Specifications & Dimensions
|Fence Size (HxL) (In):||1-3/4 in.|
|Crosscut Capacity - 0 Miter 0 Bevel:||2 in. x 4 in.|
|Crosscut Capacity - 0 Miter 45 Left Bevel:||1-1/2 in. x 4 in.|
|Crosscut Capacity - 45 Miter 0 Bevel:||2 in. x 2-7/8 in.|
|Crosscut Capacity - 45 Miter 45 Left Bevel:||1-1/2 in. x 2-7/8 in.|
|Item Weight (lbs.):||8|
|Package Contents:||Saw, Blade, Blade Wrench, Instruction Manual, Clamps|
|Blade Diameter (In):||7.25|
|Arbor Size:||5/8 in.|
|Blade Bevel Range:||0-45 deg.|
|Cut Depth At 45 Degrees:||1-1/2 in.|
|Cut Depth At 90 Degrees:||2 in.|
Ratings & Reviews
Craftsman Miter Saw Never Misses the Mark
Be the master of precision with the Craftsman 7 1/4inch Compound Miter Saw. Whether you work with wood professionally or as a hobby, this saw will make impressively-accurate crosscuts, miter, bevel and compound cuts. It slices through wood perfectly regardless of the position it's in and will make sure it stays steady while you're working. It's a tool set essential for carpenters, construction teams and woodwork buffs.
The Craftsman Miter Saw is powered by a 7A arbor motor and 120 voltage. It has a 30 minute duty cycle, giving you freedom to get a lot of work in just a day. It features a no load speed of 5000rpm. This 13 pound powerful machine is a great tool for every respectable craftsman. How long does it take for a wood chuck to chuck wood? With this miter saw ... it's in no time.
- Make impressively precise cuts with this Craftsman 7 1/4inch Compound Miter Saw
- You can make accurate crosscuts, miter, bevel and compound cuts
- It cuts expertly regardless of the angle of the wood
- Runs on a powerful 7A arbor motor with 120 voltage
- 30 minute duty cycle increases daily productivity
- Features a no load speed of 5000rpm
- Total weight of 13 lbs.
- Has a 1-5/8 in. vacuum port
- Available for Gift Wrap
Added on October 13, 2012
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
Ocean Springs, MS
Bought online as a guest because the website kept locking up at checkout. But, that aside.....This package arrived in 4 days packed well. I checked it for square and it was right on the money; after a minor adjustment on the laser sight it set dead on a near perfect 90 degree angle. I angled the head over for a 30 degree cut and it was off by one degree....OK! I like this little thing and upon first impressions, it is a very good low-end saw with simple features that make it useful. The cost makes it even more attractive. It is a decent saw. I gave it 4 stars because the laser needed to be adjusted; the manual says it is adjust correctly at manufacturing.
I bought this saw one day when i was at sears i saw the great deal. I would recommend this saw to anyone doing trim work or wants a perfect cut on 2x4's
The reviewer indicated they are affiliated with this product.
Long Branch, NJ
I have beeen wanting a small machine for my trim moldings ( my big one is 50lbs ) this is 13, so I finally went for this on sale at sears ($49.99) and It cuts 2x4's with ease, the laser is very nice, I am more than happy with this small light weight machine :))
I bought this for my husband. He does many small jobs both in our home and for others and he needed something that would be light, easy to carry and yet powerful. This has been perfect.
I'm not cutting any crown molding so the limitations of this miter saw is not that great. You have to know and accept its limitations. Its a nice little miter saw for around the house projects where precision cuts count. Face it, large cuts usually don't need that precision. I expect with any large miter cuts I can start with this to get the angle and finish it off with a hand or circular saw. I've gotten by with only a miter box for years so this is a step up. The old style hardwood miter boxes are getting rare and expensive and plastic one's are a problem so I sprung for more capability and am happy with this. I mounted it on a sawhorse plywood table and carry it where needed. So far its working out fine.
We've been looking for a miter saw that we could use when installing laminate floors, after doing a lot of research on other brands we saw the Craftsman saw and we knew we'd found exactly what we were looking for. It's light enough to carry and set up anywhere, but don't let that fool you, it is a workhorse and we're so pleased that we purchased it.
Vero Beach, FL
I purchased this product because it carried the "CRAFTSMEN LOGO". I thought it would be of the high quality that craftsmen is noted for. The materials used were inferior and poorly constructed. I know the product is at the low end but as I said it carried the CRAFTSMEN NAME. I purchased a Ryobi saw and I am very pleased the quality is superior and was at the same price.
Cuts fast and clean. However, I bought it to cut crown molding, which is done with the wood at a 45 degree angle between the base plate and the back fender. Unfortunately, the back fender is not tall enough to use for crown molding. It would be great for all other types of molding however. Had to go out and buy a saw with a 10 inch blade to complete my task.
- Free shipping! Orders $59 or more Offer ends 30-Apr-2014 See details.
- MAX Member Exclusive. Choose FREE Store Pickup and Get 5% back in points! Offer ends 30-Jun-2014 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends 19-Apr-2014 See details.