Craftsman 10'' Jobsite Table SawSears Exclusive. | Item# 00941502000 | Model# JT2503RC
|Dust Port Outside Diameter (in):||2.5|
|Maixmum Dado Diameter (in):||8|
|Maximum Cut Depth at 45° (in):||2.5|
|Maximum Cut Depth at 90° (in):||3.125|
|Maximum Dado Width (in.):||.812|
|Table Dimensions (LxW):||24-3/32 x 20-3/4|
|Table Dimensions with Extensions:||44-3/16 x 20-3/4|
|Table Height From Floor (In):||36|
|Fence Type - Open text:||Cam Locking|
|Item Weight (lbs.):||87|
|Package Contents:||Table Saw, Extension, Fence, Miter, Blade, Guard, Blade Wrench, Stand, Push Stick|
|Table Saw Style:||Bench Top Table Saw|
|Materials & Finishes:|
|Cord Length (ft.):||6|
|Cord Management:||Cord clip|
|Cord Type:||14 gauge|
|Blade Diameter (In):||10|
|Arbor Speed (RPM):||4000|
|Guides & Instructions:|
|Arbor Size:||5/8 in.|
|Table Material:||Die cast aluminum|
|Table Tilt Range:||Left 0-45 deg.|
|Left Rip Capacity:||11 in.|
|Maximum Cut Depth:||3.125|
|Right Rip Capacity:||24 in.|
|Assembly Required:||Assembly Required|
Ratings & Reviews
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
Mc Farland, WI
This saw is extremely accurate. everything out of the box was within 1/128" so i left it. The fence has to be the best part of the saw. It is incredibly heavy duty and always locks square. The new blade lift mechanism is a plus and the one wrench blade change is fast and easy. The stand is also very beefy and made of high quality materials that will withstand abuse. The miter gauge is metal and has very little play for a portable table saw. The saw's max rip capacity is 25 1/2" which is great and the extensions are built into the table and do not flex. the only thing that i would have liked to see would have been an out feed table and a blade guard with dust collection. Over all i highly recommend this saw to anyone looking for a high quality portable saw
Its a realy great running saw Out of all the saw's on the floor This one made the cut This saw is fast and accurate I couldn't have made a better buy I like the idea of a folding tablesaw If I need to go on the road and do work other place's this realy work's for me this saw is outstanding
While I was putting it together I was very happy with the quality and Versatility of the product; I started to use it and could not get a straight cut, so I started checking everything out to make sure I had set it up correctly. I found that even after maxing out the adjustments it was not possible to square off the blade to the miter track. The other issue I had was no blade height lock. Unfortunately I had to return it and they took it back without a hitch.
The saw took about an hour to unpack and set up. I am familiar with table saws so some of the parts may not make sense (to someone inexperienced) per the manual. AlthoughI 've not yet made any cuts when it truly mattered, after a few passes with some 1 x 4 scraps, the saw worked as it should. Fence is accurate (always use a tape measure) and the motor did not display any of the violent wobble noted by some others. The base is secure enough but I'd recommend a helper for sheet material. All in all good value for $400.
The saw and stand went together easily. The fence was perfectly aligned to the blade. The fence was more than expected in its accuracy. Even to the measuring guide on the table. However, as i turned the saw on for the first time it immediately started to vibrate violently and I shut it off. I checked the table for level to the floor and also the arbor nut tightness. All was good. Turned it on again and same result. I then changed blades to a new out of the package Diablo blade...same results. Checked the arbor nut again and that is when i found the problem...Arbor shaft was loose and wobbled the blade almost 1/8" in either direction. UGH! No adjustments can be made to solve this...especially on a new saw. So i brought it back and the only unit available was a floor model. Before taking it off the floor i put a blade on it and lo and behold same arbor wobble. Checked the cheapest Craftsman table saw on the floor and they were tight as can be. Sears has a definite problem with this saw. If you purchase it just be cautious when you turn it on the first time...or check the arbor for play. As I said, everything was perfect...except the saw. ****, I really like it too.
I bought this saw for my shop. After using it to cut dados, I noticed that the blade moves down with the saw is on. Not a good thing if the depth of the cut moves. After look reading the manual it has a blade angle lock but no blade height lock. So I am returning it.