Specifications & Dimensions
|Number of Sockets:||7|
|Drive Size:||1/4 in., 3/8 in.|
|Impact or Standard:||Standard|
|Marking Text Size:||Standard|
|Item Weight (lbs.):||.6|
|Pass Through Type:||No|
|Socket Size:||T15, T20, T25, T30, T40, T45, T50|
|Unit of Measure:||Metric, SAE|
|Included with Item:|
|Warranties & Coverage:|
|General Warranty:||Full lifetime|
Ratings & Reviews
7-pc Tamper-Proof Torx Bit Socket Set Works Hard, Just Like You
Tamper-proof screws, nuts and bolts were designed to lock into place, the Craftsman 7-pc tamper-proof Torx bit socket is engineered to back the security with strength. The patented new pressure fit system increases bit retention and movement in holder, which means you can work harder, smarter and longer with this Craftsman tool in your belt.
The 7-pc tamper-proof Torx bit socket features S2 steel construction, designed for working hard in the garage, jobsite and home. Ranging from T15 to T50 sizes and backed by Craftsman's lifetime warranty, it delivers solid performance while taking care of the most common Torx sizes. Add this set to your arsenal, and get the job done right with Craftsman.
- Craftsman 7-pc tamper-proof Torx bit socket uses a patented, pressure fit system for maximum retention
- Set includes T15, T20, T25, T30, T40, T45 and T50 sizes
- Crafted from high-strength S2 steel
- Easy-to-read markings resist rust and corrosion
- Easily wipes clean after use
- Designed for use in a variety of applications in the garage, around the house or at the job site
- Backed by the Craftsman Forever Guarantee
- Available for Gift Wrap
Added on July 26, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
I have loads of other Craftsman tools and never had anything as poor as these. The bit tip metal is VERY soft....not sure why, as their regular torx bits are fine. (mine bent/stripped when tightening a THREE ft/lb screw into plastic carrier for a mass-airflow sensor!! I usually associate Craftsman tools with high quality and strength; not sure what happened with these. Sounds like many have had similar results.
Like the heading states, these tools are good quality, but only if you can find old stock. I was with a friend doing some volunteer work putting playground equipment together. He had just purchased these and he was excited to use them, so we were using his tools at the time, and specifically the largest bit in this set (a T-50). To tighten everything we were using a 7? slide bar handle (Craftsman #04428) and a combination wrench. While tightening, the base of the socket split. There was a tear in the metal that was a quarter to a half inch long. When we stopped in amazement to look at the tool, we saw the problem: Made in China. Soft metal was the culprit. We went to a Sears store and found more of the same, and then went to a Sears Outlet where we found a set of these that were made in the USA. We went back to where we were volunteering, and the new sockets lasted the rest of the weekend with no problems. One thing I can say positive about the Chinese made sockets is the chrome had a better luster than the American made ones. Unfortunately, it seems as if Sears/Craftsman did nothing more than put lipstick on a pig with those things. They really were terrible. *Disclaimer: This review was written under the Sears Product Review Points Offer. A reward may have been provided in return for a review. Receipt of this reward was not contingent upon a positive or negative review.
The reviewer indicated they are affiliated with this product.
Santa Ana, CA
I love Craftsman tools! They are what I buy exclusively. The return policy is bar none the best in the industry. Every few years I return a few rusty or old tools and its so easy. I love how convenient and simple they make this process. It's one of the last great customer service transactions left.
I am never disappointed in the quality of Craftsman tools. They always get the job done. These torx bits were a little expensive (hence the 3 stars) but I needed them and so I bit the bullet. I prefer these to the screwdriver bit set as this comes with a #45 and #50 which you can't find with the screwdriver set, and it is helpful to be able to slap extensions on your ratchet (which is more difficult with the screwdriver set).
Excelletn and High quality products that mate perfectly to craftsman rachets. All Sizes necessary for multiple projects around the house and in the garage. Fits many industry standardized Torx bit sizes for various project scales, big and small.
Church Hill, TN
Thank goodness these have a lifetime warranty! Using one of the bits to remove and reinstall a gas valve, it broke. It seems the material used for the bits is to brittle because the tip snapped with very little torque being applied. I bought these to save myself a 40 mile roudtrip drive home to get my Cornwell bits. Needless to say, I made the drive to get my good tamper proof bits so I could get the the valve back together and finish the job.
Las Vegas, NV
- Free shipping! Orders $59 or more Offer ends 31-Aug-2014 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends 31-Dec-2014 See details.
- Online Only! Extra Savings on select tools Sold by Sears! Offer ends 02-Aug-2014 See details.