Specifications & Dimensions
|General Warranty:||1 year|
|Item Weight (lbs.):||90.6|
|Lift & Jack Type:||Floor jacks|
|Maximum Height (in.):||17|
|Minimum Height (in.):||5.125|
|Lift Capacity:||3/4 ton|
|Wheels & Tires:|
|Wheels or Casters:||Yes|
|Materials & Finish:|
Ratings & Reviews
Keep your vehicles in top shape with the Motorcycle/ATV Jack.
The Craftsman Motorcycle/ATV Jack has a 1,500 pound lifting capacity, so strong it'll easily handle small vehicles like dirt bikes, jet skis and ATVs. The fast-action foot pump and 3-position locking mechanism makes it easy to raise your vehicle to one of three heights, up to 16-1/2 inches high. You can easily change a tire or get underneath for a quick tune-up, and once you're done, you can lower the jack smoothly with the precision-controlled foot release.
The Motorcycle/ATV Jack is a great addition to any shop or garage. It includes two ratcheting tie-dow straps to wrap around most vehicle frames that help prevent sudden crashes to the floor. When loaded, the adjustable locking screws and wheels improve stability and safety. But it will also roll easily on four durable casters, making it easy to position, easy to adjust and easy to store.
- Craftsman Motorcycle/ATV Jack features a wide-lifting capacity so you can get under and get it fixed right
- Designed to deliver the ideal lift with motorcycles, ATVs, tractors, personal watercraft and snowmobiles
- Swivel casters make it easy to move, position and transport
- Includes jack, handle, two tie-down straps, two adapter bars and manual
- Has a lift capacity of 1,500 pounds (1.5 tons)
- Can lift small vehicles up to up to 17-3/8 inches high
Added on July 26, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
West Lebanon, NH
After using this item about a dozen times the hydraulic ram (bottle jack) stopped working. I followed all the steps to change the oil, get the air out etc. with no luck. Then I searched the internet and determined this is a common problem with these jacks and that apparently its a real piece of junk. So... I went on the online chat to see about getting a replacement hydraulic ram. The person I chatted with told me that they do in fact sell replacements and that I needed to call the PARTS 800 number. Guess what I called the 800 number and was told that they do NOT sell replacement parts for this lift. No Im stuck with this piece of junk that doesn't work and no way to lift my bike. DONT BUY THIS JACK!!!! I know its tempting and you would think with a name like CRAFTSMAN it would be quality, but its NOT. Your better off with the cheap ************** Tools one in my opinion.
Fort Worth, TX
I guess it is no surprise that this is made in China. I knew that going in, I mean it was only $100 (give or take) when the nice ones are usually triple that. All my tools are made in USA or Germany because I have been hurt more than one time using China ****! There is very little assembly required but i will say putting it together let me see the shoddy paint job, horrible welds (welder was too hot), the bolts/screws that were already placed on the frame had to be tightened (could have ended badly had I not checked this), the nuts and bolts themselves seemed cheap, the locking mechanism relys heavily on some round stock that looks to be was hand cut with some bolt cutters and spot welded on. I still put my bike up on it and it did not break but I am currently looking for a better made American one. DISLIKES: China made... and everything that comes with that. LIKES: It lifted my Dyna, it looks pretty from 15 feet away, and easy to use.
the best investment a biker could own. A very practice piece of equipment. Prolongs life of the bike, and keeps it safe from accidental bumping and falling. Prevents scratches, dings, and dents. Glad I finally purchased one for myself.
South Bend, IN
This jack is well made, heavy duty a little shy on clearance for my ultra classic which is stock 2005, and height is right at 5" from floor to frame while on jiffy stand. Jack minimum height is 5.12" which is to tight to slide it in on the stand side. Remedy slide the jack in from opposite side it goes almost all the way once it barely touches the frame at the jiffy stand side, stand the bike up finish pushing the jack threw effortlessly. the jack is now tight and will balance the bike by its self, jack up to desired height and lock the safety pins in place Excellent price and Quality.
Bought this lift because of the way the surface mates up to the bike. Other lifts were in contact with the kick stand and this lift allows the kick stand to be positioned between the lift surface. Works great for medium weight bike. Screw down stops add stability along with tie-downs. Use it a lot.
I purchased this as a Christmas gift for my husband who is doing some work on his motorcycle over the winter months. It assembled quickly, less than 1 hour and seems to be made of quality materials. He has already used it several times and has been quite pleased with the performance and quality of the jack.
I bought this jack after using the same jack that a friend had and had for over 8 years. So I bought my own, I have had it two years now and I love it. It works great. And is built very strong and heavy. I paid $79.99 witch is about what ************** sells there's for. Might come down the same assemble line but it say's "Craftsman" on it. Lol And I can get parts for the Craftsman if ever needed.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends 31-Dec-2015 See details.
- Free shipping! Orders $59 or more Offer ends 31-Dec-2015 See details.
- Get Quarter ct tw Diamond Earrings for $24.99 with any storewide purchase of $19.99 or more! Offer ends 31-May-2015 See details.