Craftsman 5 pc. Screw Extractor Set - Includes Screw Extractors No. 1-5
Sears Exclusive. | Item# 00966202000 | Model# 66202Specifications & Dimensions
| Product Overview: | |
|---|---|
| Product Type: | Screw-out sets |
| Quantity in Set: | 5 pc. |
| Units Type: | SAE |
| Warranties & Coverage: | |
| Warranty Detail Link: | craftsman warranty |
Overview
Ratings & Reviews
Special
Projects
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
Lawrenceburg, IN
My motorcycle rotor bolt was stripped so I went to the local hardware store to get some extractors. I had used this type of extractor before (of way better quality) and have had great success. As soon as I drilled a hole deep enough I hammered bit No. 3 snug in the hole. As I started to twist counter clockwise I could feel success as the bit tightened. Not a second later the bit snapped off in the hole. Needless to say I'm really pissed because I now have a much more complex project than I wanted.
batkdz
Cadiz, KY
via sears.com
great
nancymorrell
Tucson, AZ
via sears.com
Boy, when you need these they are great. The screws that you need them for are always the hardest to get to but these will do the job.
Black Diamond, WA
via sears.com
used the #4 extractor to take out a broken bolt. Worked fine. Would like to see the drill bit sizes stamped on the extractors.
Harrisburg, PA
via sears.com
Snapped the next to large one with less than 25 lbs of torque.
andkorn
, Connecticut
via sears.com
I have a very small but annoying bolt stuck. I successfully drilled a 5/64 inch hole in the bolt (not easy!). Inserted the #1 screw extractor and applied slow constant force. The extractor reached the end of the hole and stopped. I applied the same amount of force again and the extractor snapped like a toothpick, leaving me stranded. Now I need to drill out the entire thing and hope I can re-thread. If you look closely at the product you can see that it is not made of the same high-strength metal as drill bits are. I can see this product working on a low-torque job, but most of the time if a bolt has snapped that means it is seized and needs lots of torque. I am eyeing the Schroeder HI-TRAC 5-pc. Fine Thread Screw Extractor Set, but it is too large for my needs.
GoldenP51
, Unknown
via sears.com
I had a torx bolt stripped and stuck in my jeep. Drilled the pilot hole and used the largest bit in this set and it got it out with no problem. Very strong and sturdy bits, surprised at how easy and well these worked.
mr2man
, Unknown
via sears.com
Just as what happened to the other guy. I drilled it out, and put in the extractor and it snapped off flush. Don't waste your money on these.
Haycocks
, Thousand Oaks Ca
via sears.com
A small job on an old motorcycle became much bigger - I had successfully drilled a pilot hole in the stud that had conveniently broken off at the surface, I gently put in the Craftman scew extractor, applied slight force and - the extractor also broke flush with the surface - were there supernatural forces at work, or was I just unlucky, to have a bad batch of extractors - I will never know! Now I am saving for a drill bush and a die drill to remove the hard extractor from the softer stud! This story is not representative of all Craftsman tools, I have found them to be generally good quality before this unfortunate episode!
- Qualifying Orders $59 + SHIP FREE Offer ends 10-Jul-2013 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends 31-Dec-2013 See details.
- Online Only! Extra 10% off select tools Sold by Sears. Valid thru 5/25/13. Offer ends 25-May-2013 See details.
