|Maixmum Dado Diameter (in):||6|
|Maximum Cut Depth at 45° (in):||2.375|
|Maximum Cut Depth at 90° (in):||3.25|
|Maximum Dado Width (in.):||0.25|
|Table Height From Floor (In):||18|
|Fence Type - Open text:||Rip|
|General Warranty:||1 year|
|Item Weight (lbs.):||61|
|Package Contents:||Blade, Miter Gauge, Push Block, Blade Wrench, Rip Fence|
|Table Saw Style:||Contractor Saw|
|Materials & Finishes:|
|Cord Length (ft.):||6|
|Cord Management:||Cord retention system|
|Blade Diameter (In):||10|
|Arbor Speed (RPM):||5000|
|Guides & Instructions:|
|Arbor Size:||5/8 in.|
|Table Material:||Die cast aluminum|
|Table Tilt Range:||0-45 deg.|
|Left Rip Capacity:||7 in.|
|Maximum Cut Depth:||3.25|
|Right Rip Capacity:||24 in.|
|Assembly Required:||Assembly Required|
Ratings & Reviews
Get High-Powered Cutting Action with 10" Professional Jobsite Saw
The Craftsman 15 amp 10" professional jobsite saw delivers all the power of a full-size table saw in a compact, portable design. The saw has a telescoping handle, six-inch wheels, and on-board storage that makes transporting it quick and easy. The toolless blade guard gives extra versatility and safety when making cuts. A 36-tooth, carbide-tipped blade makes smooth cuts and provides durability for long life.
The 10" professional jobsite saw has a steel tubing roll cage wrapped around the cabinet housing for added protection. The oversized blade height adds more versatility and there is a bevel adjustment knob. Rear outfeed support smoothes out ripping operations. The toolless blade guard system includes a multiposition riving knife/spreader. There is a right sliding table extension that opens to a 24 inch rip capacity. The self-aligning rip fence clamps on front and rear of table for accuracy, so whether you're ripping ply or cross-cutting timber, you get the job done right.
- Craftsman Professional 15 amp 10" Professional Jobsite Saw provides full strength cutting action in a compact size
- Telescoping handle extends and locks in place for transportation
- On-board storage for blade, wrenches, push stick and miter gauge
- 36-Tooth, carbide-tipped blade for smooth cutting action
- 3/4" T-slot miter gauge grooves both sides
- Steel tubing protects cabinet housing
- Bevel adjustment knob
- Rear outfeed support for ripping
- Toolless blade guard with multiposition riving knife/spreader
- Self-aligning rip fence clamps on front and rear
- 2-1/2 dust vacuum port
- Weighs 61 lbs.
- Some assembly is required
Added on July 26, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
Let me start by saying that I am not a table saw officionado. I much prefer a radial arm saw for its versatility. But, there are times when a small table saw fills the bill, espcially when you are lugging it around to job sites. That's exactly what this saw is made for and does well. Most job site saws are larger and have attached stands. This is fine if all your jobs are accessable by flat smooth surfaces, but they seldom are. The added wieght of an attached stand requires two people to carry up stairs or across a field. This saw can be carried or wheeled. It would be nice if a separate folding stand were available for this, but there doesn't seem to be. It does work fairly well to just bolt it to a pair of saw horses.
This saw begs comparison to the similar DeWalt mini job site saw also sold by Sears. The Craftsman saw has many advantages: lower price, greater rip capacity, a real metal miter guage, a side and outfeed extention, wheels, and a telescoping handle. The DeWalt has a rack and pinion fence mechanism that insures a parallel fence and is a little lighter. It also has a full thickness blade insert and available stand. It was an easy choice for me. I refuse to pay Dewalt prices for a saw with a plastic miter guage. And besides, I'm still mad at Dewalt for not making there excellent radial arm saws anymore.
This saw is made in Taiwan by a company that also makes saws for Ridgid whose jobsite saw is top rated by a leading consumer magazine. Ridgid actually sold a cosmetically altered version of this saw as a special edition of a while. My saw came pretty well set up right out of the box. I made slight adjustments to the blade heeling, the rip fence, and the riving knife. These adjustments are all easily accessible. The heeling adjustment is particularly easy because of a eccentric bolt which allow precision changes. The guard is the best I have ever experience on a table saw. The splitter is hefty and easily adjustable in three different dimensions. In the past I've never been able to get a good adjustment on cheap splitters so I didn't use them. I may actually use this one. It has tooless, modular kickback pawls and guard. Much heftier than what I am used to on inexpensive saws. One compaint is that the blade insert is not thick enough to allow replacement by zero clearance inserts. Also, it only takes a 1/2" dado. You need 3/4" for shelf inlets. It has a dust collection shroud around the blade an outlet tube. Oddly enough it doesn't come with a bag. I bought a Bosch bag and it works fine. Most of the dust--not all--goes in the bag. I would collect more with a vacuum, but who wants to hassle with that. The fence works well. The miter guage is sturdy metal but a little loose in the slot. The table extension lock was a little weak when I got it, but was easily adjusted with a turnbuckle under the table. The table is almost perfectly flat with a very slight roll-off at the rear. I don't care so much for the painted table, but I suppose machining it would add a lot to the price.
I bought this to replace another Craftsman saw in this price range. The other was much flimsier, made by another supplier, and not up to professional standards at all, but then it wasn't marketed as such. I think this saw pretty well lives up the "Professional" designation. I used to repair typewriters, so I know machines pretty well. I think this is quite well made compared to much of the junk that is on the market today. I've been a professional builder for several years, and I like this saw. I'd give it a 4.5 if I could. Not quite 5 because of the drawbacks I have mentioned.
This is what ive found to help improve my use of the saw. After buying 2 arbor nuts from sears for a ridiculous price of $12 each plus shipping (twice) I found the rigid/ryobi arbor nut for this saw. I think it came from mowtown or something. But, Craftsman rebranded the saw or something but i think its actually a rigid design . Their nut isnt flange and so far its been much easier to work with. I made sure to jam nut the hand wheel so it would spin but not unscrew itself. I hate the fence to say the least. Very close to the top of my to do list is to create a new top and fence system.
Oklahoma City, OK
As other reviews state, the fence could be better though this saw is more than adequate for any number of jobs. A few minor adjustments out of the box and the saw runs perfect, though I did upgrade the blade as many reviews suggest.the motor runs strong and the expanding rail capacity make for a surprisingly versatile saw given the small size.4 stars only because of the fence.
Holly Springs, NC
Previously reviewed at 3 stars. After 2+ years of use, saw has held up very well. If you can get this on sale, would buy it. 1. Pull Out Rip tray is great for larger boards, competition doesn't offer this. 2. Telescopic handle and wheels are invaluable to wheeling both indoors and outside without lifting saw 3. Saw blade has remained sharp, even after two years, clean cuts. 4. Easy cleaning on dust assembly and cleaning sides of blade Overall, an outstanding saw, glad I purchased. no complaints.
Love this saw... got it for an unbeatable price. Out of the box and ready to cut in a very short amount of time. Rip fence ruler needed to be zeroed, everything else arrived square and true. The included blade has been great so far; it's made clean and straight cuts thru all thicknesses of stock and the motor powers thru just about anything. My only critique is that I'd like to see a suitable gravity stand come with this saw. The model up and the model down both have attached stands; while the wheels and dolly frame on this table saw are rock solid, you've still got to mount it on some saw horses and a sheet of ply at a work site. Overall I'd definitely recommend this table saw.
Long Valley, NJ
I like this saw. The fence is much better then my old saw which was about the same size. I needed a job site saw as I just dont have the room in my garage for a full size one. This fit the bill just right. If I have to find anything wrong with it, I dont like the outfeed table as its a little weak. It can't handle holding 3/4 in plywood. Otherwise this saw is great and has made some nice cuts.
San Antonio, TX
I have a small shop and I needed a compact, powerful table saw with 3/4" miter grooves, dado capable, sawdust pickup, and expandable table. I took off the wheels and mounted it on a hard stand with lockable wheels. I use Kreg miter system and this fence is fine and accurate for my needs. The DeWalt 745 does not take dado's, so this was a great deal at $300.
- Free shipping! Orders $59 or more Offer ends 01-Nov-2014 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends 31-Dec-2014 See details.