Share This Page Print

 00914966000-1
Enlarge Image

Craftsman  8' Stainless Steel Work Surface

  Item#  00914966000 | Model#  14966
Close

Create a Review

 
 
 Rating 4.0 | 18 Reviews | Write a review
Reg Price: $249.99
Savings: $30.00
$219.99
I Own This Add to List
 

Specifications & Dimensions

Dimensions:
Depth (in.): 24
Height (in.): 1.5
Length (in.): 8
Table Dimensions: 96 W x 1-1/2 H x 24 D in.
Width (in.): 96
Product Overview:
Item Weight (lbs.): 40
Color:
Color/Finish: Stainless Steel
Table:
Worksurface Back Trough: Yes
Worksurface Material: Stainless steel
Worksurface Thickness: 1-1/2 in.

Overview

Ratings & Reviews

Special

Projects

Product Description

Build a custom workbench in 4 simple steps:1. Select your workbench frame 2. Select your worksurface material3. Add storage modules4. Add accessories"

  • Select this 8' stainless steel worksurface to continue building your custom workbench
  • 96"W x 24"D x 1.5"H worksurface provides a spacious, durable work area
    • Stainless steel material resists liquids and chemical spills
      • 1,450 lb. overall load capacity when combined with workbench (sold separately
      • 40 lbs. (18 kg)

This product comes with:

Added on September 26, 2009

 

Overall, others give this:

18 Reviews Write a review
17 Reviewers (94.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
1stars
(0)

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise3 found this helpful
2002XX
Aug 22 , 2011
good top for your bench

Nice looking heavy top for your workbench. The weight comes from the MDF slab and then there is a stainless steel shell over it. You have to build your base and  center the top on the ends then mark the holes and then drill your own holes. Put back on base and put in 8 corse thread bolts. Now the instructions tell you to put an inch and a half over hang on the back of this top, but if you buy the back wall unit it has to be mounted flush in the back. Also if you put the back wall unit on they want you to drill through your stainless steel top to screw the back wall unit to it. Also the back splash piece does not go on if you are putting on the back wall unit. Just letting you know to save you the headache. It is a decent top but a little expensive and be sure you know what all units you are adding to your bench before installing top. Also mine did come with a small dent but if you buy any of the drawers, shelf, or back wall units to go with this bench system you better get used to dents, dings, small straches, and some bent metal because every unit and the base and the top had imperfections in them.

Criticism2 found this helpful
SmokeLeader1
Jan 23 , 2013
Good worktop, poor frame kit installation instructions
The work bench frame kit installation instructions do not incorporate what needs to change when also installing the shelf kit and back peg board kit. The frame kit instructs the places of the holes to mount the bench top to the frame are not compatible when you install the back peg board kit. It would be better to incorporate these optional instructions. Sears sells these optional kits as add-ons, but the instructions are deficient. It causes rework to relocate the bench top mounting holes and that bench top is heavy! Once it was finished, it turned out to be a great bench!
 

jsmith5069

Pawling, NY

Nov 18 , 2013
via sears.com
Overall
Well constructed

Nice product. It is very heavy; you may need help moving it. It is a very nice surface once it is installed.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

steel1233

Bloomingdale, IL

May 25 , 2013
Overall
good

its a good surface.

I would recommend this product to a friend.

The reviewer indicated they received a sample of this product.
Helpful
(0)
Not Helpful
(0)
Flag this Review

dhbj

Boise, ID

Feb 28 , 2013
via sears.com
Overall
good stuff

nice

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

chris0683

North Brunswick, NJ

Feb 5 , 2013
via sears.com
Overall
Wood, underneeth coated with stainless.

Looks Amazing !. thought it was all stainless by the description, but didnt make sense, its wood underneeth. I have a buble in the middle of mine, which I hope settles in the summer (im not taking the whole thing apart). I will scratch so be careful. I am picky but I need to remember its a garage and I bought it to use it. You can only see the surface scratches up close. Will probably polish out.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(2)
Flag this Review

SmokeLeader1

Andover, MN

Jan 23 , 2013
via sears.com
Overall
Good worktop, poor frame kit installation instructions

The work bench frame kit installation instructions do not incorporate what needs to change when also installing the shelf kit and back peg board kit. The frame kit instructs the places of the holes to mount the bench top to the frame are not compatible when you install the back peg board kit. It would be better to incorporate these optional instructions. Sears sells these optional kits as add-ons, but the instructions are deficient. It causes rework to relocate the bench top mounting holes and that bench top is heavy! Once it was finished, it turned out to be a great bench!

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(1)
Flag this Review

CommonJoe

Powder Springs, GA

Jan 23 , 2013
Overall
**********READ BEFORE ASSEMBLY********

It will take two people to lift (very difficult if not) and will require you to attach top to frame by marking holes and drilling.  

If you purchase a backwall do not place top on until back wall is assembled.

SS top will not fit properly with back wall.  

Product is above average. 

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(1)
Flag this Review

deanoo

Seabeck, WA

Jan 2 , 2013
via sears.com
Overall
Instructions

Instruction need to get to the main point right away. If you buy the complete set up you must put certain peices togeather first

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(1)
Flag this Review

garagedude

Wisconsin Rapids, WI

Dec 24 , 2012
via sears.com
Overall
Remember when

sears tools used to be made in America? Remember when you'd be watching this old house with bob villa and he'd be selling craftsmen tools made in America? Those days are gone. The stainless tops I ordered came in very nice shape, no dents or scratches, made in Mexico though. They weigh about 140lbs (I'm not kidding) each cause they have a slab of mdf glued to their undersides. This top is alright for the weekend warrior doityourselfer but I wouldn't recommend it for any professional auto shops. The stainless skin is very thin and would probably dent easily from hammer blows. Still, it looks great mounted on the black frame.

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review

Airplanedoctor

Van Nuys, CA

Nov 21 , 2012
via sears.com
Overall
Fantastic working surface!

Easy to assemble and definitely a fantastic working surface for my garage!

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

mikecap57

Rancho Palos Verdes, CA

Oct 16 , 2012
via sears.com
Overall
8' Stainless Steel Work Surface

I deliberated on whether to buy the stainless steel top or the other ones offered by Sears. After reading most of the reviews, I went with the stainless one and I?m glad I did. Very nice product. Like some of the other reviews, it is very heavy and you will need two people to lift it up. I purchased the 8? top along with the matching frame and the three and five drawer cabinets. Looks great together. Read all of the instructions before starting as you have to eliminate some parts when you are putting the frame together if you are adding the cabinets to your workbench. Takes a little bit of time, but definitely well worth it. None of products were damaged and it all came together fairly easily. Take your time to measure and square everything before tightening. Really looks sharp and well built.

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends   31-Dec-2014 See details.
  • Get this Tool Item at a limited time Hot Price! Sold By Sears Offer ends   03-May-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x