Share This Page Print

 spin_prod_740003812
Enlarge Image

Craftsman  Universal Clamping Accessory

  Item#  00916494000 | Model#  16494
Close

Create a Review

 
 
 Rating 4.0 | 13 Reviews | Write a review
Reg Price: $29.99
Savings: $3.90
$26.09
I Own This Add to List
 

Specifications & Dimensions

Product Overview:
Type: Miter saw stands

Overview

Ratings & Reviews

Special

Projects

Product Description

Universal Clamping Accessory Adjusts To Accommodate Your Tools

If your clamping accessory stays steady under heavy pressure, then you probably have the Craftsman universal clamping accessory. If not, this accessory is a great addition to make to your tool set. It is built to hold and remove your miter saws and a wide range of other bench top tools too simply and quickly. Tools can be easily mounted onto it and removed just as fast thanks to its advanced quick release construction.

The universal clamping accessory is versatile to accommodate a lot of your tools. Slotted brackets come fitted with slotted cross supports that can be adjusted to fit your collection of miter saws and bench top equipment. If you have 10 and 12-inch miter saws, you're in luck because it will fit them comfortably. It gives you three bolt configurations and the maximum opening size for bolts is an impressive 15 x 17 inches. Both durable and versatile, your garage or shop will be lost without it.

  • Handle your tools with care with this reliable and versatile Craftsman universal clamping accessory
  • Design mounts your miter saws and other bench top tools easily and fits them comfortably
  • Quick release construction makes removing tools effortless
  • Features slotted brackets with slotted cross supports you can adjust to make it compatible with a wider range of miter saws and bench top tools
  • Ideal for mounting and removing 10 and 12-inch miter saws
  • Has three bolt configurations and a maximum opening bolt size of 15 x 17 inches
  • It can fit 16490, 16491 and 16492 stands
  • Construction is tough and steady for high performance and durability

This product comes with:

Added on September 21, 2012

 

Overall, others give this:

13 Reviews Write a review
9 Reviewers (69.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise4 found this helpful
fixNmowers
Dec 31 , 2012
Great Tool Clamp....
Originally used for my Craftsman 10" miter saw, I discovered other uses for it. I mounted 3/4" plywood and predrilled a few holes and this tool stand clamp can use anchor my 10" drill press, and 16" scroll saw. Attatches quickly and anchors securely and makes my stand more versital in the limited space inmy shop. I would recommend this tool for all of my buddies
Criticism2 found this helpful
Bigwhitemike468
Feb 11 , 2014
Fatal Design Flaw - Buy At Your Own Risk
Great product concept: simple and attractive (although not necessarily better than competitors, somewhat cheaper). However, it is the cliched "cheap plastic" cost-cutting that makes this mostly worthless - the handle/latching arm is a single molded plastic piece, the far end of which is an eyelet through which a bolt is run. The plastic eyelet is too thin and will likely crack through upon first use... or perhaps will already be split in the box! I purchased the deluxe miter stand (which comes with one), which was apparently/luckily (or unluckily, as it turns out) a good copy that has functioned as intended. I got one additional clamp, which split upon first use. I exchanged it, got home and saw it was cracked prior to even installing it. Ordered another online (to return the original while picking it up), shook the box (which was closed with yellow tape, indicating that it had been returned previously) to hear a loose piece rattling right in front of the stock guy who had handed it to me, then opened it to find the eyelet completely snapped in half on one handle, and cracked on the other. This means that the stock guys didn't even inspect the return and put it back on the floor as new/fully functional. I took my two broken clamps to the tool desk, showed the clerk the problem, and proceeded to open the two other boxes on the shelf. The first had the same cracked eyelet problem, the other appeared to be good. I returned the two, took the good copy, and begged the lady not to put the broken copies back on the shelf, but I'm pretty sure where that's where they will end up because nobody cares. I only took another one home because I already own and use the stand, otherwise it'd be game over.
 

CameronBarnes

Vancouver, WA

Jul 7 , 2014
via sears.com
Overall
poor design choice

My wife bought the miter saw stand for me on a black Friday sale a year and a half ago. I'm a general contractor so I use my saw stand quite often, which for this product is not a good thing. The cheap plastic handles have both been broke for quite some time now. The first one broke the third time I used it, it actually broke off in my hand when I was trying to set up my saw. The clamp part still worked with the little jagged nub that was left so I didn't bother returning it, that was a mistake. I used it with one broken handle for a while. However the other handle broke off completely to where the clamp wont even work. So I have the broken nub on one side (I tap this into clamping position with a scrap 2x4 or any other object since its a jagged piece of plastic that I have no desire to rip my hand open on) and nothing on the other. If they made the handles out of a stronger material they would have an outstanding stand to sell. I love everything else about the stand, it's great! The plastic handles have to be replaced though!!!


Helpful
(0)
Not Helpful
(0)
Flag this Review

HomeLove

Brentwood, TN

Feb 25 , 2014
via sears.com
Overall
Just what I needed

This is just what I needed. I had purchased the miter saw stand that came with one of these in the kit that I attached to my miter saw. I wanted to be able to keep it permanently attached to the saw but also use the stand for my bench top drill press as well when needed. Works perfectly. Now I have two tools that I can switch out without going through the small hassle of removing the clamping base. It is well built and sturdy.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

Sailor_Boricua

Virginia Beach, VA

Feb 14 , 2014
via sears.com
Overall
Great addition for portable stand

Althought you have to be really careful with the plastic handles; the adaptability of this base to different bench-top power tools is worth the 5 stars. It is absolutely amazing. I have one on my 10" single bevel compound miter saw and one on my router bench. It works like a champ. I can release the miter saw from the stand and mount the router in no time. I recommend it!

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review

Bigwhitemike468

Shawnee, KS

Feb 11 , 2014
via sears.com
Overall
Fatal Design Flaw - Buy At Your Own Risk

Great product concept: simple and attractive (although not necessarily better than competitors, somewhat cheaper). However, it is the cliched "cheap plastic" cost-cutting that makes this mostly worthless - the handle/latching arm is a single molded plastic piece, the far end of which is an eyelet through which a bolt is run. The plastic eyelet is too thin and will likely crack through upon first use... or perhaps will already be split in the box! I purchased the deluxe miter stand (which comes with one), which was apparently/luckily (or unluckily, as it turns out) a good copy that has functioned as intended. I got one additional clamp, which split upon first use. I exchanged it, got home and saw it was cracked prior to even installing it. Ordered another online (to return the original while picking it up), shook the box (which was closed with yellow tape, indicating that it had been returned previously) to hear a loose piece rattling right in front of the stock guy who had handed it to me, then opened it to find the eyelet completely snapped in half on one handle, and cracked on the other. This means that the stock guys didn't even inspect the return and put it back on the floor as new/fully functional. I took my two broken clamps to the tool desk, showed the clerk the problem, and proceeded to open the two other boxes on the shelf. The first had the same cracked eyelet problem, the other appeared to be good. I returned the two, took the good copy, and begged the lady not to put the broken copies back on the shelf, but I'm pretty sure where that's where they will end up because nobody cares. I only took another one home because I already own and use the stand, otherwise it'd be game over.


Helpful
(2)
Not Helpful
(0)
Flag this Review

DeathMachine

Allen, TX

Feb 10 , 2014
via sears.com
Overall
Great product and guess what?

This thing is useful. And it fits the Ryobi stand too! I too have limited floor space so, an interchangeable system makes sense! Put one on the bottom of every bench tool and swap to stand as necessary.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

paidmydues

College Station, TX

Jan 23 , 2014
via sears.com
Overall
Great clamp

Great for use with compound miter saw. I also purchased one for my router table.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

3henry21

Bethel Island, CA

Oct 19 , 2013
via sears.com
Overall
Very useful and well made

I just bought three of these, with the one that came with the miter saw stand it makes a total of 4 that I have. My garage/shop has limited floor space for work benches or stationary tool stands. After seeing that the you could buy additional tool mounts for the saw stand it hit me like a load of bricks... I have a neat little system to use my miter saw stand for all of my bench top power tools. Depending on the what you're mounting to the clamping accessory, you can fit 2 or 3 of these side by side on the miter saw stand to have a multi tool station, or you can fashion a work bench top from 3/4" plywood, mount it to one of these accessories and turn the miter saw stand into a portable work bench. What you can use a miter saw stand for that uses these tool mounting fixtures is only limited by your imagination and weight capacity of the stand.


Helpful
(2)
Not Helpful
(0)
Flag this Review

oldflyman

Troy, MI

Apr 11 , 2013
via sears.com
Overall
Broke clamping arm

I tried to find the clamping arm with no success so I ordered the assembly. Call on phone and they were able to order me the individual clamping arm. I picked this assembly up and returned it immediately.


Helpful
(1)
Not Helpful
(1)
Flag this Review

campingspecial

Heidrick, KY

Feb 13 , 2013
via sears.com
Overall
great product

i received my first set with the stand as a gift . as soon as i used it i ordered 2 more sets. now i can change from miter saw, band saw, and scroll saw easily and fast.

I would recommend this product to a friend.

Helpful
(2)
Not Helpful
(0)
Flag this Review

fixNmowers

Odessa, TX

Dec 31 , 2012
via sears.com
Overall
Great Tool Clamp....

Originally used for my Craftsman 10" miter saw, I discovered other uses for it. I mounted 3/4" plywood and predrilled a few holes and this tool stand clamp can use anchor my 10" drill press, and 16" scroll saw. Attatches quickly and anchors securely and makes my stand more versital in the limited space inmy shop. I would recommend this tool for all of my buddies

I would recommend this product to a friend.

Helpful
(4)
Not Helpful
(0)
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   31-Jul-2014 See details.
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends   31-Dec-2014 See details.
  • Extra Savings on select Tools! Sold by Sears. Offer ends   26-Jul-2014 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends   31-Dec-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x