Craftsman Professional 60 Gallon Air Compressor, 3.1 RHP, Vertical Tank, Oil LubeItem# 00916476000 | Model# WLB3106016
|Dimensions and Weight:|
|Item Weight (lbs.):||234|
|Air Outlet Size:||3/8 in.|
|Duty Cycle (%):||75%|
|Electrical Phase Type:||Single phase|
|General Warranty:||2 year limited|
|Lubrication Type:||Oil lubricated|
|Package Contents:||Air Compressor|
|Electric Rating:||230V AC|
|Safety Shut Off:||No|
|Number of Wheels:||0|
|Low Oil Shutdown:||No|
|Maximum Operating Pressure (psi.):||150|
|Motor Drive:||Belt driven|
|Motor Voltage:||230V AC|
|SCFM Delivery At 40 psi:||12.9|
|SCFM Delivery At 90 psi:||11.3|
|Compressor Tank Capacity (gal.):||60|
|Number of Pumps:||1|
|Pump Life (hrs.):||1000|
|Pump Type:||Oil lubricated|
Ratings & Reviews
Craftsman's 60-Gallon Vertical Air Compressor is Well-Suited for Your Workshop
The Craftsman Professional 60-gallon air compressor is great for jobs of all sizes. This air compressor is the cornerstone of any serious shop. Designed to deliver consistent pressure from a vast reservoir, this machine is perfect for powering paint sprayers, air wrenches, nailers, grinders and more. A powerful 3.1HP motor at 230-volts with fast cooling cast-iron cylinders and a single-stage aluminum oil pump to recharges pressure rapidly so you can keep working.
This 60-gallon vertical air compressor comes fully assembled and is designed for years of solid service with a proper hardwire install. Potent, powerful and built to last, with the kind of capacity that lets you swap between jobs all day long, this compressor will help you grind, paint, drive, wrench, blast and sand.
- The Craftsman Professional 60-gallon air compressor provides tons of air storage, which allows you to work for longer lengths of time
- A combination of muscle and capacity at a price that just makes sense
- Powered by heavy-duty 3.1 HP running induction motor, this compressor fills to capacity fast
- 230-volts ensures you've got the power to get the job done
- Aluminum single-stage oil lube pump with cast iron cylinders will run smooth and cool for years
- Tank pressure gauge and on/off switch give you clear information and keep this machine simple to operate. (Max PSI Tank Pressure: 150)
- Comes with a one-year limited warranty
Added on October 21, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
The electric motor on my 27 year old Craftsman 20 gall. 3 hp just died so I decided rather than replace the motor, to get something with more air volume. The only problem I had with the pld unit was an oil leak that developed in the compressor oil pan because of porosity which I took apart and repaired with epoxy 20 years ago, since the warranty had expired. Well, the best deal going was the 60 gallon, 3 h.p. vertical for 489.00 at my local Sears. It was packaged well and did not have any obvious damage or oil leakage. I hooked up the required 220 volt power, leveled the base and installed the appropriate fittings in the tank. According to the directions, the compressor pump was pre-filled with oil and I only had to perform the required break in period for 30 minutes, drain, refill etc... Experience told me to check the oil and I am very glad I did. The oil didn't even register on the dipstick and I needed to add approx. 10 oz of oil to the compressor head. This unit wouldn't of lasted very long being this low on oil. After finding this, I proceeded to check every nut and bolt, fitting etc... to make sure nothing else was compromised. Where is the quality assurance at the factory? Sears should take note and revamp inspection process ASAP. People expect brand new components to work properly and don't want any hassels right from the start! Overall the unit now works great and I look forward to many years of service.
I do a lot of hobby work out of my home and I have four smaller compressors but none of them could do blasting that I wanted to do so I had been waiting and looking and I finally found one I could afford that would do what I needed it to do.
I'm not saying its junk, but they sure aren't as good as they used to be. Every tool that I have is Craftsman, and I have a lot. I bought a compressor, 15 years ago from Sears. 30 gallon, 5 H.P. I was thinking about getting a new one, but I think my old one will out last a new one, especially the oil free compressors. How is the pump going to hold up without using oil? Can't see it. I still buy all of my hand tools from Sears, but I 'm not letting go of my 15 year old compressor, and it has more H.P.
West Branch, MI
This item is quiet but powerful. It was easy to set up as I had to create a new plug for it. I left it on the pallet it came on and it's set up and ready to go. But the quietness is key!
Dry Ridge, KY
I bought this item for my husband. He has been needing one. It was easy for my husband to wire it up and to get the compressor going. To my surprise the compressor was very quite! I can hardly hear it in the house! It has enough power though for my husband to do all the mechincal work he needs to do!
The only thing was waiting on the elec. To wire up. But it was worth the money and I shopped all round. It was just as good as the rest but a lot cheaper. It works great for us and very happy.
It doesn't come plumbed or wired out, but bigger units rarely do. I really appreciate this unit. I think it covers one man continuous use okay. It does not let me down in any way. The sales price break I received on the unit sealed the deal for me, I was looking at lower quality units for less than a hundred dollars difference. I like the cast iron pump, that was a selling feature that helped me decide on it. Unless I go big time pro, this unit will do anything for me from plasma, sanding, to paint. What else do I need besides a few impact and air ratchet operations.
Newport Beach, CA