Share This Page Print

 spin_prod_673331401
Enlarge Image

Craftsman  Dual Bar Bumper

  Item#  07124612000 | Model#  24612
Close

Create a Review

 
 
 Rating 4.5 | 42 Reviews | Write a review
Reg Price: $59.99
Savings: $15.00
$44.99
I Own This Add to List
 

Specifications & Dimensions

Product Overview:
Assembly Required: Assembly Required
Fits Brands/Models: See product description for details
Mounting Hardware Included: Yes
Color:
Color/Finish: Black
Warranty:
General Warranty: 1 year limited
Dimensions and Weight:
Item Weight (lbs.): 13
Others:
Vehicle Type: Tractors only

Overview

Ratings & Reviews

Special

Projects

Product Description

The Tractor Bumper Dual Bar Has Your Tractor Covered through Tough Tasks

Add both protection and style to the front end of your tractor and headlights, and prevent accidental damage with the super-strong Craftsman Dual Bar Tractor Bumper Constructed of one-piece, heavy-gauge steel tubing this dual bar bumper adds super-strong durability and protection to your Craftsman tractor. A rugged black, powder-coated finish adds scratch- and chip-resistant performance, as well as all-weather durability. When attached, the brush guard gives you easy access to your tractor – to open the tractor hood, you simply pull the lover to lower the bumper.

The Tractor Bumper Dual Barmounts easily to the tractor frame with included hardware. It fits all Craftsman and Husqvarna-brand front-engine tractors (except zero turn, rear engine rider and CTX series). The bumper can save you costly time and money with replacement expenses in excess of $100. One little fender bender, and you could be buying a new hood, headlights or grill due to damage – the brush guard adds the no-hassle protection you need to keep your tractor looking and working its best.

  • The Craftsman Dual Bar Tractor Bumper guards your tractor as it works for you
  • Comes with a 1-year limited warranty to protect your investment
  • Weighing a super-light 13 lbs., it's extremely maneuverable and portable
  • Fits all Craftsman and Husqvarna-brand front-engine tractors (except zero turn, rear engine rider and CTX series)
  • Protects your tractor and front headlights from accidental damage
  • Constructed of one-piece heavy-gauge steel tubing for a lifetime of durability
  • Black powder-coated finish resists scratches and chips
  • Mounts easily to tractor with hardware included
  • Offers easy access to tractor
  • Some minimal assembly required

Added on January 24, 2010

 

Overall, others give this:

42 Reviews Write a review
33 Reviewers (79.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise4 found this helpful
MilesDavis
May 17 , 2011
Useful addition to tractor

This bar is built sturdy and provides protection against damage from low-impact front collisions. I also like the way it looks on the tractor. These are my assembly observations. First, for Craftsman model YT 4000 yard tractor, you do not need to remove the hood. Just raise it. You will need to remove the browning plate as described in the manual. Attach by placing washer on carriage bolt and inserting bolt through tractor frame from under neath tractor (bolt will point to outside) using first front bottom hole on tractor frame and 3rd hole on front of bumper bracket. Secure with whiznut. Do this for both sides and tighten. Now is tricky part. Place washer on bolt and insert into curved rear portion of bumper bracket and into top hole in rear of tractor frame with bolt pointing towards inside. If you follow manual and use same procedure as first bolts, you may have some difficulty holding bolt in place while you tighten whiznut do to limited work space. I found there is sufficient room on inside to use wrench (socket or standard) to tighten whiznut but very difficult to use pliers to hold bolt in that confined space. In other words, when you finish, you will have lower whiznut on outside of tractor frame and higher whiznut on inside of frame. This may not be an issue if you have small hands. Please note that in normal operation, the bumper becomes hot to the touch due to its proximity to engine components. Two of the end plugs became deformed and fell out, but this was no big deal for me. Over all, nice addition but assembly instructions leave quite a bit to be desired.

Criticism2 found this helpful
InstructOne
May 26 , 2013
Looks Good- But NOT for the YT 4000
Bumper looks good but is not a easy fit for my new YT4000 Tractor (a Sears ********). It was listed as fitting this model, but it took almost two hours for two people to reach the areas where you need to put bolts in and washers and get it so that it was level. The bolts slip through the back end of the bumper slots and you need washers to hold them. This looks really cheap and Sears could at least make sure the bolts, washers and screws were black so they are hidden. The instructions say to bolt in three places, but we were only able to match two holes on each side up with the frame. I did not take the guards off since they were held with sheet metal screws and did not want to take a chance that they would stay in place after removing them. There is little space to maneuver while working and honestly a person with average size hands does not have enough room to work. I am not sure I would put "Craftsman" on this product.
 

sunkenpirate

Greenville, NC

Mar 22 , 2014
via sears.com
Overall
easy to install

was easy to install and does not affect the hood operation at all.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

lotsatools

Ballston Spa, NY

Oct 20 , 2013
via sears.com
Overall
Craftsman dual bumper

Installation went very well. The bumper is sturdy and should do a great job of protecting the front of the mower. I had one issue with the carrage bolts. They didn't allow the mounting brackets to come tight to the frame of the mower. I used the large washers provided to compensate for this. Other than that everything was slick.

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review

Slvchris

Woodstock, GA

Oct 6 , 2013
via sears.com
Overall
Nice addition to tractor

Installs in about 30min. Looks nice. Seems sturdy.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

Brighteyes63

Northumberland, PA

Sep 27 , 2013
via sears.com
Overall
Dual Bar Bumper

Makes a nice addition to the Craftman mower.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

PLC4me

Powhatan, VA

Aug 14 , 2013
via sears.com
Overall
Okay, but not great!

Bought this bumper bar last year to help protect the front of my new YT4000. Installation was fairly easy & the bar looks good. My only complaint is the plastic end caps that go in each end of the horizontal tubes do not stay in. After about a month after installing the bar, 3 of the 4 end caps had come out, loosing 2 of the 3. When I attempted to get replacements, I was told they were not available. The salesman @ the Sears store where I bought the bar suggested I just returned the whole bar & get another one. I figured another bar would just do the same thing, so I elected to just keep the one I had. Now all 4 end tubes caps are gone. Sears sells parts for everything else, it would be nice if they would provide these end caps as a "part" available for sale as well. Or maybe these end caps should be pre-installed in the bar.


Helpful
(1)
Not Helpful
(1)
Flag this Review

craftsmanforever41

Warren, OH

Aug 2 , 2013
via sears.com
Overall
bumper bar

easy to install and grandkids used it already , bump.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

NPSRanger

Custer, SD

Jul 28 , 2013
via sears.com
Overall
Looks Good, but Be Prepared to Toss the Installation Directions

The dual bumper looks great on the lawn tractor, and it does seem like it will prevent damage to the front end from minor bumps and scratches. I was pleased with the overall appearance. However, the bumper's pre-drilled bolt holes do not necessarily line up with the available bolt holes on the Craftsman LT2000. The directions for the bumper installation do not complement the set-up ... so, be prepared to simply use two bolts on each side. If you use one bolt, lock washer, and nut in one hole set, then use the lag screw (bolt) in a second hole, it works fine. These parts come from both the A and B bags. I hate to suggest that you will be "winging it" ... but, two holes do line up fairly nicely if you do not necessarily follow the directions. Hope this helps ...

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(1)
Flag this Review

jmbaker

Brooksville, FL

Jul 18 , 2013
via sears.com
Overall
Looks sharp

Tractor was a Mothers Day gift from my son, however I rec'd a lot of help from my local Sears store in being taught about the new features on my Craftsman. Buying the "bumper " was my choice, not only because it looks sharp, it is protection for tractor headlights and front end..."woman driver" you know. Also, as my daughter will be "learning" to run the mower, a ounce of prevention is worth a pound of cure!.

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review
Jul 12 , 2013
via sears.com
Overall
Important addition

Our property is full of small trees that arde difficult to always navigate in this hilly terrain. I opted to purchase it on a whim butnow am happy I did. It rotects the front of the tractor nicely. I was surprised when I ordered it and the tractor at the same time and the delivery people asslembled it before they arrived at our rural place. I rated lit "Good" because I have only used it a short time.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

BrewCityRider

Racine, WI

Jun 30 , 2013
via sears.com
Overall
Nice addition

My YT4000 was delivered today without the bumper attached...hmmm. OK, so I proceed to install it with the help of my son (smaller hands.) First you identify which install goes with your tractor as this is a multi-fit type part. Next, study the instructions and your tractor and you will realize that there is no need to remove the hood or the browning plate. (Sears please fix the manual.) Just 2 carriage bolts per side through the back of the frame (find someone with small hands,) then a washer and secure with whizlock nuts. You have your choice of three mounting positions...I selected the middle position, which looks good and allows the hood to fully open. The hood just barely touches one side of the bumper when open. I reduced my rating by one star because after 45 minutes of operation the top right plug began to melt and then fell out. This is near the muffler. Really Sears? C'mon, design a metal plug for the bumper ends.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review
  • Online Only! EXTRA 10% off tractor attachments sold by Sears. Offer ends 5/3/14 7pm CT. Offer ends   02-May-2014 See details.
  • MEMBERS-15% in points on attachments with any riding mower & $350 in attachments purchase. Offer ends   02-May-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x