Specifications & Dimensions
|Dimensions and Weight:|
|Item Weight (lbs.):||0.56 lbs.|
Ratings & Reviews
This Universal Receiver from Craftsman upgrades most brands - including Genie®, Stanley®, Chamberlain®, Sears Craftsman® and others - to work with new 315MHz products like the Craftsman EntryEase Fingerprint Keyless Entry. The receiver easily plugs into an electrical outlet inside the garage and accepts a special private-coded signal from the Craftsman EntryEase Fingerprint Keypad (#53555), Keyless Entry Pad (#53754) and all Craftsman black button remote controls.
- Upgrades most brands, including Genie®, Stanley®, Chamberlain®, Craftsman®, and others
- Receiver accepts a special, private-coded signal from the remote control (not included), and operates the garage door opener
- Receiver plugs into a standard outlet, and wires easily to the garage door opener powerhead
- Receiver is compatible with Craftsman garage door opener remote controls with black buttons, or if the remote control has a 315 logo
- Not for use with garage door operators manufactured prior to 1993
- Available for Gift Wrap
Added on July 26, 2010
Overall, others give this:
Colorado Springs, CO
fairly simply to install on existing opening. ours was an 80s or 90s craftsman opener. simply wire on with the others. it did make it a bit hard to fit on with the old button. the downside is that you have to use an outlet. since i didnt have one in a good place for the button, i had to keep the other one wired up. it is nice now - both doors are on the same remotes! should be easy to work with any opener, in spite of the fact that one of the "highly qualified" sears employess basically told me that they were lying about it being universal.
fairly simply to install on existing opening. ours was an 80s or 90s craftsman opener. simply wire on with the others. it did make it a bit hard to fit on with the old button. the downside is that you have to use an outlet. since i didnt have one in a good place for the button, i had to keep the other one wired up.
it is nice now - both doors are on the same remotes!
should be easy to work with any opener, in spite of the fact that one of the "highly qualified" sears employess basically told me that they were lying about it being universal.
Only recently the receiver of our rather elderly garage door opening system had died. We purchased this new 315 MHZ Craftsman Universal Receiver on 10/17/09. Since we had no electrical outlet near the garage door, my husband installed one. This job actually took the longest. Once we plugged the receiver into the newly installed outlet, we programmed it. Voila, it worked immediately. Each of the three black button remote controls we had also purchased needed to be programmed individually. They too functioned right away. Keep in mind that only the black button remote controls work with this receiver. The receiver packaging shows in front two paper stars: Blue and yellow. When purchasing the compatible remote control, make sure its packaging shows the same color stars. The instruction sheet seemed a bit confusing at first. It should be a bit more detailed with larger drawings. After reading the instructions several times, we got the "drift." - I only have three questions: Will the receiver and our three remotes have to be reprogrammed once the electricity goes out? Or does the receiver and remotes remember the original programming? Or what happens when sombody unplugs the receiver by mistake?
, Bay Area
I bought this reciever hoping to bring my new house's older craftman garage door opener into the 21st century. Unfortunatly the original remotes are long gone and are no longer avalible. I already had a spare Chamberlin 373LM three button opener from my previous house and was hoping they would be compatible as they are both on 315 MHz. As there is no outlet near the door to the house I decided to connect the new and old openers in parallel. Once the connections were made I followed the directions and had the reciever progremmed in a few seconds. The range is very good, I can reliably open the door several houses down the street. The only quibble I have with the reciever is that the wires and programming can only be performed by removing the front panel of the reciever. This is done by using a small screwdriver which can easily damage or break the plastic of the reciever is not done with great care. With the wires in place the panel also does not fit quite right. Still given the way it is installed up and out of the way in my system it is not a great problem for me.
- Free shipping! Orders $59 or more Offer ends 30-Apr-2014 See details.
- MAX Member Exclusive. Choose FREE Store Pickup and Get 5% back in points! Offer ends 30-Jun-2014 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends 19-Apr-2014 See details.