Specifications & Dimensions
|Dimensions and Weight:|
|Item Weight (lbs.):||1.6|
Ratings & Reviews
Craftsman Heavy Duty Air Line Filter and Regulator with Gauge has adjustable locking regulator and full flow ports to allow maximum air flow. Provides efficient water and particle removal and features an easy to read water level indicator. Features 3/8 in. NPT threaded input and output and two 3/8 in. to 1/4 in. NPT threaded reducers to accomodate smaller diameter hose. Rated to 175 PSI.
- Available for Gift Wrap
Added on July 26, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
I was a little apprehensive after reading the reviews on if i should buy this regulator/filter. I decided that i needed to find out for myself if this thing is up too the challenge or not. Let me start out by saying that the entire unit is made out of metal except for the control handle on top which is disappointing, because the unit as a whole is very sturdy. In fact, my only complaint and the reason this product does not deserve 5 stars is because the handle is made out of plastic and could very easily break under the wrong hands. I think sears should look at adding a square metal insert into the inside of the handle or beef it up in some other way. The regulator works great and if your careful the handle works fine as well.
I was able to use my shop your way rewards points and a gift card to score this guy for a great deal. I set it up and it works great no leaks and the included brass reducers help to keep the whole system at 1/4" size.
Newport News, VA
Item# 00916023000 | Model# 16023, after 14 months use ruptured on me. If my forearm was not in front of may face the pieces would be in my face not my forearm. I have another that I purchased 1 month later and seems to be fine for now. If there was away to provide photo's I would. Will be going to Sears 03/16/2014 to see what they will/will not do.
The regulator that I used frequently on my craftsman air compressor for over 15 years finally broke so I replaced it with another craftsman product and man the quality is terrible. After 2 months of use it has stopped working. Now reading other peoples reviews I see I am not alone in this issue and it is frustrating that a company was once long ago known for quality and CRAFTSMANship has sunk to this quality of product. Shame on Sears for letting us, the consumers, down. I know people can say I should return it and get a replacement by why waste my time I bet the replacement will fail as well so I am going to take the loss, buy a competitors product for half the price, and chaulk it up to a lesson learned.
Karnes City, TX
I just built a new 30'X40' shop and purchased this Craftsman Filter\Regulator for my Ingersoll Rand Air Compressor. And the first day I hooked up this junk it leaked & the **** on top to regulate the air pressure is cheap made. I tried to fix it so it would not leak air, but had no luck. I tried taking it back to Sears where I purchased it and they would not take it back or exchange it since I did not have my reciept, and I just purchased this 2 weeks prior to installing it in my shop, So don't believe that all Craftsman is lifetime warranty, because they will find any excuse to not replace there junk that is made in China & not the US. Even though Craftsman is only sold by Sears they still would not exchange it. So I will never buy another Craftsman product again. Sears quality and service sucks and is not the same as is used to be years ago.
Just what we needed, good heavy duty, mounted on the wall near the air compressor. Easy to hook up. would definitely buy again. Works great with my Craftsman air compressor.
Idaho Falls, ID
This regulator is rated up to 175 PSI. I keep my air compressor at 150 PSI I have had the plastic bowl crack 3 times on me. Not sure if it was just a bad lot or if it is a known issue. Other than that it seems to get the job done.
The reviewer indicated they are affiliated with this product.
Only expected a pressure regulator to allow me to control pressure. It failed. Difficult to set it at the 90 pounds I needed from my 60 gallon tank compressor. Pressure fluctuated wildly once set. Lucky it did not blow out my tool, but made sanding diffucult. The port cap for the Guage was glued tight, the soft metal was not strong enough to overcome the seal and therefore I was stuck with the Guage on the wrong side for my application. When using the blower, the air blast was noticeably wetter than without the built in filter. In short it failed miserably. Lucky it did so immediately giving me time to return it. I suppose in the interest of protecting my expensive tools, Ingersoll, snapon,... I should invest in a good regulator, filter and dryer.
I bought this less than a year ago, it's a piece of garbage on two accounts. 1. The regulator never worked consistently. I can't always regulate A/P without shutting off the air and unscrewing the regulator completely, re-seating it and then closing it up. 2. The polycarbonate bowl (water trap) cracked at the bottom where the drain valve is seated. If the drain seat was too tight, that's from the factory (China) and should be a covered item. The problem is they don't sell or stock the bowl separately. After getting the run-around using the phone, my solution was to buy the Husky regulator and swap out the bowls until I can replace the whole thing.
Most of my tools are Craftsman. I like them and they're affordable. But this product is a complete piece of junk. I'm on my fourth one in 8 months (can't find my receipt so I have to keep exchanging it) and I only use my compressor 1 to 2 times per week. The first one came out of the pkg broken, the second lasted a couple months before spewing water through my tools, the third one broke in two days and the fourth lasted a few days before spewing water. I just ordered a different one from Northern Tools so I can prime my car and keep my tools from being ruined. Doesn't Sears read these reviews?
- Free shipping! Orders $59 or more Offer ends 31-Jul-2014 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Extra Savings on select Tools! Sold by Sears. Offer ends 26-Jul-2014 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends 31-Dec-2014 See details.