Share This Page Print

 00968563000-1
Enlarge Image

Craftsman  Electric Brad Nailer

Sears Exclusive. |   Item#  00968563000 | Model#  ETT3212H
Close

Create a Review

 
 
 Rating 2.5 | 53 Reviews | Write a review
$51.99
$51.99
I Own This Add to List
 

Specifications & Dimensions

Product Overview:
Item Weight (lbs.): 3.76
Type: Electric staplers
Color:
Color/Finish: Black
Fastener Tool:
Tool Gauge Capacity: 18 ga.

Overview

Ratings & Reviews

Special

Projects

Product Description

Craftsman Electric Brad Nails It

Don't waste your time hammering away, and instead use the Craftsman electric brad nailer. Light and comfortable to hold and use, the nailer weighs a mere 3.76 pounds. Use the nailer from project to project, as it conveniently holds 5 different sizes of 18 ga. brad nails: 5/8, 3/4, 1, 1-3/16 and 1-1/4 inches. Securing nails will be done much faster, too. The nailer can secure up to 30 nails per minute.

The Craftsman electric brad will not only save you time with how many nails it can nail per minute, but also when it comes to reloading. The magazine holds 100 18 ga. nails at a time. The magazine is made of nylon and is designed to last a long time. There is also a convenient impact-force knob that allows you to control how much pressure the nails are driven in at.

  • Craftsman electric brad nailer weighs 3.76 pounds for comfort and ease of use
  • Holds up to 5 different sizes of 18 ga. nails
  • Holds nails sizes 5/8, 3/4, 1, 1-3/16 and 1-1/4 inches
  • Nails up to 30 nails per minute
  • Long-lasting nylon magazine holds 100 nails
  • Control force of nails with variable force knob

This product is:
  • Available for Gift Wrap
This product comes with:

Added on May 13, 2010

 

Overall, others give this:

53 Reviews Write a review
23 Reviewers (43.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise5 found this helpful
TheRepairMan
Mar 13 , 2012
Didn't have the problems some reviewers had
I bought this for small trim projects around the house, and after several done including building a new closet, it has yet to misfire or jamb. I'm using 1" Craftsman brads and have the power set to low, and it does fine with most trim. I ended up just throwing the little red safety cap away. It served no purpose other than to let the user know where not to put your fingers or hands when you pull the trigger. Really? Are people that stupid? Don't answer that! So, okay, it did split some oak trim a few times, but that can happen with any brad. That's not the nailer's fault at all. I also have a Craftsman compressor, and quite a few air tools, but can't imagine having to buy an air nailer unless I have to do some house framing. I got this brad nailer on sale on line which made it an even more desirable tool to have. So, I'm not saying it's the end all, be all of nailers, but for most small DIY projects should dojust fine. I plan to start framing pictures soon as I'm also into photography, and I'll really put this thing to the test, but so far, so good.
Criticism7 found this helpful
MoDave
Apr 10 , 2008
Craftsman nail gun
I have tried this thing a dozen times and it will occasionally sink a brad all the way in, but ALWAYS damages the wood at the hammer head. I wouldn't have another one if they were free.
 

Jrdude

Galax, VA

Sep 9 , 2014
via sears.com
Overall
Brad Nailer

I purchased the brad nailer with the plan of using it on white pine shelving board. Using 1.25 brads, they would only drive through half way. Not very pleased.


Helpful
(2)
Not Helpful
(0)
Flag this Review

marusca

Youngstown, OH

Sep 8 , 2014
via sears.com
Overall
electric brad nail gun

This item was purchased to do small tasks around the workshop where a small tack would be used. It is really difficult to hold a small brad and tap it with a tack hammer without hitting your finger. It performed as expected but it's not intended for the daily workplace. The packaging was not specific with details on brad sizes but will shoot longer brads which is helpful. I would purchase this item again.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

Bradleynailer

Farmington, MI

Aug 6 , 2014
via sears.com
Overall
Avoid this product for everything other than light duty applications

Bought this product to install 1/4 round around the baseboard of a hardwood floor. Bought 1 1/4" brads (largest the nailer would handle) - used it for 2 days ... approx 150-200 shots and then it quit working - like it shorted out (but no smoke or burnt electrical smell) - Sears took it back as defective and I finished my job the old fashioned way with hammer/nails and a nail set. If you're looking for a serious nailer consider upgrading to the Pneumatic (professional) type!


Helpful
(1)
Not Helpful
(0)
Flag this Review

MojoJojo

Somerset, OH

Jul 21 , 2014
via sears.com
Overall
Great product

This is a great product for the do it yourself handy person. I have only had to purchase two of these over the past 20 years and they get a lot of work.

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review

Arli13

Watertown, NY

Apr 20 , 2014
via mobile
Overall
Good nailer

Does what it's made to do. No issues really with the nailer. Good for small projects as it only nails up to 1 1/4" nails.

I would recommend this product to a friend.

Helpful
(5)
Not Helpful
(0)
Flag this Review

tkfinke

Associate

Las Vegas, NV

Mar 31 , 2014
via sears.com
Overall
1" brad could only penetrate 1/2".

Hardly worth the effort because not enough power.


Helpful
(2)
Not Helpful
(0)
Flag this Review

Ashroff

Millbrae, CA

Mar 11 , 2014
via sears.com
Overall
Very Good product at a very good price

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review

Ms.Handy

San Jose, CA

Jan 30 , 2014
via sears.com
Overall
Disappointing results

I bought this to install baseboards (made of formed sawdust) in my home. First nail didn't even make it through the wood. I pulled it out with my fingers. Second went in, but not all the way. 1/4 of it was still sticking out. As for the third try...Nothing. I mean, it was as if there were no nails in the machine. I tried 3 more times before I gave up, repackaged it and returned it to the store. Don't waste your money on this item. Not worth the hassle.


Helpful
(4)
Not Helpful
(0)
Flag this Review

Rudalee

Williamstown, KY

Jan 27 , 2014
via sears.com
Overall
great for home improvement projects

got this for a great price, great tool for working on furniture.

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review

nois4

Bourbonnais, IL

Oct 30 , 2013
via sears.com
Overall
Better then using a hammer

Used it on 3 projects so far and no problem. Great for small projects. Saves a ton of time over trying to use a hammer and nail. Makes doing projects by myself so much easier.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review
  • Members Get 10% back in points on first $500 of each qualifying purchase with a Sears Card. Offer ends   25-Dec-2014 See details.
  • Free shipping! Orders $59 or more Offer ends   31-Dec-2015 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2014 See details.
  • Get Quarter ct tw Diamond Earrings for $24.99 with a purchase of $19.99 or more! Limit 1 per order Offer ends   31-Dec-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x