Share This Page Print

 00919864000-1
Enlarge Image

Craftsman Professional  1/2 in. Impact Wrench

  Item#  00919864000 | Model#  19864
Close

Create a Review

 
 
 Rating 4.5 | 14 Reviews | Write a review
Reg Price: $179.99
Savings: $18.00
$161.99
  • Temporarily Unavailable
I Own This Add to List
 

Specifications & Dimensions

Dimensions and Weight:
Item Weight (lbs.): 4.5 lbs.
Overall Dimensions: 7 in. length
Product Overview:
Reversibility: Yes
Housing Material: Cast aluminum

Overview

Ratings & Reviews

Special

Projects

Product Description

Lightweight composite impact provides over 700 ft./lbs. of bolt-busting torque. Hard-hitting, oil-lubricated Dynapact pin. Clutch hammer mechanism. Combined forward/reverse and regulator.

  • Composite motor housing
  • Cast aluminum hammer case
  • Contoured ergonomic handle grip
  • 5.5 average SCFM

This product is:
  • Available for Gift Wrap
This product comes with:

Added on February 16, 2009

 

Overall, others give this:

14 Reviews Write a review
10 Reviewers (71.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
1stars
(0)

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise6 found this helpful
Jeff
Oct 6 , 2006
A co-worker of mine uses one of these.....
I am a mold setter in an injection molding plant. One of our primary tools is the impact gun. Many of us have been supplying our own impacts, because the company impacts are AWFUL! They are not particularly powerful, are trouble-prone and seem to weigh a TON. Myself, I got an Ingersoll-Rand 2135Ti (through Sears), and am VERY satisfied with it. The guy I work with most of the time got himself one of these (Craftsman #19864). I have used his impact on several occasions, and it is very good too. Not quite as powerful as my IR going forward, but about as powerful in reverse. It is also fairly light and very well balanced. Very little vibration and kinda quiet as well. I also like the finger-groove grip. Very comfortable to use. This co-worker of mine has had and used his Craftsman for about five months of very rough usage, and it is still going strong. The (about) $180 price tag is certainly attractive. About $200 less than those company impacts, and it is still a good bit better. Sure, I still prefer my IR, but this Craftsman is now on my list of very good impacts. ;)
Criticism2 found this helpful
bah185
Oct 20 , 2007
Not what I'd expect
After 3-4 months of use, and oiling it daily like the instructions said, the hammer mechanism broke. The pins inside the transmission sheared right off. It had decent power, while it worked.
 

Tinker53

Muskogee, OK

Jan 26 , 2012
Overall
Can't live without it!

I am a do-it-yourselfer! I have been a Craftsman fanatic since the late sixties. This Craftsman Professional 1/2 in. Impact Wrench has made so many jobs a breeze. It is efficient and well-designed. It has saved the torturous task of ratcheting with a manual wrench, let alone, the physical demands. The power it delivers is awesome. And the timesaving is just what the doctor ordered.

Combined with any of Craftsman's 1/2 in. sockets sets, preferably impact grade, this impact wrench becomes an all-out must for so many tasks, such as: changing a tire, engine repair, construction projects, auto body repair, farm equipment repairs, the list is endless.

 

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

sandy765

Minot, ND

Nov 18 , 2011
via sears.com
Overall
Craftsman Professional 1/2 in. Impact Wrench

I am a truck driver and I use an impact wrench often for changing tires. (my loader operator runs into my tires a lot.)

The one I had was not a craftsman, but when it was stolen, I baught the Craftsman. I am very pleased with it. I works better than my old high dollar one. Haven't had it slip on me once and I love the replacement guarantee that Sears and Craftsman offer. I also since have purchased numerous other Craftsman tools and am extremely pleased with their performance. I haven't had the unfortunate opportunity to utilize the replacement guarantee, and that speaks volumes for me.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

ssjm3

Hawthorne, NJ

Sep 15 , 2010
Overall
this is a must in any tool box

i have this impact gun in my tool box i have used it several times doing my deck and it was there when i had a flat tire on my van its a life saver any good tool person has to have this in his or hers tool box  it not that heavy and paired with the right compressor and hose line your set for life

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

LostCajun

Dallas, TX

Feb 2 , 2009
Overall
Can't beat it.

I researched the web for a 1/2" impact wrench that would do any job for a reasonable price. There are cheaper ones out there, but they may not be able to loosen your bolt/nut. This baby sings. The reverse torque is awesome. The forward torque is adjustable. It performs. One caution. Craftsman makes more than one "Craftsman Professional 1/2 in. Impact Wrench". Be sure you get this one. It's better than the other(s). Sears item# 00919864000 Mfr. model# 19864. One anecdote. I was removing the flywheel nut from a 1988 CRX. I borrowed 3 wrenches from friends (all 1/2" impact wrenches). They just hammered and hammered, but couldn't break the nut loose. (Blew and Blew and couldn't blow the house down). This guy broke it loose in 2 seconds flat (or less, maybe...I was expecting to sit and hammer for a while but it almost immediately broke loose).


Helpful
(4)
Not Helpful
(0)
Flag this Review

LostCajun

Dallas, TX

Feb 2 , 2009
via sears.com
Overall
Can't beat it.

I researched the web for a 1/2" impact wrench that would do any job for a reasonable price. There are cheaper ones out there, but they may not be able to loosen your bolt/nut. This baby sings. The reverse torque is awesome. The forward torque is adjustable. It performs. One caution. Craftsman makes more than one "Craftsman Professional 1/2 in. Impact Wrench". Be sure you get this one. It's better than the other(s). Sears item# 00919864000 Mfr. model# 19864. One anecdote. I was removing the flywheel nut from a 1988 CRX. I borrowed 3 wrenches from friends (all 1/2" impact wrenches). They just hammered and hammered, but couldn't break the nut loose. (Blew and Blew and couldn't blow the house down). This guy broke it loose in 2 seconds flat (or less, maybe...I was expecting to sit and hammer for a while but it almost immediately broke loose).

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review

IndyMotoGP

indy, in

Dec 19 , 2008
via sears.com
Overall
great power

I got the impact after trying to loosen axle nuts on a civic. The impact (also craftsman) that came with the compressor wouldn't do the job. I tried using a breaker bar with a long cheater bar and ended up making a trip to sears to replace the breaker bar. I couldn't believe how fast it broke the nut lose. The only reason I didn't rate it five stars is because I haven't had it long enough to determine how reliable it is.

I would recommend this product to a friend.

Helpful
(3)
Not Helpful
(0)
Flag this Review

firemanchad

, Middle TN

Nov 9 , 2008
via sears.com
Overall
19864 impact

I bought this impact over 2 years ago. I have been very impressed with the reverse power. I had a friend that could not break an axle nut off his acura and asked me to come over to see what I could do. He had a 6ft pipe and a socket and could not break it loose. I used a small portable tank and my impact and had it off in under 30 seconds. Great product and I cant say I oil it every time. Only thing I would like to see is a nice rubber cover made for it. Now it is time for me to put a seal in the trigger as it is finally loosing air. I use this 4-5 time a week, building rotary motors, removing and installing them. Chad - Middle TN

I would recommend this product to a friend.

Helpful
(5)
Not Helpful
(0)
Flag this Review

Pfiefletech

, nd

Oct 9 , 2008
via sears.com
Overall
Good gun

This gun is made for craftsmen by florida pnuematic. Bought this gun used from a diesel mechanic. 4 years old now and can still break nuts and bolts free. Took lugnuts off of a school bus that the shop 3/4 could't do.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review

Theworker

, Unknown

Dec 26 , 2007
via sears.com
Overall
Another good Craftsman product

Perhaps one of the most discreet models of Craftsman. An excelent tool. A plenty of power. Very well balanced and very little vibration. Is in addition quiet.

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review

bah185

, NW Indiana

Oct 20 , 2007
via sears.com
Overall
Not what I'd expect

After 3-4 months of use, and oiling it daily like the instructions said, the hammer mechanism broke. The pins inside the transmission sheared right off. It had decent power, while it worked.


Helpful
(2)
Not Helpful
(0)
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   01-Nov-2014 See details.
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends   31-Dec-2014 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2014 See details.
  • Online Only! Extra Savings on select tools Sold by Sears! Discount reflected in price shown. Offer ends   27-Sep-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x