Specifications & Dimensions
|Color and Styling:|
|Item Type:||Wheel weights|
|Item Weight (lbs.):||55|
|Assembly Required:||Assembly Required|
|Quantity in Set:||1|
Ratings & Reviews
Use the Craftsman Wheel Weight for Tractors for a Smooth, Safe Ride
Attach these Craftsman 55 lb wheel weight to your tractor, and enjoy a smooth, safe ride. The 30-lb. weights steady your tractor on uneven and slippery winter terrain. Turning around a corner, driving through snow-laden or muddy roads will be smooth and safe with these-traction-enhancing weights. Plus, the extra weight will add stability to your tractor and prevent skidding.
The wheel weight for tractors is convenient to use, since it can be easily installed and removed. So, attach these weights to the rear wheels of your tractor, and go out and get done with your winter chores. Your ride is sure to be a comfortable one.
- These Craftsman 55 lb Wheel Weight should be bought as a pair for extra stability
- The wheel weights deliver exceptional traction, while preventing slippage for safety and a more comfortable ride
- They are black in color to match the tone of your tires
- Each wheel weight weighs 55 lbs.
- Some minimal assembly is required
Added on June 15, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
These weights are for the 12 inch wheels . They are easy to install and they are plastic covered . They do what they are suppose to do . Not any problems at all . I leave mine on year round . Works great with chains in the winter for snow removal .
I used these with chains for several years while plowing and they do the trick and are a must have if you're going to plow snow. I'm going to try these next with a front scoop and I'm sure they will work fine and I'm hoping it's enough weight to counter balance a fully loaded scoop. A slight issue I have is that they're somewhat of a hassle to get on and off. They're heavy so you have to hold them in place with one hand while reaching under the tractor with the other hand to get the bolts on. Your other option is to get some help. The other slight issue I have is that you can't add air to the tire while these are on. So if your tire is low on air in the winter you need to take these on and off in the cold.
I would gladly trade ease of installation for performance. There is a lighter-weight version of this tractor wheel weight with easy-install bolts, but they cover the valve stem and come loose over time. Their job is to be heavy! These weights are quite easy to install, if awkward to position due to their weight. I can't imagine someone who relies on their tractor to keep their driveway clear all winter, and doesn't mind blocking the valve stem. I've had tires start leaking during the season, and I didn't want to pull the wheel to have the tire repaired. As long as I inflated the tire before each use, it was fine. Removing and re-installing invites more opportunity for the part to fail somewhere. I would much rather have the weight on the wheel - that's where the traction comes from, so why attach the weight to the body, where the frame and transmission must handle the extra load? Mounting behind the tractor actualy takes load OFF the front tires, which can make it more difficult to steer (without traction, front tires can tend to slide instead of lead). These units come with only qty(2) bolts for installation. For piece of mind, I will probably buy a second set, so each weight is held to the wheel with qty(4) bolts (there are four holes on the weights, and four mating holes on each rim).
I bought these weights because they were cheaper and heavier than the other brand Sears carries. Picked them up and tried to install them. No go on my JD with 24x12x12 tires. They have a lip on them that is larger in diameter than the rim without any clearance for the tire. Probably works fine on skinny 12" tires, but not mine. Had to exchange them for the other ones. They are designed so you can stack them, and even come with the hardware for it. Nice feature!
theese wheel weigths fit the 12 inch wheel nicely , thought it was going to be hard to install but wasn't , I took the tire assembly offf drilled necessary holes then put them on and installed the wheel weights , very satisfied with them !
Elk River, MN
Needed this for traction when tilling a garden with a pull behind tiller, It worked like a dream. Excellent traction and did not foul up with dirt as it cleaned itself.
- Members Get 10% back in points on first $500 of each qualifying purchase with a Sears Card. Offer ends 25-Dec-2014 See details.
- 5% Instant Savings or Special financing on Lawn & Garden items over $299 with Sears card. Offer ends 27-Dec-2014 See details.
- Online Only! EXTRA 10% off Tractor Attachments Sold by Sears. Discount reflected in price shown. Offer ends 25-Nov-2014 See details.
- Need it by December 24. Offer ends 24-Dec-2014 See details.