Specifications & Dimensions
|Dimensions and Capacity:|
|Overall Dimensions:||18 x 1.25 x 1 in.|
|General Warranty:||Full Unlimited Warranty|
|Item Weight (lbs.):||1.1|
|Materials & Finish:|
|Case Material:||Aluminum Rail|
Ratings & Reviews
Craftsman 3/8" Drive Socket Rack Keeps It In Line
Because no one likes the sound of loose sockets rolling around in the drawer, there's the Craftsman 3/8" Drive Socket Rack This Craftsman 3/8" Drive Socket Rack holds up to 14 sockets. It offers convenient storage and organization for all major brands of sockets
The 3/8" Drive Socket Rack makes it easy to bring your sockets along for a job or as stationary storage.
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
Los Angeles, CA
These socket rails are expensive compared to other simpler rails, but they are worth it. Sockets are held in securely with just a twist, and the magnetic base is wide enough to prevent the rail from tipping over.
Mount Morris, MI
I am currently working buy enough Craftsman Magnetic Socket Racks for all my sockets and accessories. I started out buy 9 Racks to accommodate all my quarter inch (1/4") sockets and their accessories. The sockets twist lock on to the rail reading face out for easy identification. After locking all the sockets in place I tested the magnetic strength of the rail wondering if the weight of the sockets would topple them over. I then opened and closed the drawer of my Craftsman tool chest repeatedly with some aggression. The Rack or Rail did not move and by putting the other eight Racks next to each other it only seemed to strengthen this system. I used the same procedure on the 3/8" and 1/2" models thinking that the bigger heavier sockets would have a negative effect. I am pleased to say they also passed the test. I am currently working oncompleting purchasing enough 3/8" and 1/2" Craftsman Socket Racks for all my sockets and their accessories.
They hold the sockets pretty well if you make sure the hole in the socket lines up with the pin on the rack otherwise they may not hold. The magnetic base is a plus although with a full rack of impact sockets sticking to the side of toolbox it's a little on the week side.
Great rail to put in my tool bag , sockets stand up right and be removed with just a twist. also can be taken out of bag and with magnetic base stuck to any metal surface.
Love this product, very innovative! Has a magnetic base to stay put in my tool box drawer, and locks when sockets are stored! I have 5 or 6 of these, will be purchasing two more!!!!!!
They're nice to look at, but they are going back today. I bought four; 2 of the 3/8" and 2 of the 1/2". I also wanted the 1/4", but they didn't have any (none for over a month). It's a good idea to have the locking feature, but the socket is smooth, and you can't get a good enough grip to get it to lock....and that's with clean, dry hands. Can't imagine the frustration if your hands are greasy! I sprayed a little silicone in the mechanism, but still couldn't get past the little detent. I thought about taking them all apart and hand-working each one, but for $20 each, they should have done that at the factory. Maybe they should include a pair of vice-grips with each rack....
Punta Gorda, FL
They work well , but why would they sell it missing enough socket holders to properly fill the rack except to squeeze more money out of you for the additional holders . When full you still have enough room to select each individual socket easily .
Round Rock, TX
I love a drawer with organized tools in them. This product worked very well. I love that there is a magnetic strip on the underside of this socket rack and that the sockets stay in place when you open a drawer because of that. I also like that the nubs can rotate and lock in a socket and that the nub positions can slide and are thus adjustable. You could also place these on the side of a tool box or a metal wall rack above a bench because of the magnet. My only gripes are minor -- (1) the 1/4 inch socket rack was not the same length as the 3/8 and the 1/2 (for consistency sake) and (2) the 3/8" and 1/2" socket racks were about 1" too long for my Lista tool box to fit front to back. I realize these are typically made for Craftsman tool boxes though and they were easy to cut with a hacksaw. I ended up manipulating things with ease. I bought two of these 1/4" strips and removed all of the nubs by simply removing a screw in the end cap. I had more 1/4" sockets than anything else so I moved some 1/4" nubs to the longer strips (3/8" unit) and replaced those 3/8" nubs on the shorter strip. It is very flexible to meet you individual needs that way.
North Hollywood, CA
- Members Get 10% back in points on first $500 of each qualifying purchase with a Sears Card. Offer ends 25-Dec-2014 See details.
- Free shipping! Orders $59 or more Offer ends 31-Dec-2015 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends 31-Dec-2014 See details.
- Get Quarter ct tw Diamond Earrings for $24.99 with a purchase of $19.99 or more! Limit 1 per order Offer ends 27-Dec-2014 See details.
- Need it by December 24. Offer ends 24-Dec-2014 See details.