center, it is easy to use and it makes a good and acurate cuts. keep up the good work craftsman.
i bought this biscuit jointer not knowing what to expect. i have been pleasantly surprised how quickly and precisely it cuts. i've been mainly butting-up hard maple boards - handles it like a champ. the dust bag does seem to fill quickly, so maybe it count include a larger one. that aside, it's definitely worth the money - terrific value.
The Craftsman 17539 Biscuit Joiner was the latest purchase that I made to add to my wood working tool arsonal. I have never used a biscuit joiner before and after going over the owner's manual and taking my new toy out to the shop and playing with some scrap wood to tes out my new tool, it didn't take long to get the hang of using it. I know there are higher end biscuit joiners out there, but this one fit my needs and was pretty easy to operate for a green wood worker. This biscuit joiner sports a 6 amp motor with a no load speed of 10,000 RPMs. The joiner will cut slots to accept biscuit sizes of #0, #10, #20 and will cut angles from 0 degrees up to 135 degrees You can cut Butt, Miter, T-Joints, Flat Miter, Bevel, Edge Miter, Edge to face, Edge to Edge, Offset Butt Joints using this biscuit joiner. The biscuit joiner has a 1 1/4" connection to connect your shop vac to for dust collection The dust bag is easy to attatch and just as easy to dump the sawdust out when full. The biscuit joiner has a 10 ft power cord to allow ample work space from the power source. The plug is polorized for safety. The biscuit joiner has a non-marring fence and the unit is double insulated and has a 2- hand grip. My immediate plans for the biscuit joiner is to make some doors with colored plexiglass panels for a hobby room and I will be using it to help make some furniture and some picture frames. The biscuit joiner comes with a plastic blow mold case that protects the biscuit joiner when not being used and it comes with 20 each of #10 biscuits. There is a nice little storage slot that clips shut to hold some of your biscuits. I would have to say that this was worth the money and if you are in the market for a biscuit joiner, I would recommend this one.
- Qualifying Orders $59 + SHIP FREE Offer ends 10-Jul-2013 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends 31-Dec-2013 See details.
- Online Only! Extra 10% off select tools Sold by Sears. Valid thru 5/25/13. Offer ends 25-May-2013 See details.