Specifications & Dimensions
|Product Type:||Screw-out sets|
|Quantity in Set:||5 pc.|
|Units Type:||SAE and Metric|
Ratings & Reviews
Get That Stubborn Screw Out with this Craftsman Screw Extractor Set
The stubborn fastener has raised the blood pressure of millions, but you don't need to worry if you have the Craftsman 5-pc screw extractor set . This Craftsman extractor set is the ideal way to extract things like stuck screws and bolts with ease. It doesn't expand the material while it's working. It's an especially great choice for use with softer materials or thin-walled pieces.
This five-piece Craftsman screw extractor set from Sears includes five different sizes of extractors, which means you'll have plenty of options to find the absolute perfect fit the next time you're in need. The screw-out set works with both SAE and metric units, for added versatility. Use this set, remove it, and move on.
- This Craftsman 5-pc screw extractor set is an easy and efficient way to remove stuck materials like screws and bolts
- The five-piece set offers five different-sized extractors for versatility
- Great for extracting stuck materials without expanding the material while it's being removed
- Works with both SAE and Metric units
- From the trusted quality of the Craftsman brand
- Available for Gift Wrap
Added on May 13, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
I had a 2001 ExplorerLImited with the V-8. Due to road salt, I broke off the spark plug in cyl #2. I was really worried I'd have to end up pulling the head. There was nothing to bite into. Got this style extractor, used some "freeze- spray" and tapped this in...nothing to lose right?
Waited one hour, tapped it again and tried to turn it. Viola! It began to back out.
Had never used this style before, but for bigger bolts, they are definitely more durable and since they have an "edge" to them, you actually drive it into the side wall of the bolt your removing so there is less slip. Highly Recommend!
Had 3 broken 3/8 axle bolts to remove. Bought these because I have used cheap ones in the past and have had problems. Had to use 3 different extractors because each one broke on the first try. I'm a certified mechanic and I know not to force these but this was ridiculous. Not to mention the nightmare of getting the bolts out with broke extractors in them. Craftsman used to stand for quality! Now they are using junk Chinese recycled steel to make their tools cheaper so replacing them isn't a burden. I have a ratchet that my father gave me 30 years ago and it still works as good as the day he gave it to me. Exchanged a 3/8 ratchet and in 3 turns the mechanism fell out! Very sad and disappointing!!!
As many stated, this tool won't extract any harden steel screws/bolts. The tool is made of extremely brittle material and will break off as soon as a moderate force is applied. The broken piece gets then stuck in the hole making it even harder to extract the broken bolt because you can't drill it out. Don't waste your time and money on this tool.
Used 2 of these and both broke first time without much pressure on them. Went to return them and was told not under the Craftsman Warranty. Waste of time and money. Like other reviewers, should have known better as soon as I seen "Made in China" The Craftsman name isn't what it used to be! Made in China tools, I can find almost anywhere at way way less money and some with lifetime replacement. Not a big Snap-On fan but definitely will explore from here on out.
You can try other brands of extractors but will they work? After a co worker of mine tried repeatedly tried to extract a stripped out hex key set screw with some cheap extractor and made the set screw even worse. My co worker went to get a drill and a tap. When he left I got my Craftsman extractors out determined the best size and wham it was out. I had the bearing off the shaft replaced with a new bearing and was picking up the rest of his cheap extractors by the time he got back with a drill and tap. A few days later I saw he had purchased a set of Craftsman extractors.
The reviewer indicated they are affiliated with this product.
Warner Robins, GA
I purchased this item to remove a broken head bolt from my Mitsubishi pickup truck. I thought... Craftsman... there is a name I can trust... That may have been so in the past... but I do not think I will ever buy Craftsman tools again. I should have known not to when they were "made in China". This thing broke on the first turn. SO now I am stuck with a head bolt that I have to call a machinist to remove. This is the second set of Craftsman screw extractors that I have had that have broken (had the micro drill set...). Save your money... get a decent set. Stay away from these things...
I think it would work fine for bolts or screws that aren't stuck too tightly, because it bites well. However, I was astounded at how easily it shattered. I was using the smallest extractor, applying about the same amount of force I would use to open a lightly stuck jar, and SNAP! The tip broke off inside the bolt shaft- with no way to pull it out! I was using it when the work area was hot to the touch- maybe this weakened it? Still, the earlier comments about toughness make me wonder if quality may have declined in recent years. Also... contrary to an earlier review it is not designed for reverse-threaded applications. The cutting edges are angled like a pinwheel so the tool bites nicely when turned counter-clockwise (lefty) and releases when turned clockwise (righty).
Do not expect this tool to extract any hardened bolt or anything set into solid metal. The tool is cast (iron, I guess), which makes it very brittle. Cast metal anything is not hardened. It is good for some applications I guess but applied torque is not among the benefits. It will break under any pressure at all. I ordered this set but knew immediately when I got it I cannot use it for the purpose I bought it for. I needed to remove stuck brake bleeder valves. I won't use this tool for that purpose: it will break off and cause me further grief. Waste of money for my purposes. Don't waste yours. And frankly, I doubt it would remove a stubborn wood screw without snapping. As for a wood screw, to use this product you will first need to drill a hole in the screw, and then tap the correct extractor tool into the hole, and then use a drill to extract the screw. Whereas you have the danger that the bit will break anyway. Oh, and be sure to wear goggles if you try that, since a small shard of metal CAN blind an eye. Bottom line, do not buy this product for any purpose. It's made of inferior material and is insufficient to almost any purpose. Trust me. Find a titanium tool that promises the same thing, if such a tool exists. I'll just give up and replace the part I was trying to fix. Cheaper in the long run.
- Free shipping! Orders $59 or more Offer ends 31-Dec-2015 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends 31-Dec-2015 See details.
- Get Diamond accent Heart Earrings for $29.99 with a purchase of $19.99 or more! Limit 1 per order Offer ends 31-Mar-2015 See details.
- Get 15% off Craftsman or DieHard work boots with online tool purchase. Offer ends 07-Mar-2015 See details.
- Get Quarter ct tw Diamond Earrings for $24.99 with any storewide purchase of $19.99 or more! Offer ends 31-Mar-2015 See details.