Specifications & Dimensions
|General Warranty:||1 year full warranty|
|Item Weight (lbs.):||20|
|Lift & Jack Type:||Jack stands|
|Maximum Height (in.):||21|
|Minimum Height (in.):||13.44|
|Quantity in Set:||2|
|Lift Capacity:||3 ton|
|Wheels & Tires:|
|Wheels or Casters:||No|
|Materials & Finish:|
Ratings & Reviews
Choose Safety and Peace of Mind with this Pair of 3 Ton High Lift Jack Stands
Keep safe while working under your car by choosing the Craftsman Professional Jack Stands as a part of your set of garage tools. This set of two hi-lift jack stands has a supporting range from 13-7/16 inches to 21 inches to give you maximum lift. The ratchet design helps you by providing fast, easy, and secure adjustments to raise the vehicle in a smooth, upward movement.
Use these 3 Ton High Lift Jack Stands along with your floor jack for fully support the vehicle just in case the floor jack shifts. A wide stance with welded steel construction means added stability and a baked enamel finish resists corrosion making this stand a durable choice.
- Bring home performance and reliability with these Craftsman Professional Jack Stands
- Made of stamped steel, its welded construction makes it secure and long lasting
- Weighing 20 lbs., the wide stand construction assures stability
- Some assembly may be required
- One year limited warranty from Craftsman
- Available for Gift Wrap
Added on May 13, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
The first pair of these I had were black and yellow, so the "Pink color problem" didn't bother me. These work very well for what they are designed to do, and that is support a load (car,truck, bed frame?) on a hard surface. They have worked so well that I got another pair so I could support all four corners of a sports car at the same time. When on a level surface they provide an adequate anchor and I have never had one try to tip over. Adjusting the height is reasonably simple, and when the height is set correctly the locking handle is forced against the ratched bar so the added weight of a vehicle helps to lock it. Once the weight is removed they are very easy to unlock and colapse.
As mine sit outside most of the time a red one would fade to pink eventually anyway. I like them and would buy them even if they were completely pink.
I lost confidence in these the moment I examined them at home, and could've saved myself the return trip by doing it in the store.
How jack stands should work: Raising the ratchet release lever should require the upper piece (a.k.a. the saddle, pinkish red piece, telescoping part) to rise a bit before it can disengage and collapse. This means when the weight of the car is on it, that release lever's not going anywhere- you'd effectively have to lift half the car with your hand.
Testing these, the saddle didn't have to budge vertically when raising the release lever in order to disengage. I was able to put most of my weight on the saddle and still lift that release lever with no effort, at which point the stand would collapse. The slightest lateral shift of the lift arm is all it took. If there was a rise required, it was imperceptible, and because I hate returning purchases I sat there for a bit doing my darndest to percieve such a rise, convince myself these were functional jack stands.
For safety, those levers need to not work, period, when a car's on them. You shouldn't be able to make your jack stand collapse with freakish bad luck. A neighbor kid shouldn't be able to walk up and drop your car on you with a tug on a lever. I suggest that those of you with a set examine yours.
It pales next to the above, but having flat bases underneath the feet for a little more surface area would be nice; had I kept these they likely would have embedded themselves deeply in my cheaply paved driveway. Also I could care less about the "lift arms" being pinkish (they were), but the fact that this paint was crumbling to dust the second they touched the base didn't bode well for quality either.
Used these to change my brakes/rotors on my G6. Worked perfectly. The compact base made it easy to position next to my jack all on the same lifting point on the frame.
High Bridge, NJ
Oak Creek, WI
These stands are easy to adjust, just pull up on the red part and it's at the height you need. Just try not to bump the handle, it makes me nervous. I use a zip-tie to make sure I don't accidentally release the stand and drop the car on myself.
These are nice for the price. Being high-lift, these jack stands will allow for the clearance needed to work on a truck with big tires as well as a standard size car. They are made solid and have wide bases. Would recommend.
This is a pair of quality professional grade stands. I appreciate the safety tab feature. It keeps the everything together keeping the tops from sliding and falling on you feet when transporting. Used them to change the front shocks on a 4x4 Toyota T100 SR5. No sweat!
These stands are just as advertised. They are well-built and do just the job that they need to do. Yet they are not too heavy to easily move get out and put away.
New Castle, DE
La Vergne, TN
"Made in China"... What else can you say? I do like the "feet" on the base frame- less chance of these sinking into asphalt like my other jack stands. I also like the deep saddles- now I can actually use jack stands with uni-body vehicles at the recommended lift points without worrying about the body flange being crushed. I do NOT like fact that jack stands are now rated per pair- my old Sears jack stands are rated 2 1/4 ton EACH, whereas these are rated 3 ton PER PAIR. But, these should work better for my truck, as they are about 2 1/2 inches higher than my old set. Regardless of the quality, usefulness, or appearance, I am still not happy that Sears is putting the Craftsman name on non-USA made products. For that reason alone, I could never give a 5-star rating, nor could I ever "recommend to a friend". But, then again, they already got my money, so...
- Free shipping! Orders $59 or more Offer ends 31-Dec-2015 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends 31-Dec-2014 See details.
- Get Quarter ct tw Diamond Earrings for $24.99 with a purchase of $19.99 or more! Limit 1 per order Offer ends 31-Dec-2014 See details.