Specifications & Dimensions
|Dimensions and Capacity:|
|Shank Length (in.):||4.53|
|Color and Styling:|
|Item Weight (lbs.):||1.32|
|Units Type:||SAE and Metric|
|Included with Item:|
|Drive Size:||3/16 in., 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in.|
|Drive Size:||5 mm, 6 mm, 8 mm, 10 mm, 11 mm, 12 mm|
|Materials & Finish:|
Ratings & Reviews
Set it Straight with the 13-piece Quick Fit Nut Driver Set
The handy case keeps this Nut Driver Set organized and ready to move to the job. Comes with 12 single-sided nut driver blades. Six standard (3/16, 1/4, 5/16, 3/8, 7/16 and 1/2-in.), and six metric (5, 6, 8, 10, 11 and 12 mm). The Handle can also be used as a T-Handle for additional leverage.
The lightweight Nut Driver Set is guaranteed forever and finishes off your jobs nicely and neatly.
13-piece Quick Fit Nut Driver Set with Case
- 12 driver blades
- Comes with case
- 5, 6, 8, 10, 11 and 12 mm
- 3/16, 1/4, 5/16, 3/8, 7/16 and 1/2-in.
- Available for Gift Wrap
Added on September 26, 2009
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
the T handel on the driver is a nice feature. the deep throught is fantastic for long bots or shanks with nuts on them. constructed very well I use them daily as a Satilite installer.
I was looking for a set of interchangeable nut drivers when I found this set. They have a standard 1/4" drive shank to fit into a battery powered impact tool. The shaft is hollow up to a certain point so it's good for removing nuts on studs. The handle has dual ports to plug 2 shafts in while you work. I did this with two different sizes while assembling various items which contain a hex bolt head, and a nut in two different sizes. This saves a lot of time interchanging heads. The handle is capable of being used either straight or as a "tee" to get more gripping & turning force. The carry case is made well too.
Fort Lauderdale, FL
Was having trouble using rachet extensions , Some spaces could get les than 1/8 of a turn, Was taking forever to back bolts out, With these and a magnetic holder in my drill driver, backed bolts out in seconds rather than over two minutes and more per bolt. they fit snug with no slip, even on a couple of rusted bolts.
Kansas City, MO
I bought this tool from Sears, but when i use this set nuts for my job, I find out some nuts won't fit in and i have a hard time . I hope someone please review this tool before purchase.
The reviewer indicated they are affiliated with this product.
Fort Greely, AK
first no 7mm, 8mm and 5/16 are close to each other but 7mm falls out of range. (I'll take blame on this since it does list the sizes but still 7 mm should be one of the bits) second I placed the first bit into the holder, then pulled it back out and the magnet that holds it in came out with it. Messed around for 20 min glueing the magnet back in the hole.
I bought these to use with my cordless impact driver. They are six point sockets which makes them durable enough for every day use. The sizes included are ideal for my job as a small engine mechanic. I would by these again.