Specifications & Dimensions
|Dimensions and Weight:|
|Overall Dimensions:||Table Top : 600 sq. in.|
|Type:||Router table or router combo|
Ratings & Reviews
Premium Die Cast Aluminum Router Table Frees Woodworkers To Create
For precision woodworking with fewer slips and less wasted materials, the Craftsman premium die cast aluminum router table will give you 600 square inches of space and a variety of tools that ensure smooth accuracy. Instead of struggling to hold the router as you cut, keep both hands free to use on the wood and know that your cuts are accurate thanks to the table's microfine adjustments.
The premium die cast aluminum router table comes with a dust guard, fence, miter gauge, two feather boards, five insert rings, hardware and manual. It's built with a storage cabinet, a double power strip and a dust port that's easy to attach a shop vac to.
- The Craftsman premium die cast aluminum router table gives you the space you want and the tools you need for serious woodworking
- The work surface has 600 square inches of space
- Integrated scales let you measure accurately
- The 26" x 3-3/4" aluminum fence extends to 30 inches and allows you to make fine adjustments
- The jointing fence offsets up to a half inch
- A drop-in plate lets you attach bits and level quickly
- For most Craftsman router models except 17540 add 17543, there's above-the-table cutting height adjustment
- A duplex power strip with safety lock is integrated
- A medium-density fiberboard cabinet below the table provides storage space
- Feather boards include attachment slots on the fence and table top
- The miter gauge goes up to 60 degrees in both directions
- 5 insert rings with opening diameters of 1-1/4", 1-7/8", 2-1/8", 2-1/2" and blank
- A 2-1/4" dust port allows easy clean-up with a shop vac
Added on March 30, 2013
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
easy to assemble and looks to be very high quality in fit and finish. Works well with various routers. I use the craftsman 2.25 Hp but directions are included for most others.
The on line description of this router table describes an above the table cutting height adjustment mechanism. The video showing the features of this item shows this mechanism. If you order this item it will not be included in the box with the router table. This mechanism evidently must come in a separate box that is not being shipped with the table. There is either a packaging problem with this table with the adjustment mechanism, or they have changed the features and have not changed the on line description or the video showing the features. The table looks great and probably works great. I never got the chance to find out as I could not find anybody at Sears that could find a solution to the lack of inclusion of the above the table adjustment mechanism with this product. This is one of the features I ordered this table,
Very well made easy to put together and level. Only gripe i have is the toy like miter gauge and non standard slot great product much better than the POS i bought at ************** Tools!
Rancho Cordova, CA
I purchased this table along with the roller cabinet and the 2-hp fixed/plunge base router. Fantastic combo with the fixed base mounted to the plate, switching is just flipping a lever and pushing a button for different apps, example, inlays. Once assembled, table is solid. Adjustments for different app's are plentiful and set up only takes a few minutes. Router plate is adjustable with 4 screws for flush fit, and top height adjust is a welcome plus. I have found only two draw backs to the system. The miter slot is narrower than normal, so after market items are not compatible, ( I was hoping to use my Incra I-Box on it, but not so ). And though you have a vacuum system, dust and shavings still travel into the cabinet. Due to the motor being in there, I would have rather seen a vacuum system in the cabinet also for keeping dust out of the router motor. I may just modify with a Y system to help keep it clear. One thing about my Craftsman tools after 30 some years, is I still have them, and I'm sure this system will be no exception!
Everyone who is complaining thinks they should get a perfect router table. YES you can get one, but they are 2000$ and up! However, if you want something better than the 50-150$ tables with the molded plastic sides (legs) then this is a very good solution. The table is flat, large, and has many adjustments. Once you get it assembled and adjusted, this is a very solid and very sturdy table. I bolted mine down to a heavy workbench and its very good. Is it perfect? NO. Is it excellent for 250$? Absolutely and that is the context that I purchased/and am writing this review in. I am not comparing it to a 2000$ table with incra fence and mitre gauge. Seriously, if you buy and dont like it sears will take it back, but don't act like they took advantage of you. WHich brings up second point. READ INSTRUCTIONS. Don't assume you are so smart that you don't need to (then complain about the assembly or table not flat). You can always go to woodworking store and get the 2500-5000$ table all assembled and delivered. This is a 250$ table and is very good for a 250$ table. Thank you
Spring Hill, FL
I am very pleased with this unit and the base that goes with it. It is producing very nice work. The router mounting plate, as it comes from the factory is about 1/16 lower than the rest of the table. BUT there are adjustment screws in each corner, near the mounting screws, that can be used to make it perfectly level. Which I did.
Well, I read the reviews prior to purchasing the table. I assumed that the casting process for the table top would be flat. The table went together easy and solid. The fence has nice features. I have the Craftsman " professional " 2.5hp router mounted to it, which is a decent router. Now to the table top.. The top seams flat enough to make even cuts on passes. The drop-in plate was adjusted flush using a level to span the entire top. I used a jig to make dovetails. The jig kept catching on the surface during cutting. After looking closer and using a carpenters square, the surface is high on the edges and dips in the middle. Also is quite wavy throughout the tables surface. I emailed Craftsman with the issue with out a response. So, I had to fix the issue on my own. I used a sheet of MDF, sprayed glue to the surface and applied sheets of sand paper. Laying the table surface on the sand paper, I basicly sanded the table moving it back and forth. FYI, it is a crazy workout. I started with 60 grit and progressed to 100, 220, 400, 600. I did it with the drop-in plate as well. After all the hard work, it is now a flat surface. The sanding showed how uneven the surface was. If you want a router table with a flat surface, this is not the one for you. Unless you have the time to make it flat. I am sure there is an easier way of flattening the surface. Other then the table surface (which is the most important part) I think it is a nice table with the features it has. The switch is in a comfortable place. It will not accommodate horizontal raised panel bits. A vertical raised panel bit is an alternative. I love the table after the work.
This router table turned out to be much better than expected. I wasn?t very impressed with most of the tables within my budget, and I had planned on building a router table, but I needed it now and didn?t have time. You can?t beat this table for the money. It took me about twenty minutes to assemble, and another half hour or so to get it dialed in. I also bought the Craftsman 14 amp, 2.5 hp router to go with it. From the very first cut I was amazed what an awesome tool this is, and a great addition to my workshop. The only drawback that I have found is that I have to completely remove the router from the table to change bits, but other than that this was a solid buy.
Los Angeles, CA
Purchased On 1 / 11 / 14 And Got The Optional Base. Upon Opening The Box To The Table, I noticed there was quite a bit of glue squeeze out from the cheep edge banding. most of which stained the melamine grey. ( gum off worked well ) As I assembled the unit, i noticed the reverse thread screw inserts easily tore out as i put on the bottom ( last step ) and required me to epoxy them back in place. ( the included screws are slightly to long and forced them out of the hole making a 1/4'' gap all around, drill them 1/2'' deeper and epoxy the insert in place. # The Edge banding joint was uneven and looks like a dirty handed worker hand applied it, IN THE FRONT OF THE UNIT. Severely disappointed as it is unsightly. After assembling the table, i started on the base. the base was much better quality than the MDF on the table. No Stripping of the inserts or gaps. the slight lip on the top edge also 99% covered the unsightly edge band in the front of the table, A+ for the base. I then joined the 2 units together and hit the foot lock wheels. solid. peeled the stickers off the table, and went to square the top with the insert. Upon hitting the top with a steel rule, i noticed it is indeed VERY VERY uneven. 5 Thousands my Buttocks. The infeed is at least 1/4'' off the rest of the table near the far right of the edge, and the insert itself is not flat. I figured that there was no way it would route a straight line, so i tested it after squaring the best i could abut i couldn't visually see irregularities. Overall: C- Likes: Sturdy Base # Not Included # Included Accessories Removable Safety Guard For Small Close Cuts Micro adjust fence Dislikes: Cheep MDF # Fuzzes Like Cardboard When Drilled # Poor Finish Poor Edge banding FALSE Advertising Of Flat Surface Screws Longer Than Inserts Accommodate Overpriced For The Quality...
The mounting plate has four leveling screws located next to the mounting screws. If you loosen the mounting screws you can then raise or lower the mounting plate so that it is level with the table using the leveling screws. This is explained in the Owners Manual. I find this router table to be excellent. I recently purchased one and am very satisfied. I also purchased the base and that has made it even easier to use and I especially like that it is on wheels with two locking wheels.
- Members Get 10% back in points on first $500 of each qualifying purchase with a Sears Card. Offer ends 25-Dec-2014 See details.
- Free shipping! Orders $59 or more Offer ends 31-Dec-2014 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends 31-Dec-2014 See details.
- Need it by December 24. Offer ends 24-Dec-2014 See details.