Specifications & Dimensions
|Arbor Size:||5/8 in.|
|General Warranty:||1 year|
|Item Weight (lbs.):||204|
|Package Contents:||Saw, Stand, Blade, Arbor Mounted Laser, and Owners Manual|
|Portability:||Can be relocated|
|Saw or Accessory Type:||Radial Arm Saw|
|Cord Length (ft.):||6|
|Blade Diameter (In):||10|
Ratings & Reviews
Radial Arm Saw: Adaptation and Accuracy in One Tool
This Craftsman radial arm saw delivers accurate rips, cross cuts and more for decades to come. A solid machine with tons of potential, this saw not only provides clean miters, bevels and slots, but integrates attachments like dado blades, buffing wheels and more to help you cover dozens of jobs perfectly. Built on a sturdy, broad-standing base and featuring a wide working surface, this saw accommodates large and small work pieces easily, so whether you’re cutting precise cross sections for inlays, or ripping full sheets of plywood, you have a stable surface for fast, accurate work any time.
Powered by a potent three horse power motor and sliding smoothly on an extra long turret arm, this saw rips sheets up to 15.5 inches wide and makes cross cuts up to 29 inches deep, so no matter the specs, you’ll have a cut you can trust. And even if you’re moving fast, this Radial Arm Saw features a clearly visible Laser Trac™ so you can make every bevel, cross-cut and miter to get the results you want. Designed for speed, accuracy and versatility, this saw is the perfect addition to any shop, big or small, roll it in and flip it on and get solid performance built Craftsman tough, for years of sharp cuts and smooth finishes.
- Radial arm saw includes 10 in. 40T carbide blade
- The Craftsman radial arm saw gives depth accurate rips and cross cuts with more support surface that competing tools
- Delta 33-400 14 in. Radial Arm offers extra cutting capacity with the extra-long turret arm
- Laser Trac™ technology assists in aligning the blade to the work piece
- 3 HP maximum deviation Control Cut™ feed rate motor
- Sturdy work surface accommodates large work pieces
- Built-in accessory shaft accepts a wide variety of optional accessories
- Automatic blade brake stops blade in seconds increasing work safety
Added on May 13, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
I purchased this saw to replace a 20 year old Sears Radial Arm Saw that served me well all those years. I was prepared for the set-up time required since I use this saw as part of my equipment inventory for making professional custom cabinets. I am usually very annul about making every specification set up as close to perfect as possible. After the appropriate assembly of this saw which takes about 2 hours from the time the box is open I started the set-up process. The 1st and most important step is to insure that all the play is removed from the arm to the column. This step is the basis for all other adjustments. This could not be accomplished on my unit. After playing with it for over 5 hours I gave up and called Sears service. The technician tried for additional 3 hours before giving up and thought it might be a casting or manufacturing problem. Parts were ordered that would have taken another month to repair. I called to get the unit replaced with a new one. The return was painless however, I still have to wait two weeks for the replacement. I paid for home delivery service to get the unit here faster but here it is a month later and I still don't have a working saw. The jury is still out pending the outcome of the new unit. I will update this review at that time. For a "Professional" saw that cost almost $1000, I was very disappointed in its quality and apparent instability of the adjustments.
It is beyond me how anyone could think this is a great saw. You would have to have bought your tools from *********. It is useless. It won't cut a square corner. The thing wobbles all over the table, the arm is sloppy and cannot be adjusted easily. The rails on the arm are not even parallel.
This is a good high quality Radial Saw for the hobbyist on a limited budget. It replaced my 43 year old Black & Decker that I bought new in 1970. This Craftsman brought me into the space age by comparison. The saw did NOT come in proper adjusted. As shipped the adjustments were close - just not precise enough for me. Buy this saw if you want a good quality hobbyist saw - take the time to do a proper setup, and you'll be a ripping happy. Nifty
Kansas City, MO
I have had this saw for a few years about 4 works good you just have to spend time setting it up and make sure you tighten the alien's on the lift tight as you fell they won't strip out the threads then it works perfect. Its got plenty of power. but keep in mind BLADE is the factor in this,use the right blade for the job your doing. I even cut non Ferris metal with mine. Rips cross cut angled beveled hard woods, hold a line and will cut straight even after changing setups. Make sure you square is good the product setup guide shows you how to do this, I had an old square that was real bad I didn't know just how bad until I did this test. Needless to say in the trash it went. This is what everyone used before we had miter saws, and they worked then and do today. This is also safer to use for crosscut then a table saw.
This is by far the worst shop saw I have ever owned or used. In 1978, I purchased a Craftsman 10? Radial Arm Saw and used it for 32 yrs. It was a very good saw, accurate and always held its alignments,this new saw (Model 22010), will not. The alignment must be readjusted every time the saw arm is bumped, moved or the cut angle changed. Sears sent a tech, under warranty, to repair the saw but the parts he needed are no longer available and no longer stocked by Sears. This saw has been misrepresented by Sears Craftsman ? The owner?s manual said I would get years of service out of this saw, it was deficient out of the box and couldn't make a year. It came with a one year repair warranty that Sears cannot honor because critical repair parts are no longer available for my less than a year old saw. Sears says no refund and no repair but I can trade for an identical saw with the same inherent problems. If you want a quality shop saw to build cabinets and/or furniture, look at somthing else.
Not sure it should be called Professional, but it is a good saw. It does require a bit of tweaking but it isn't too difficult and the instructions are pretty clear. It isn't Industrial grade but the price doesn't reflect that either. I have used it for home-type projects and it works fine for me.
Love this saw, very easy to change the saws angle for cutting miters. And I really love the cutting control so you can only pull the saw out so fast and that speed is adjustable and the saw will not come at you with this control unit.
San Dimas, CA