Specifications & Dimensions
|Depth (in.):||24 in.|
|Width (in.):||96 in.|
|Item Weight (lbs.):||69.0 lbs.|
|Color/Finish:||Baked enamel Black|
|Assembly Required:||Assembly Required|
Ratings & Reviews
Build a custom workbench in 4 simple steps:1. Select your workbench frame 2. Select your worksurface material3. Add storage modules4. Add accessories"
- Select this 8' workbench frame to start building your custom workbench
- Four large adjustable leveling feet provide stability on uneven floors
- 1,450 lb. overall load capacity
- Full-width backsplash prevents items from rolling off the back
- Choose from a variety of 8' worksurfaces to add to the frame (sold separately)
- Accepts up to two storage modules to add additional storage (sold separately)
- Black in color
- Also available in red (009-14925)
- 96" W x 24" D x 41 1/4" H
- 69 lbs. (31 kg)
- Assembly required
Added on September 26, 2009
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
This frame provides the basis for a great workbench. I purchased the 8' frame (item # 0091494000) and two drawer modules (item # 00914927000) on-line for delivery to my local Sears store. All items arrived at the store in 5 days just as Sears projected. The items were packaged very well and there was zero damage. All necessary hardware was included and the assembly instructions were fairly clear. Assembly of the three items took about 5 hours. The fit and finish of the completed workbench frame and drawer modules was perfect. I have purchased a couple of other Craftsman workbenches over the years (both still in service)... this is by far the best and is worthy of the Craftsman name.
I opted to make the top for this workbench myself rather than purchase any of the options available from Sears. I used a 2' x 8' piece of 3/4" plywood and topped it with 3/4" tongue and groove oak flooring, then added an edge frame of 1" x 2" oak on the front and sides. Hand sanding and a Watco Danish Oil finish (medium walnut) provided an outstanding top at half the price of the Sears options.
Bottom line: This frame provides for an outstanding workbench that is sturdy, functional and great looking. Fit for a craftsman.
While sold as modular, you have to do a good bit of engineering and customizing to make the different add-ons fit this bench. If adding drawers or shelves, you will have to cut the braces to accommodate them, and the reinforcing bars will not work. You would think the engineers would have made this seamless, but you have to be creative when assembling, and by all means, open all the boxes first and read all the directions together. Assembling one at a time will lead to many instances of disassembling completed work in order to add the next piece, which will invariable share bolt holes. Almost every piece was bent or buckled, most pounded out flat but poor job of designing the shipping containers. Door for the shelves was too bent to use, took it back and lived without as I didn't want to disassemble three other components to put a new one on. Once assembled, this is slick. I got the bench, butcher block top, back-splash, peg board backer with light, shelves on one side and drawers on the other, plus a matching cabinet next to it. Very sharp and practical, but what a pain to assemble. Two people, two days to put all of it together, both of us very handy. Many of the instructions are in Spanish. Not one set in Spanish and one in English, but one set SHARED between English and Spanish. You must refer to the diagrams in the Spanish set. Instructions and Engineering are woeful, but it is a nice bench.
The Directions are all over the place and if you purchase anything to add to this bench do not put on the stiffening pieces that the directions tell you to. The engineers definitely need to go back to the drawing board on this one and all the add ons. Seems to be built pretty cheaply without much thought put into the directions.
Sorry, nice workbench but your instructions are lacking and this does not integrate well with other tiems. Most notably the 5 drawer side unit and the butcher block top. When using the 8' workbench it tells you to use the brace for support. When installing the drawers, however, they will not work with the extra brace and also will not fit with the extra back support. You get to unwind it all and take them off, leaving questions about rigidity and support, or you get a dremel and cut out notches in the fram so the support for the drawers will fit. You did not so your homework, When installing the butcher block top I pre-drilled the holes exactly as described but when putting the back splash on the corner screws split the top. You should have pre-drilled and put metal inserts into the wood top. Now I have a cracked top and a bench frame that is cut to **** from a dremel.
North Brunswick, NJ
Made my shop... just 100%. The legs are thin aluminum so you need to watch out that the morons that throw these things around the warehouse dont bend them !. They did, but I didnt take it back, its plyable and I just bent it back. I also plan on getting the shelf and drawer kit which I think will steady it out even more. Stainless steel top looks amazing.
I purchased the frame, backwall, and butcher block top -- all of the 8' variety. Assembly took about five hours because the instructions are not as clear as they could be and the illustrations are maddeningly small. I recommend a magnifying glass and some experience in reading mechanical drawings. There are a few times when you will need the help of another person, such as when turning the frame upside down or when lifting the butcher block top. In fact, we could have used a third person during the mounting of the top light assembly. The finished product is very nice and solid. Be aware that the top of the work surface is 42" high. If you are under 5'-10" tall, you might consider getting a box or a stack of Craftsman floor mats to stand on when using this bench.
Wisconsin Rapids, WI
I ordered 3 of these frames to go with the stainless worktops I ordered. It's been a couple of weeks and 2 of them finally showed at the local sears, the third is MIA. I get them home and one of them was crunched in the box. The other had bent parts so I combined the two to make one good frame, I'm taking the other one back. The stampings are very light weight but no worse than you'd find in other stores. They are also very tall at 41 & 1/4" tall and as high as 43" once you attach a worktop to it. Now I get to wait for the 2 frame kits I still need. The store guys were apologetic about the long wait and damage. Sears needs to work on their warehousing and shipping though.
Oklahoma City, OK
This bench is made in the U.S. which is one reason why I bought it. Happy to say I am pleased with the ease of assembly and sturdiness. Bought the butcher block top ( made in Vietnam) easy to mount with no problems. About 1 hour for full assembly
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends 31-Dec-2014 See details.
- Online Only! Extra 10% off select Garage Storage, Tool Storage, and Air Tools! Sold by Sears. Offer ends 22-Mar-2014 See details.