Craftsman Professional  40 in. Creeper

Casters loosened up like everybody elses'. Just wrenched them tight w/ my Craftsman wrench. Tires always loose air. Don't Slime the tubes - they'll disintergate. Now one of the cheap plastic wheels broke and the tire debeaded & tube popped. Let's see how good the warranty is. It rolls over all obstacles great but can roll away when you're pushing hard on something under the chitty. Needs brakes. Best creeper I've ever owned in spite of it's shortcomings and I've had a bunch. Hope this was helpful.

Purchased 2 creepers for heavy duty use at salvage yard. Immediately one wheel came off but we feel it just wasn't tightened completely. The large wheels make it much easier to get under the cars to pull parts and do not get"stuck" on floor dry, rocks and other automotive grease and such that may have gotten on the ground. The guys love them and I will purchase more after we see over time how they hold up. A little expensive but if they meet our needs they are well worth it.

Purchased 2 creepers for heavy duty use at salvage yard. Immediately one wheel came off but we feel it just wasn't tightened completely. The large wheels make it much easier to get under the cars to pull parts and do not get"stuck" on floor dry, rocks and other automotive grease and such that may have gotten on the ground. The guys love them and I will purchase more after we see over time how they hold up. A little expensive but if they meet our needs they are well worth it.

I bought this unit after having two other very expensive units fail as I weigh 430 #'s. EXELENT product! Only problem I've had with unit is the nuts atop the wheels loosened up after a few hours use. Have to lift the race car up higher as the creeper is taller.

THIS CREEPER ROLLS OUTSTANDING. IN AND OUT OF UN EVEN PAVEMENT IS NO PROBLEM. I NEVER MEASURED IT BUT IT DOES RIDE HIGHER THAN THE AVERAGE CREEPER. EVEN SO I HAVE NO PROBLEM GETTING UNDER A SCHOOL BUS OR TRUCK, AND IM A BIT OVERWEIGHT. MANY OF THE OTHER GUYS I WORK WITH LIKE IT TOO.THEY HAVE SNAP-ON CREEPERS AND MAC-TOOLS. THERE TIRES ARE AS TALL AS THE SEARS BUT ARE FLAT, THEY DO NOT ROLL AS EASY OR TURN AS WELL. THIS CREEPER ROLLS AND TURNS VERY WELL. THE ONLY DOWN SIDE I HAVE WITH CREEPER IS IT NEEDS BRAKES. IF YOU ARE ON A GRADED SURFACE IT WILL ROLL AWAY FROM YOU. I INSPECT AT LEAST 500 SCHOOL BUSSES EVERY QUARTER. I NEVER HAD A PROBLEM WITH THIS CREEPER. JUST PUT 80 PSI IN THE TIRES AND CHECK THE TIGHTNESS OF THE WHEELS AND YOU ARE SET

Dont know if above reviewer actually purchased this creeper cuz it does have 6" casters, actually too high at 9" tops, excellent padding and casters, but mine was shipped twisted, not sure if shippers handling or bad weld, so cant recommend at this point. but the advertised height of 5" is a misprint , the deck ht. is over 6".

Dont know if above reviewer actually purchased this creeper cuz it does have 6" casters, actually too high at 9" tops, excellent padding and casters, but mine was shipped twisted, not sure if shippers handling or bad weld, so cant recommend at this point. but the advertised height of 5" is a misprint , the deck ht. is over 6".

Good creeper, like the larger wheels - however they are not 6" wheels - more like 4". Whoever wrote the description needs to do their math ... How can a creeper with 6" wheels only be 5" high?