Share This Page Print

Enlarge Image

Craftsman  C3 Hammer Drill Add On Tool

  Item#  00925342000 | Model#  11580X

Create a Review

 Rating 5.0 | 5 Reviews | Write a review
I Own This Add to List

Specifications & Dimensions

Length (in.): 9.5
Weight - Battery Installed (lbs): 4.5
Weight - Excluding Battery (lbs): 3.5
Dimensions and Weight:
Height (in.): 7.75
Width (in.): 3.25
Color/Finish: Black, Silver, Red
Number of Batteries Included: None
Included with Item:
Battery Included: Battery Not Included
Case Included: No
Installation Requirements:
Setup Requirements: Light assembly may be required
RPM: 1600
Controls, Feedback:
Bubble Level Included: Yes
Chuck Key Type: Keyless
Battery Type: Lithium ion
Battery Voltage: 19.2
Included with Items:
Bits Included: Yes


Ratings & Reviews



Product Description

A solid addition to any shop, this Craftsman C3 1/2" Hammer Drill Add On Tool with the versatility of powerful torque, high RPMs and portable power. Utilizing the energy of a lightweight, yet powerful 19.2 volt lithium battery it delivers up to 515 inch pounds of torque(while using a 35702 C3 battery)., while a simple shift in gears with a clutch bypass switch it delivers up to 1600 RPMs of fast driving action. Easy to control and maneuver, its lightweight frame and ergonomic design are built for a sure grip, while the 24 position adjustable torque clutch drives with precision.  Has a 1/2" Single Sleeve Metal Ratcheting Jacobs Chuck for tight bit holds

½” Metal Ratcheting Chuck
515 in. lbs. of Torque (while using a 35702 C3 battery)
3 Position Clutch Bypass for easy mode changes
Integrated LED work light
Micro-textured Grip

This product is:
  • Available for Gift Wrap
This product comes with:

Added on September 20, 2013


Overall, others give this:

5 Reviews Write a review
5 Reviewers (100.0%) would recommend this to a friend.
Overall Rating Breakdown:

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.



Hastings, MI

Jul 15 , 2014
via mobile
Great Drill!

This drill is a beast. I love the hammer drill function and how easy it is to switch the modes on it. Also nice that it has a light and comes with a bolt on handle for those times you really need to put weight into it. Only giving 4 stars because it doesnt come with a battery or charger and they're expensive.

I would recommend this product to a friend.

Not Helpful
Flag this Review


Calexico, CA

Jun 16 , 2014

i use all in one, if i need hammer i use it, and then if i need a drill i use it all in the same tool, perfect.

I would recommend this product to a friend.

The reviewer indicated they are affiliated with this product.
Not Helpful
Flag this Review


Houston, TX

Apr 11 , 2014
Compact hammer drill

The C3 hammer drill is very light and compact. It packs more than enough power for average homeowners. I use the hammer drill with the XCP lithium battery. I have no problem drilling into mortar and bricks.

I would recommend this product to a friend.

Not Helpful
Flag this Review


Melbourne, FL

Mar 25 , 2014
Good Hammer Drill

Good Strong and dependable

I would recommend this product to a friend.

Not Helpful
Flag this Review
Dec 9 , 2013
New model. Love the old one - this is better, one problem.

First, the person with the review claiming a bearing problem after 2 years doesn't realize this is a new model that came out in late 2013, clearly not this drill. Second, I have owned the previous hammer drill model (the same he had) for 4 years and it has been great. I have used that model for countless drills into concrete foundations (5/8" bit, not small), concrete block, metal, and wood. I am not a contractor, but used this drill to renovate a basement, and do 20+ projects between my home and two rental properties. I also do some moonlighting doing simple jobs running cat5 for small businesses. Once I saw I could upgrade to this new model for ~$70, I had to bite. Comparing this to the old one, I can see the following improvements: - The ratcheting chuck! - Instead of gripping the chuck with two hands and turning in opposite directions (which rarely holds a masonry bit under load), or gripping it as tight as you can and pulling the trigger until your hand or gloves burn, you just grip and turn using one hand and it automatically locks direction and ratchets down on the bit until you can't turn anymore. - More power, not night and day, but certainly more - Smaller body, this fits much better in my tool box (pretty much same weight) - Better fit/finish, grips and looks are much nicer - Quieter motor, or at least not as harsh sounding - The top level uses gel instead of liquid so the bubble moves slower. I find it easier to lock on to a level position The one problem so far - They removed the back level (the circular one). I'll take this one over the old model any day, but I am really annoyed with this oversight. This is very poor product management. I would gladly pay $10 more to know I am drilling straight up or down! You cannot find another drill with the same power and functionality for anywhere close to the cost of this one. The old hammer drill model was my introduction to the C3 series and now I am the owner of a handful of the other tools. Just make sure you use these with the basic lithium or xrp batteries - nicad is sure to disappoint.

I would recommend this product to a friend.

Not Helpful
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   31-Aug-2014 See details.
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - Offer ends   31-Dec-2014 See details.
  • Get $10 back in points when placing a tool order online for $99 and choosing free store pick up. Offer ends   23-Aug-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x