Specifications & Dimensions
|General Warranty:||1 year|
|Pad Size:||3 x 21 in.|
|Included with Item:|
|Dust Bag Included:||Yes|
|Guides & Instructions:|
|Item Weight (lbs.):||8.94|
Ratings & Reviews
3 x 21 in. Belt Sander Powers Through Tough Jobs
Smoothing things over in real life is rarely simple, but this Craftsman 8 Amp Belt Sander obliterates obstacles with ease in all realms project-related. Whether you're a handyman by trade or simply a hobbyist, this single-speed sander puts the power in your hands with 1300 fpm and a 3 x 21 in. belt that levels the playing field-and pretty much everything else in its path-again and again. Dust bag and sandpaper are included with this powerful Craftsman sander, so you'll have everything you need to get started on that pressing client project or DIY home improvement.
This 3 x 21 in. Belt Sander includes plenty of features designed to help you get the job done in safety and convenience, including flush sanding on one side and lever belt release for easy belt changes. The on-off trigger with lock-on puts you in total control, while an eight-foot cord with cord clip gives you a long leash to work with.
- This Craftsman 8 Amp Belt Sander puts all the power in your hands with its eight-amp motor/engine
- Single-speed capacity delivers 1300 fpm for all the smoothing power your next job requires
- Lever belt release for easy belt changes
- Flush sanding on one side
- Trigger with lock-on gives you more control
- Eight-foot cord with cord clip adds convenience and gives you room to roam
- Includes dust bag and sandpaper
- Product weight: 8.94 lbs.
- Belt size: 3 x 21 in.
- Available for Gift Wrap
Added on July 26, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
O Fallon, MO
Saint Louis, MO
This belt sander has plenty of power for most jobs, both heavy and light duty, and it's plenty easy to operate and configure, but just like a lot of the other reviewers noted, the belt tracking system is bad and the dust collection system is even worse. The belts constantly drift in and out on the rollers because the spring loaded adjustment mechanism never stays locked in, causing uneven sanding and/or belt destruction, and the dust collector really only collects about 4% of the dust created. For a 1 or 2 time use, maybe for light duty only, this belt sander is probably OK. For anything more than that...I'd use a different belt sander (I still use mine fairly regularly, but having to adjust it literally every couple minutes aggravates me to no end).
Kansas City, KS
My brother is the carpenter of the family and he found the tool to meet his requirements to get the job done. I always lived by the creed "Right tool for the right job." This tool meets the standard.
Bought this to replace a 3X21 belt sander I bought 35yrs ago that was a JC penny brand. That JC penny sander worked great with all the power I needed was all metal and was lighter then this new one but the Transmission finally gave up sad to see it go. This one works great so far I have only used it a few times but am just starting to sand all the wood work in my great room including the stair railings. Have had no problem with tracking as others have stated just wish it was lighter.
High Falls, NY
Belt does not track well. After making the proper adjustment to align the moving belt as I start to sand, the belt drifts way off to the inside, where it gets shredded by the adjustment screw spring anchor or at least 1/2 in. outside the sander. This spring adjustment design has too much play to maintain any set adjustment. I will be returning it
Moreno Valley, CA
It had been a while since I used this & I had a big job to do. My first belt shredded and I could not find the manual anywhere so I went on-line & read about the tracking adjuster. Once armed with this information it was a quick turn of the adjuster & I had no more problems with shredding. It made a tough job easy and got the job done!
Like the speed at which it sands, but belt tracking is spring loaded and doesn't hold true. would recommend if you could clean out dust intake
I am in the process of removing a 60 year accumulation of exterior paint from an old building. During the previous re-paints, it had never been properly prepped and was a real mess. About 2000 sq ft of wood siding (105) and trim. Pressure washing, scraping and sanding seemed to be the course to take. I started with a $25 dollar sander from **************, but the wear plate, wore out and I couldn't get a replacement. Next up was what I thought was a very well made Porter Cable 352VS. It lasted a little over an hour before the plastic fan self destructed. I've always had good luck with Craftsman tools, they aren't top of the line but they get the job done for me, so I gandered a look at this Craftsman/Ryobi EBS9576VFHG model as I didn't want anything too large for the type of work I'm doing. First off, the weight listed on this page is wrong. According to the manual, which I can't find at the moment, the weight is about 10.5 lbs, if that is a concern to you. Powerwise, I'd say it keeps up with the Porter Cable with no problem. Using a heavy 36 grit belt, I've yet to bog it down. Balance could be a bit better for fine woodworking, but for what I'm doing, I don't care. It seems to do a decent job of dust collecting. I did mange to clog it up once when a large chip of latex paint was sucked up inside of it, but that wasn't the tools fault and removal of the side cover cleared it out. I blow it out with compressed air at the end of each day and it is holding up well so far. I did start to wear through the wear plate, but thanks to Sears Parts Direct, had a new one in about a week. My one and only complaint is with the belt tracking. They have a weird design for this mechanism. It involves a spring attached between the adjustment **** you see on the top of the housing and the roller. That spring allows an up and down movement of the roller if too much pressure is applied to the front roller. That is why the manual has a warning against doing this as it will throw the tracking off. Working horizontally or on a bench top, this would probably not be a problem, but it you are having to work in odd positions it might. If they would use a solid bolt rather than a spring, the way they've done on the 4" Craftsman Pro model, it would help to eliminate this. Would be 5 stars if not for this one problem. Overall though, I am happy with this model so far and don't know of anything close to this for the price.
- Free shipping! Orders $59 or more Offer ends 05-Apr-2014 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends 31-Dec-2014 See details.
- Online Only! Extra 10% off select Portable Power Specialty Tools! Sold by Sears. Offer ends 15-Mar-2014 See details.