Share This Page Print

 00961078000-1
Enlarge Image

Craftsman  61078 4.8-volt Cordless Rotary Tool with 5-Accessories

  Item#  00961078000 | Model#  61078
Close

Create a Review

 
 
 Rating 3.5 | 26 Reviews | Write a review
Reg Price: $34.99
Savings: $3.50
$31.49
I Own This Add to List
 

Specifications & Dimensions

Dimensions:
Height (in.): 3.56
Weight - Battery Installed (lbs): 1
Width (in.): 9.53
Dimensions and Capacity:
Length (in.): 8.02
Weight - Excluding Battery (lbs): 1
Product Overview:
Contents: Tool, Battery, Charger and 5 Accessories
General Warranty: 1 year
Type: Rotary tools
Color:
Color/Finish: Gray
Included with Item:
Battery Charger Included: Battery Charger Included
Battery Included: Battery Included
Bits Included: Yes
Case Included: No
Number of Batteries Included: 1
Wrench Included: Yes
Motor-Engine:
Speed Capability: 2 speed
Guides & Instructions:
Owner's Manual: Yes
General Features:
Charge Time (Hrs.): 3
Cutting Tool:
Spindle Lock: Yes
Battery:
Battery Type: NiCad
Battery Voltage: Specialty
Battery Voltage (V): 4.8

Overview

Ratings & Reviews

Special

Projects

Product Description

Designed for drilling, sanding, shaping, detailing and other light-duty jobs, this compact, go-anywhere, use-anytime tool comes in extremely handy in and around the house. It features two speeds and can be used with any Dremel accessory bit with up to a 1/8" shank.

  • Ideal performance for small craft projects
  • Lightweight and compact for precision and control
  • Two-speed simplicity is ideal for variety of materials

  • Convenient High/low speed switch (6500 and 13,000 rpm) to match the proper speed required
  • Shaft lock prevents shaft rotation when changing bits
  • Silicon carbide grinding stone, polishing wheel, sanding drum & band, screw mandrel
  • 4.8 volt, 4-cell removable NiCad Battery Pack
  • 3-hour charger with LED light shows proper charging
  • Rugged, high-impact resistant housing helps protect tool from damage and reduces weight
  • Ideal for precision woodworking, refinishing, model building, craft projects
  • Compact and lightweight for easier handling and less fatigue

This product is:
  • Available for Gift Wrap
This product comes with:

Added on July 26, 2010

 

Overall, others give this:

26 Reviews Write a review
16 Reviewers (62.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
(0)
2stars
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise5 found this helpful
Mr-Mac
Feb 9 , 2011
Craftsman 4.8 volt Cordless Rotary Tool Vs. Remington 1100
I recently bought a Remington 1100 LT-20 Skeet-T shotgun and it was in horrible condition! It had been in an open box in a dusty attic for better than 15 years when I finally got to it to rescue it! The previous owner had passed away and his wife asked one of her children to store it for her and he oiled it all down (quite heavily I might add) and stuck it up in her attic in an open box. Years worth of dust collected on the oil until it eventually dried out and turned into something an adobe brick. I'm talking stuff that could be used for brake lining for a semi! At any rate, I get the shotgun home and I didn't really have much in the way of polishing tools and I new I'd need something to get down into the little cracks and crevices that this gun sports. Places like where the barrel rib is attached and the threaded magazine tube cap, etc. I had all the small scrapers and toothpicks needed but I needed something to really bring out the bluing in the metal once I was done scraping. Bring on the 61078 cordless rotary tool! I completely disassembled the shotgun right down to the last nut and bolt and began the tedious process of cleaning it up. The rotary tool came in to play much sooner than I thought it would just getting a lot of that old dried oil of all the small parts it permeated through. The bolt carrier had enough of that junk to prevent it from ever operating like it should until I got after it with the rotary tool and a very fine polishing compound! Now it's as slick as greased owl snot on an ice cube! I worked my way all through the gun and then once it was finally thoroughly cleaned I started to polish the areas that still needed it and then deburred a few areas of concern around the shell carrier and the grooves inside the receiver making it all nice and smooth! I reassembled it lightly oiling it as I went and continued to polish those areas that still needed a bit and then, when I was finished took it to a gunsmith for a final checkup before I ever thought about hitting the range! Now, before I go on, I have to tell you that I did buy this shotgun sight unseen and I only paid a total of $50 ($25 for the shotgun and $25 for the transfer fee) from the son who oiled the devil out of it 15 years ago! It had been left to him when his mom passed away last year and he had no use for it. He knew what he was selling so don't blame me for making a sweet deal! The gunsmith took the 1100 in hand and went all through it making these 'Hmmm..." sounds as he went making me as nervous as a long tailed cat in a room full of rocking chairs! When he looked like he was done I asked if he thought it would be a good gun for the wife and what value it might have for insurance purposes. He asked me how I cleaned the gun since there was no warn bluing and no spots where the gun looked like it had ever had been polished and I told him what tools I used and how the rotary tool saved me on a couple of occasions. He offered to buy the gun for $850 right then and when I turned him down he told me it was easily worth that and maybe a bit more. The wife was thrilled with her new skeet gun! Thank you Craftsman!
Criticism4 found this helpful
lledlled
Oct 16 , 2013
Battery Issues
Very small, short, no power jobs is all its good for. Any pressure or power needed will put this back on the charger quickly. Spend a little more and get a bigger, corded model. The battery is the only problem with this tool but it's a big problem.
 

Wetnewf1

Port Hueneme, CA

Jun 2 , 2014
Overall
4.8v Cordless Rotary - poor battery performance

Bought about a year ago in Burlington, MA. to use as a nail trimmer on a big dog. Bought a spare battery as well in case I was working on multiple dogs. The batteries will not hold a charge overnight. If I leave them charge about 3 hours each, they are ok for about 15 minutes of work. Main battery is Craftsman, second one is Dremel. Neither hold a charge.


Helpful
(1)
Not Helpful
(0)
Flag this Review

99944559994455

Louisville, KY

May 26 , 2014
Overall
If only i could give it NO stars!!

weak, powerless. could not do anything with it! battery ran out in a few minutes. would hardly put a dent in plastic. gonna try and return, might be good tool for little children, not powerfull enough to get hurt by it!!! maybe it can cut playdough???


Helpful
(2)
Not Helpful
(0)
Flag this Review

DeAnn208

Boise, ID

Apr 30 , 2014
via sears.com
Overall
DeAnn

I love this cordless tool, it is excellent

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

FXDobler

Scottsdale, AZ

Apr 10 , 2014
via sears.com
Overall
Cordless Rotary Tool

I bought this mainly to trim my dog's toenails. The clippers normally used tend to splinter the claws and it is too easy to cut off a little too much. I had been using a Dremel with the long flexible extension, but this was somewhat cumbersome. With this rotary tool and the sanding drum , I will have much better control. It works like a charm.

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review
Apr 8 , 2014
via sears.com
Overall
THIS ONE WORKS!

This is the second one I purchased. Battery on the first one would not hold a charge.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

GJS1953

San Diego, CA

Feb 18 , 2014
Overall
Versatile - enduring

I have been using this tool periodically and it haws proven the test of time. i this site looking to replace the battery after years of service.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

emk738

Greensburg, PA

Dec 8 , 2013
via sears.com
Overall
Cordless Rotary Tool

Easy to use and very light but lacks the power of the corded version, but all in all a nice tool to have.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

lledlled

Visalia, CA

Oct 16 , 2013
Overall
Battery Issues

Very small, short, no power jobs is all its good for. Any pressure or power needed will put this back on the charger quickly. Spend a little more and get a bigger, corded model. The battery is the only problem with this tool but it's a big problem.


Helpful
(4)
Not Helpful
(0)
Flag this Review

mwburgett

Bonita, CA

Oct 13 , 2013
via sears.com
Overall
high quality tool

this is a high quality instrument that is portable and convenient to use

I would recommend this product to a friend.

The reviewer indicated they are affiliated with this product.
Helpful
(1)
Not Helpful
(0)
Flag this Review
Aug 30 , 2013
via sears.com
Overall
not much ooomp!

Battery drains quickly. I thought I had burned up the unit because blade would stop under slightest pressure when running down,


Helpful
(1)
Not Helpful
(0)
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   31-Aug-2014 See details.
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends   31-Dec-2014 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2014 See details.
  • Online Only! Extra Savings on select tools Sold by Sears! Offer ends   30-Aug-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x