Share This Page Print

Enlarge Image

  Router and Router Table Combo

  Item#  00937595000 | Model#  37595
Close

Create a Review

 
 
 Rating 4.0 | 69 Reviews | Write a review
$119.99
$119.99
I Own This Add to List
 

Specifications & Dimensions

Dimensions and Weight:
Overall Dimensions: Table Top : 334 L in.
Product Overview:
Type: Faceplates

Overview

Ratings & Reviews

Special

Projects

Product Description

Router And Router Table Combo Is Powerfully Accurate

The Craftsman router and router table combo merges user-friendly and powerful in a package that gives you everything you need but the lumber to get started on quality woodworking. The long-lasting router has a 1 3/4 horsepower motor that's robust enough to work through even hickory. The table gives you 334 square inches of smooth working surface on top of a sturdy cast aluminum base.

This router and router table combo gives you a number of tools that let you make sure your work is clean and accurate. The cutting depths can quickly adjust-and lock-to microfine levels. The fences are adjustable, and extendable, too.

  • The Craftsman router and router table combo gives you what you need to get started on setting up a woodworking shop
  • Comes with router, 1/4" collet, wrench, table, fence, dust guard, two feather boards, miter gauge, three insert rings, hardware and a manual
  • The 9.5 amp router has a 1-3/4 HP motor that runs at 27,000 RPMs
  • The router is built with permanently lubricated and sealed ball bearings for longer motor life
  • The table has a cast aluminum base and motor housing
  • There are 334 square inches of space on the 11/16 in. thick laminate-surfaced tabletop
  • Cutting depths can lock down in microfine adjustments
  • The fence adjusts for proper bit clearance, with the infeed and outfeed extending up to two inches
  • The jointing fence off sets up to 9/16 inch
  • Above-the-table cutting height adjustment works with most Craftsman routers except models 17540 add 17543
  • Table includes a double outlet power strip with a safety lock
  • The miter gauge adjusts up to 60 degrees in both directions
  • Three insert rings have opening diameters of 1-1/4", 1-1/2", and 1-3/4"
  • Dust extraction port

This product comes with:

Added on April 28, 2013

 

Overall, others give this:

69 Reviews Write a review
60 Reviewers (87.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
(0)
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise24 found this helpful
wildcardsworld
May 19 , 2013
Fantastic User Friendly Top of Table Features
for several months searching for a Table / Router / i have found 2 that were very expensive both of them over $ 700 for the table and router . What i wanted was a Router and Table that allowed me to change Bits and make Adjustments from ABOVE the table . now along comes a new item from Sears Craftsman a Router / Table Combo which is priced Below $126. Tax included The parts were all in the box The instructions were clear and simple to follow and once its assembled its easy to use and does exactly what is needed. A Fantastic product
Criticism6 found this helpful
anich
Feb 20 , 2014
Don't be temped by the price
As with many other Craftsman power tools it is easy to get sucked in by the attractive price. I purchased this router and had the first one fail within the first 30 days. I was able to exchange for a new unit after i returned home to get the table because the router could not be exchanged without it. Less than 1 year after receiving the replacement, it has not failed completely as well. This router works fine if you plan to make 1-2 cuts per week. When I cut for 15 continuous minutes i noticed the motor started to weaken. After a few days of the motor never fully getting up to speed the router has not failed completely. On the plus side, the light still works. Spend the extra money and get something else.
 

jvh1211

Littleton, CO

Dec 18 , 2014
via sears.com
Overall
works great

i bought this on black friday to finish a hard wood flooring project and it worked great. i used a cheap round over bit but the router and table worked perfectly cutting through hard wood.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

SLHarris911

Vancouver, WA

Dec 15 , 2014
via sears.com
Overall
Nice rotor table and rotor

Great starter setup. I got tired of going to a friend's house and having them do the routing for me. This has been a great small setup to use and learn on my own.


Helpful
(1)
Not Helpful
(0)
Flag this Review

Sheppdave

El Cajon, CA

Dec 15 , 2014
via sears.com
Overall
Don't like the plastic fence

The router and table are fine. It falls short by using a really cheep plastic fence with plastic lockdown nuts. The fence flexes and I feel like I will break the lockdowns if I tighten them as much as I would like. That being said, this table and router are still a great value when on a good sale.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

ninosr

Sioux Falls, SD

Dec 11 , 2014
via sears.com
Overall
Router Table Combo

Easy set up for first time user, completed my project in no time.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

aprildlp

Indiana, PA

Dec 11 , 2014
via mobile
Overall
great router

Bought for teenage son interested in woodwork. Great price.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review
Dec 11 , 2014
via sears.com
Overall
Works for the $$

Pluses - Great $$ - good quality and ability to adjust height from the top. Cons - no 1/2" collet and you have to buy 3/16 long Allen key for top adjustment

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review
Dec 9 , 2014
via sears.com
Overall
junk router

the router table is fine - the router itself is junk - used it 3 times and it died. first pass was fine - second pass the rpms seem to get less. third pass half way thru the motor just plain died. no getting it to run again. you should replace the table with aluminum.


Helpful
(0)
Not Helpful
(0)
Flag this Review

Sherrie_Stoner

Ashland City, TN

Dec 7 , 2014
via mobile
Overall
Craftsman Router & Table Combo

Excellent

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

Sherrie_Stoner

Ashland City, TN

Dec 7 , 2014
via mobile
Overall
Craftsman 100-PC Accessory Kit

Excellent

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

gadnr159

Hiawassee, GA

Nov 17 , 2014
via sears.com
Overall
Craftsman Router and Router Table Combo

The Craftsman Router and table combo is a fair value. The table is of average quality. I have had several problems getting the router to raise and lower using either the Allen wrench for above table adjustment or the below table adjustment ****. It appears to get hung up. As of yet I have not contacted Sears to see if there may be a fix for the issue. For someone who is not interested in doing a lot of serious router work I would recommend. For serious woodworkers I would have to say this combo is average at very best.


Helpful
(4)
Not Helpful
(0)
Flag this Review
  • Free shipping! Orders $59 or more Offer ends   31-Dec-2015 See details.
  • Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card Offer ends   31-Dec-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x