Specifications & Dimensions
|Dimensions and Weight:|
|Item Weight (lbs.):||13|
|Assembly Required:||Assembly Required|
|Fits Brands/Models:||See product description for details|
|Mounting Hardware Included:||Yes|
|General Warranty:||1 year limited|
Ratings & Reviews
The Tractor Bumper Dual Bar Has Your Tractor Covered through Tough Tasks
Add both protection and style to the front end of your tractor and headlights, and prevent accidental damage with the super-strong Craftsman Dual Bar Tractor Bumper Constructed of one-piece, heavy-gauge steel tubing this dual bar bumper adds super-strong durability and protection to your Craftsman tractor. A rugged black, powder-coated finish adds scratch- and chip-resistant performance, as well as all-weather durability. When attached, the brush guard gives you easy access to your tractor – to open the tractor hood, you simply pull the lover to lower the bumper.
The Tractor Bumper Dual Barmounts easily to the tractor frame with included hardware. It fits all Craftsman and Husqvarna-brand front-engine tractors (except zero turn, rear engine rider and CTX series). The bumper can save you costly time and money with replacement expenses in excess of $100. One little fender bender, and you could be buying a new hood, headlights or grill due to damage – the brush guard adds the no-hassle protection you need to keep your tractor looking and working its best.
- The Craftsman Dual Bar Tractor Bumper guards your tractor as it works for you
- Comes with a 1-year limited warranty to protect your investment
- Weighing a super-light 13 lbs., it's extremely maneuverable and portable
- Fits all Craftsman and Husqvarna-brand front-engine tractors (except zero turn, rear engine rider and CTX series)
- Protects your tractor and front headlights from accidental damage
- Constructed of one-piece heavy-gauge steel tubing for a lifetime of durability
- Black powder-coated finish resists scratches and chips
- Mounts easily to tractor with hardware included
- Offers easy access to tractor
- Some minimal assembly required
Added on January 24, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
West Babylon, NY
It only takes one time for the mower to get away from you and there is a lot of damage. With every new mower I get a bumper and it has paid for itself over and over. I use a hoist attached to the bumper and raise the mower so I can clean under the deck and change blades with ease. Wouldn't be without one!
Winston Salem, NC
This bumper guard was simple to install. It went on with just 4 bolts, and it was low enough NOT to interfere with raising the tractor's hood. It definitely adds protection to the front of the tractor. It blends right in and looks perfect..
I ordered this and picked up at a Sears store. Only one on hand. When I went to put it on, I found it was all scratched up. Couldn't return it being no more at the store. So I had to repaint it. Who would want to put it on a brand new mower and have it all scratched up. I suggest to check it out before leaving the store.
The reviewer indicated they are affiliated with this product.
I bought this June 16th. On the 18th I bought the double bumper. I waited until this morning June 30th to install it because of the instructions. Follow the instructions and you will end up having to take off the hood and the muffler shield. Do yourself a favor and use the box it came in for supporting the bumper while working on it. I never took off the hood or the shield. It only used 4 of the bolts that were in the box. There is only one way basically that this goes on there. The instructions are worthless. I love the look of the double bumper. I only gave 4 stars because of the instructions. I also ordered the Hour meter for it and guess what NO INSTRUCTIONS AT ALL.
This is what it is a bumper good quality, with an easy install. Wasn't too complicated at all. It does a nice job of protecting my front end when i miss judge a turn.
Lake Worth, FL
Installation only required about 10 minutes on a 917.xxxxxx (Husqvarna manufactured) tractor. The included instructions were decent, however, the instruction to remove the muffler shield may be disregarded. With the muffler shield left in place, and the bumper resting on the empty shipping box, the 4 carriage bolts were easily installed. The engine cover/hood when fully opened does however slightly make contact with the top of the bumper (just barely). It would have been nice to have at least a 1/4" of clearance, however the mounting height of the bumper is not "adjustable"; the bolt holes on the bumper brackets and the corresponding holes on the tractor frame only align in the predetermined manner. Based on the many comments regarding the plastic end-caps deforming and falling out due to the heat of the exhaust being directed onto the bumper, I opted to not bother installing them.
- 5% Instant Savings or Special financing on Lawn & Garden items over $299 with Sears card. Offer ends 30-May-2015 See details.
- Online Only! Extra 10% off Tractor Attachments items sold by Sears. Reflected in price shown. Offer ends 25-Apr-2015 See details.
- Get Quarter ct tw Diamond Earrings for $24.99 with any storewide purchase of $19.99 or more! Offer ends 31-May-2015 See details.