Find By Project

      • A - Screws
      • B - Nails
      • C - Grade A plywood
      • D - Wood filler
      • E - Paint/stain

      DJ Booth

      DJ Booth

      Impress your friends and be the life of the party with this custom built DJ booth.


      Date: December 7, 2011

      View Full Video


      1. Cut the front of the booth out of a 4x8 sheet of plywood. Cut a decorative arc on the top of it.

      2. Cut 2 identical side pieces at the desired width. (the height of these pieces should be flush with the bottom of the arc.

      3. Nail the front piece into the 2 side pieces.

      4. Cut 2 inch wide strips of ply to use as cleats that the shelves will rest on.

      5. Space the cleats so the shelves have ample storage height and screw them into the front and sides of booth.

      6. Cut shelves and screw them into the top of the cleats (the top shelf should be flush with the top of the side pieces).

      7. The bottom shelf needs to be spaced off the floor high enough for casters to be attached underneath. Measure the distance in between the shelves and cut 2 vertical inserts for structural support.

      8. Screw inserts in from the top and bottom.

      9. Paint or stain for the desired finish.