Craftsman EDGE Series 26-in. 6-Drawer Premium Heavy-Duty Ball-Bearing Top Chest - Midnight BlueOnline only | Item# 00940764000 | Model# 114092
Specifications & Dimensions
|Dimensions and Capacity:|
|Capacity cu. in.:||6417|
|Drawer Weight Capacity (lbs.):||100|
|Width Range:||26 to 32 in.|
|Item Weight (lbs.):||96|
|Self Latching Drawers:||Yes|
|Weight Rating:||Premium - 601 to 1000 lb. capacity|
|Number of Handles:||2|
|Drawer Slide Type:||Ball bearing|
|Warranties & Coverage:|
|General Warranty:||Limited Lifetime|
|Number of Drawers:||6|
|Number of Drawer Banks:||1|
|Materials & Finish:|
Ratings & Reviews
When you lift the lid on this Craftsman Premium Heavy-Duty 6-drawer top chest, you will notice quality features like sturdy gas struts, lid stiffener with Craftsman emboss and a large tray area. Open the drawers and you will experience solid, smooth drawer operation with DynaGlide™ drawer performance. When you want to move your unit, rest assured your drawers will stay closed with the GRIPLATCH® drawer system. Easily organize and store small to large tools in the six ball-bearing drawers that hold up to a whopping 100 pounds each. The tubular keyed lock system will ensure your investment and your profession will be secure. Add the rolling cabinet (Item #009-40767) to organize all your tools into one easy-to-use tool chest.
To view the features of the Premium Heavy-Duty line, click on this link: http://www.youtube.com/watch?v=H0PV8RJux7k&feature=youtu.be
Secure your investment and your profession with the Craftsman 6-Drawer Premium Heavy-Duty top chest
- All steel construction
- 6,417 cubic inches of storage
- GRIPLATCH® drawer system securely latches drawers in place
- Full-extension ball-bearing drawer slides hold up to 100 lbs. per drawer
- Gas cover struts keep lid open
- Heavy-duty bail side handles
- Tubular keyed lock system
- Corner trim for esthetic appeal
- Drawer dimensions:
- 5 drawers measure 22.375W x 16.5D x 2H
- 1 drawer measures 22.375W x 16.5D x 3.125H
- Also available in black
- Fully assembled
- Limited lifetime warranty
Added on October 27, 2013
Overall, others give this:
Overall Rating Breakdown:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
I purchased the top and bottom 26" tool storage as a combination set. I also purchased the 42" combination set. They were on sale at about 50% off. This was a great buy for me. After on-line research I determined the Viper tool boxes would be the best for me. Generally, their price was slightly lower than the Craftsman premium boxes and held 75 pounds per drawer. Other tool boxes were very costly, in my view, and I don't trust the HF brand to be sufficiently strong, although they are less expensive. However, when the Edge went on sale at such a good price, and since it was very close in size and strength to the Viper series, I opted to buy it. What a great decision! These tool boxes are terrific. Loaded with tools, the drawers open and close very easily. I had to put the top chests on top of the bottom chests by myself. I do not recommend you do this. Locate a partner to help. It will be much easier and faster. Since I am 70 years old, it was likely more difficult for me than it might be for those of you younger, but a helper is the best way to go. The boxes arrived undamaged. The 42" set was strapped to two separate pallets, while the 26" was inside two separate cardboard boxes. The instructions were located inside one of the drawers, although I failed to locate them and therefore, downloaded the instructions from the internet. Removing the 26" boxes from their cardboard boxes took some planning. I could have just cut out one of the sides of the cardboard box and slid the tool box out. But would have needed to be careful not to scratch it. Ultimately I removed the bottom 26" tool box first. I placed it on top of the lower 42" box (which was still inside its cardboard box). The 26" box was on its side, I was able to remove the wheels from the bottom drawer, as well as the metal wheel flanges, and then attach them to the bottom of the 26" tool box. With a partner, all of this would have been much easier. The 42" tool boxes had a pallet on the bottom but no cardboard, therefore once I cut off the straps holding the tool box onto the pallet, the cardboard was easily pulled up and off the tool box. Attaching the wheels required me to turn the bottom tool box onto its top. I used additional pallets (I had some from prior solar panel purchase) to protect the tool box as I turned it over. With a partner, all of this would have been much easier. In the end, this was an excellent purchase. The boxes are top notch. The drawer glides are smooth, loaded or unloaded. I believe the edge series comes in multiple colors, I happen to get midnight blue. Looks good with my grey and blue colored metal shop. Be sure you know what tools you intend to put into the drawers. Most of the drawers are short, only 2" high. They work for me to hold my screwdrivers, short sockets, and pliers. But taller drawers make it easier to include the odd item that is a bit bigger.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends 31-Dec-2015 See details.
- Free shipping! Orders $59 or more Offer ends 31-Dec-2015 See details.
- ONLINE ONLY! SYW Max Members get $5 back in points with a purchase of $25 or more in Tools. Offer ends 30-Apr-2015 See details.
- Get Quarter ct tw Diamond Earrings for $19.99 with any storewide purchase of $19.99 or more! Offer ends 31-May-2015 See details.
- Get Anvil or Bypass Pruner for $9.99 with any storewide purchase of $25 or more! Offer ends 31-May-2015 See details.
- Get Cheval Jewelry Mirror for $139.99 reg price $199.99, with any purchase. Offer ends 10-May-2015 See details.