Share This Page Print

       spin_prod_732705512  spin_prod_732705212  spin_prod_732705312  spin_prod_732705412  spin_prod_732747512  spin_prod_732747712  spin_prod_732747812
      Enlarge Image

      Craftsman  3.0 Amp 1/4-In. Impact Driver

        Item#  00934483000 | Model#  ID3000
      Close

      Create a Review

       
       
       Rating 5.0 | 10 Reviews | Write a review
      $69.99
      $69.99
      I Own This Add to List
       

      Specifications & Dimensions

      Dimensions:
      Overall Dimensions: 8.5L x 2.5w x 8.5h
      Dimensions and Weight:
      Chuck Size: 1/4 in.
      Product Overview:
      Chuck Key Type: Keyless
      IPM: 3000
      Maximum Torque (in-lb): 1500
      Reversibility: Yes
      RPM: 3200
      Variable Speed: Yes
      Included with Item:
      Bits Included: Yes
      Case Included: Yes
      Cord:
      Cord Length (ft.): 6
      Package Includes:
      Package Contents: Impact Driver, 2" #2 Phillips Powergroove Bit, 2" 3/8" Socket Adapter, and Bag

      Overview

      Ratings & Reviews

      Special

      Projects

      Product Description

      This Craftsman 1/4 In. Impact Driver Delivers Serious Torque

      A powerful tool for all your driving, cranking and loosening needs, this Craftsman 3.0 amp 1/4 in impact driver delivers up to 1,500 inch pounds of torque to nuts, bolts, screws and more. With a rotational speed of 3,200 RPM and impact speed of up to 3,000 Impacts Per Minute, this tool delivers the power to bust even rusty bolts loose. An equipped LED light illuminates engine compartments and under chassis, while the ergonomic design gives you a solid grip, your hand can count on. Easily take it on the go, with the included bag.

      Built tough and designed to deliver, this Craftsman 1/4 in impact driver features a 3 amp, corded motor that’ll never run out of batteries, and equipped with a ¼ inch hex quick coupler, it grabs nut and screw driver bits fast and tight. A solid tool that gives you the torque you need to work on the car, in the furnace room and on outside projects like decks, stock-up with this Craftsman, and get the job done right.

      • Craftsman 3.0 amp 1/4 in impact driver features a 6 foot power cord for extended reach
      • Quick grabbing hex coupler swaps between bits fast
      • Super bright LED delivers clarity to the job
      • Center handle design delivers balance and control
      • Forward and reverse button is easily accessible
      • Live tool indicator lets you know when you have power
      • 3 amp motor delivers up to 3,200 RPM
      • Hammering action of up to 3,000 IPM
      • 1,500 inch- pounds of torque gets fasteners turning
      • Includes Bag

      This product is:
      • Available for Gift Wrap

      Added on September 08, 2012

       

      Overall, others give this:

      10 Reviews Write a review
      9 Reviewers (90.0%) would recommend this to a friend.
      Overall Rating Breakdown:
      5stars
      4stars
      3stars
      (0)
      2stars
      (0)
      1stars
      (0)

      Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
      Those benefits were not conditioned on the positive or negative content of the review.

       

      Papa42

      Buda, TX

      Mar 10 , 2015
      via sears.com
      Overall
      Excellent Tool

      I used this to build a large project and it worked good. No dead batteries just lots of power. I drove some 4 inch lag bolts effortless. I will be using this a lot. Excellent tool.

      I would recommend this product to a friend.

      Helpful
      (1)
      Not Helpful
      (0)
      Flag this Review

      Worked

      Rochester, MI

      Dec 22 , 2014
      via sears.com
      Overall
      Great Value

      I bought this on sale to use next summer for some deck repair work. I haven't tried the driver yet, but it feels very sturdy and heavy, which I guess is good. I read a lot of reviews and compared different drivers. I think this is a really good one for the price especially. And, you can't beat Craftsman quality!

      I would recommend this product to a friend.

      Helpful
      (1)
      Not Helpful
      (3)
      Flag this Review

      Acts1336

      Broken Arrow, OK

      Sep 12 , 2014
      via sears.com
      Overall
      Great Impact Driver

      I buy most of my tools with AC power instead of batteries. This driver is heavier than most of the newer battery-operated impact drivers, but it's also a pretty powerful tool. I remodeled a room in an attic and needed this driver to drive 6" screws into seasoned rafters, which are hard as rock. This driver was able to drive them when nothing else would. It could break off the screw heads (good American-made screws-not the imported cheap stuff), so it's got enough power to handle just about any job I need it for. Very happy with this tool.

      I would recommend this product to a friend.

      Helpful
      (4)
      Not Helpful
      (0)
      Flag this Review

      jurban6

      Linthicum Heights, MD

      Mar 27 , 2014
      Overall
      Good alternative to Cordless

      So I recently bought this item because I am tired of paying $100 a pop for new cordless tool batteries, when I only really use them in my wood working shop. The cost of this tool is well worth it. It costs less than one battery for my Makita. It is very strong, and quick. The grip is nice, but the tool is not as well balanced as I would like, it is a little front heavy. For most this will not matter, but for a tradesman it makes a difference. It is also significantly heavier than my Makita, not a bad thing as the materials are probably stronger, only time will tell. Very satisfied.

      I would recommend this product to a friend.

      Helpful
      (7)
      Not Helpful
      (0)
      Flag this Review

      New_Radar_Fan

      Cortland, OH

      Mar 22 , 2014
      via sears.com
      Overall
      No more stripped screw heads

      This drill is awesome!! No more stripped screw heads even while using it one handed!! That plus never having to buy a replacement battery a few years down the road that would cost as much as this drill does alone makes it worth the money. I have yet to try it on my car or SUV's lug nuts but I also have the 8 amp impact to rely on for those bigger jobs. This driver will be key for my upcoming swingset/deck/shed projects. After pairing this with a 25 ft cord reel my 18V DeWalt drill will be collecting dust!

      I would recommend this product to a friend.

      Helpful
      (3)
      Not Helpful
      (0)
      Flag this Review

      VSK_COP

      Coppell, TX

      Jan 22 , 2014
      via sears.com
      Overall
      This impact driver rocks!!!!

      Bought this CORDED impact driver today for using around the house and building medium sized furniture. Used on 3" screws philip and robertson heads, and the driver worked flawless. Next on the list of hex heads and i have no doubt it will work just as fine. I do not own any cordless tools except a 3.6V screw driver. I love corded tools and keep 100ft of 16 and 14 guage extension cords handy incase it need to work outside. Highly recommend this tools to anyone considering it.

      I would recommend this product to a friend.

      Helpful
      (1)
      Not Helpful
      (1)
      Flag this Review

      1967elcamino

      Sacramento, CA

      Dec 15 , 2013
      via sears.com
      Overall
      Tool is excellent

      I would recommend this product to a friend.

      Helpful
      (0)
      Not Helpful
      (2)
      Flag this Review

      jasmac

      Auburn, WA

      Feb 27 , 2013
      via sears.com
      Overall
      Impressed and plenty of power

      I bought this to drive screws through cement board for a tile floor remodel. Sometimes you need the max power and usefullness of a corded tool. This impact driver worked well all day long. I have a cordless impact as well and I prefer this one for my tougher jobs when I know I will need it all day long. No batteries to wear out or die. Would recommend for the home shop.

      I would recommend this product to a friend.

      Helpful
      (19)
      Not Helpful
      (0)
      Flag this Review

      644mrfixit9649

      East Chicago, IN

      Jan 11 , 2013
      Overall
      well worth the price

      awesome it is going to be my next purchase

      I would recommend this product to a friend.

      Helpful
      (0)
      Not Helpful
      (18)
      Flag this Review

      HAI333

      San Jose, CA

      Dec 3 , 2012
      via sears.com
      Overall
      Amazing power

      This is an excellent tool. I tried this driver on a few 3in. screws and it was effortless. It only takes about 1 sec for each 3in. screw to sink all the way into douglas fir. The quick release on this driver is well designed and functions very smoothly.


      Helpful
      (14)
      Not Helpful
      (0)
      Flag this Review
      • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2015 See details.
      • Free shipping! Orders $59 or more Offer ends   31-Dec-2015 See details.
      • Get Quarter ct tw Diamond Earrings for $24.99 with any storewide purchase of $19.99 or more! Offer ends   31-May-2015 See details.

      close x