Specifications & Dimensions
|Dimensions and Capacity:|
|Shank Length (in.):||4.53|
|Color and Styling:|
|Item Weight (lbs.):||1.32|
|Units Type:||SAE and Metric|
|Included with Item:|
|Drive Size:||3/16 in., 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in.|
|Drive Size:||5 mm, 6 mm, 8 mm, 10 mm, 11 mm, 12 mm|
|Materials & Finish:|
Ratings & Reviews
Dual material quick fit handle any one of the 12 single-sided nut driver blades. Blade sizes include six inch (3/16, 1/4, 5/16, 3/8, 7/16 and 1/2-in.), six metric (5, 6, 8, 10, 11 and 12 mm). Handle can also be used as a T-Handle for additional leverage. Wt. 1.32 lbs.
- Available for Gift Wrap
Added on September 26, 2009
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
the T handel on the driver is a nice feature. the deep throught is fantastic for long bots or shanks with nuts on them. constructed very well I use them daily as a Satilite installer.
first no 7mm, 8mm and 5/16 are close to each other but 7mm falls out of range. (I'll take blame on this since it does list the sizes but still 7 mm should be one of the bits) second I placed the first bit into the holder, then pulled it back out and the magnet that holds it in came out with it. Messed around for 20 min glueing the magnet back in the hole.
I bought these to use with my cordless impact driver. They are six point sockets which makes them durable enough for every day use. The sizes included are ideal for my job as a small engine mechanic. I would by these again.
I bought his for my grandson for his birthday because he does not have any tools yet. Was worried it would not be any good but it is a quality set. Will be starting a collection.
I picked up this kit because I've been wanting a nut driver set but the full screwdriver-like set seemed like it would take up too much room for how rarely I need them and may be too short at times. For my whole life (the last 20 of them with tools, anyway) I've been using the bit screwdriver that came with my socket set as a nut driver but a few times I've wished I had something a little longer and stronger. This set is nice because it's versatile enough to be used with other tools such as a drill or even an interchangeable hand screwdriver. I've only had it a few days and already made use of that needing to reach into a tight space barely wider than the width of the nut. I attached the necessary nut driver from this set to my trusty Craftsman 47483 bit screwdriver unit and extended the reach far beyond what this kit allows. I believe I even have an extender around somewhere that will make it even longer if i ever need to. I will say that the kit is a little bulkier (and heavier) than I expected but as you can see in the picture it's as small as it can be and still fit the handle. And, the heavier than expected is because each individual nut driver piece is nice and heavy and should hold up to anything I throw it at. As a non-standard use of this set, I was having trouble placing a capacitor into a tight fit on a PCB and tried futility for about 10 minutes when I thought about using one of these. I found one that the small capacitor fit into snugly without slipping out (1/4") and was able to place it into place the first try in about 10 seconds. Glad I had this set sitting on the bench from using it earlier in the day or I may have not even thought about trying that.
Great set of nut drivers. You could spend a good chunk more and get the regular craftsman set, but they all have handles. This set is worth double the price even if you throw the handle away and just use them with a drill/driver. I also like that they store a lot smaller than the traditional set. The toolbox is crowded, I don't have room for a dozen nut drivers!
I bought this item, even though I am not a fan of the Evolv line, because of its compact design. I never understood why it was necessary to waste so much drawer space with all of those individual nut drivers. Below are my pros and cons. Pros: -You can use them in a cordless drill -You can use them as a normal nut driver -You can use them in a cordless drill -You can use them as a T-handle nut driver -You can use them in a cordless drill -12 nut drivers and handle fit in that small, little case -You can use them in a cordless drill -Case zips up to prevent any drivers from being lost -You can use them in a cordless drill Cons: -It is Evolv series, wish regular Craftsman made a set -The case is nice and compact for junkyard trips, but is not ideal for staying nice and clean. My fabric holder is filthy with dirt, grease and oil. I would rather have a hard plastic case, or something less absorbant, but oh well. The good outweighs the bad with this set. It is a great design, would recommend to anyone.
East Bend, NC
This set comes in very handy for many household and automotive needs! My friend who is a handyman/mechanic liked it so much, he asked me to get him one!
- Free shipping! Orders $59 or more Offer ends 01-Nov-2014 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends 31-Dec-2014 See details.
- Online Only! Extra Savings on select tools Sold by Sears! Offer ends 04-Oct-2014 See details.