Share This Page Print

Enlarge Image

  Router and Router Table Combo

  Item#  00937595000 | Model#  37595
Close

Create a Review

 
 
 Rating 4.0 | 37 Reviews | Write a review
Reg Price: $119.99
Savings: $20.00
$99.99
I Own This Add to List
 

Specifications & Dimensions

Product Overview:
Type: Faceplates
Dimensions and Weight:
Overall Dimensions: Table Top : 334 L in.

Overview

Ratings & Reviews

Special

Projects

Product Description

Router And Router Table Combo Is Powerfully Accurate

The Craftsman router and router table combo merges user-friendly and powerful in a package that gives you everything you need but the lumber to get started on quality woodworking. The long-lasting router has a 1 3/4 horsepower motor that's robust enough to work through even hickory. The table gives you 334 square inches of smooth working surface on top of a sturdy cast aluminum base.

This router and router table combo gives you a number of tools that let you make sure your work is clean and accurate. The cutting depths can quickly adjust-and lock-to microfine levels. The fences are adjustable, and extendable, too.

  • The Craftsman router and router table combo gives you what you need to get started on setting up a woodworking shop
  • Comes with router, 1/4" collet, wrench, table, fence, dust guard, two feather boards, miter gauge, three insert rings, hardware and a manual
  • The 9.5 amp router has a 1-3/4 HP motor that runs at 27,000 RPMs
  • The router is built with permanently lubricated and sealed ball bearings for longer motor life
  • The table has a cast aluminum base and motor housing
  • There are 334 square inches of space on the 11/16 in. thick laminate-surfaced tabletop
  • Cutting depths can lock down in microfine adjustments
  • The fence adjusts for proper bit clearance, with the infeed and outfeed extending up to two inches
  • The jointing fence off sets up to 9/16 inch
  • Above-the-table cutting height adjustment works with most Craftsman routers except models 17540 add 17543
  • Table includes a double outlet power strip with a safety lock
  • The miter gauge adjusts up to 60 degrees in both directions
  • Three insert rings have opening diameters of 1-1/4", 1-1/2", and 1-3/4"
  • Dust extraction port

This product comes with:

Added on April 28, 2013

 

Overall, others give this:

37 Reviews Write a review
33 Reviewers (89.0%) would recommend this to a friend.
Overall Rating Breakdown:
5stars
4stars
3stars
2stars
(0)
1stars

Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.

Most Helpful Reviews

Praise22 found this helpful
wildcardsworld
May 19 , 2013
Fantastic User Friendly Top of Table Features
for several months searching for a Table / Router / i have found 2 that were very expensive both of them over $ 700 for the table and router . What i wanted was a Router and Table that allowed me to change Bits and make Adjustments from ABOVE the table . now along comes a new item from Sears Craftsman a Router / Table Combo which is priced Below $126. Tax included The parts were all in the box The instructions were clear and simple to follow and once its assembled its easy to use and does exactly what is needed. A Fantastic product
Criticism4 found this helpful
Tom68
Aug 24 , 2013
SPEND A LITTLE MORE AND GET BETTER TABLE
A very inexpensive and hard to keep set router table. Router is difficult to set and will become mis-djusted after use. Had the 1/2 inch straight router bit become dislodged from the mandrel and chew through a wood piece I was routing.
 

kildar

Harlingen, TX

Mar 24 , 2014
via sears.com
Overall
Router

It was very easy to put together and it works great yea its sears

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

hawaiianmaxx

Kaneohe, HI

Mar 21 , 2014
via sears.com
Overall
Awesome combo for the price!

I do a lot of woodworking for custom car audio work. I've always used a plunge router, but realized a router table would work better on some projects. Only used it a couple times so far, but it has worked great. Awesome combo for the price, especially when on sale!

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

d7431

Boise, ID

Mar 7 , 2014
via sears.com
Overall
easy to use

This combo replaced a 25+ year craftsman. very easy to set-up the depth of bits. Like the one switch since I have the "vac" plugged in.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

Boardguy

Seal Beach, CA

Mar 7 , 2014
via sears.com
Overall
Works better that I thought it would

After reading several (positive and negative) reviews about this tool, I bought it when it went on sale. Overall, it's an excellent addition to my shop. Despite what the specs (and other reviewers) say, you CAN change bits from the table-top by simply adjusting the height to its highest point, locking the motor in place and using the supplied wrench. The only drawback I found was that the motor cannot be removed from the base with the table mounted (as is) to a workbench. I put a 3/4 inch strip of plywood under each of the support legs, which raised the entire table enough to get the motor out. But, since I can change bits from the table-top, I don't need to remove the motor anyway. The fence dust collection port is 2.5 inches and the port for the router itself is 1.5 inches (kind of difficult to hook them both up at the same time). I recommend buying the extended warranty (cheap). This tool saves me a LOT of time and works perfectly.


Helpful
(0)
Not Helpful
(0)
Flag this Review

PDC427

Cranston, RI

Feb 23 , 2014
via sears.com
Overall
No-Brainer for $99!

I picked this table/router combo up on sale for $99.00!!! For small projects this router will serve you perfectly. I'm only going to be using this router on MDF board for mobile audio projects so, for me, this purchase was a no-brainer.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

anich

Thornville, OH

Feb 20 , 2014
Overall
Don't be temped by the price

As with many other Craftsman power tools it is easy to get sucked in by the attractive price. I purchased this router and had the first one fail within the first 30 days. I was able to exchange for a new unit after i returned home to get the table because the router could not be exchanged without it. Less than 1 year after receiving the replacement, it has not failed completely as well. This router works fine if you plan to make 1-2 cuts per week. When I cut for 15 continuous minutes i noticed the motor started to weaken. After a few days of the motor never fully getting up to speed the router has not failed completely. On the plus side, the light still works. Spend the extra money and get something else.


The reviewer indicated they are affiliated with this product.
Helpful
(0)
Not Helpful
(0)
Flag this Review

sa02000

Allen, TX

Feb 18 , 2014
via sears.com
Overall
Average

It does the job but there is lot more to be desired... but you get what you pay for. Great for a beginner.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review

dylan

Clymer, NY

Feb 16 , 2014
via sears.com
Overall
router & table combo

This combo set was everything I wanted, I dont do alot of wood working so I didnt need something huge. This was perfect! I would recommend this to anyboby that is a do it your selfer.

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

Wood_guy45

Farmington, NM

Feb 13 , 2014
via sears.com
Overall
Good product but slightly under powered

I would recommend this product to a friend.

Helpful
(1)
Not Helpful
(0)
Flag this Review

Ken304

Mission Viejo, CA

Feb 12 , 2014
Overall
Needs a reducer for the vacume adaptor on the dust extractor

The table is great for the price however the vacume adaptor on the dust extractor port is designed to attach a 2 1/4" shop vacuum hose. My shop vac has a smaller hose and I have been unable to find a adaptor that will work. The universal adaptor Sears carries, part number 917837 does not work. Craftsman either needs to include an adptor that will work with smaller shop vac hoses with the table or provide the name of a manufactuer and part number that will work with the extractor port included with the table.

I would recommend this product to a friend.

Helpful
(0)
Not Helpful
(0)
Flag this Review
  • Free Shipping on this item Sold by Sears! Offer ends   31-Dec-2014 See details.
  • Free shipping! Orders $59 or more Offer ends   30-Apr-2014 See details.
  • MAX Member Exclusive. Choose FREE Store Pickup and Get 5% back in points! Offer ends   30-Jun-2014 See details.
  • Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends   31-Dec-2014 See details.
  • Get this Tool Item at a limited time Hot Price! Sold By Sears Offer ends   19-Apr-2014 See details.

Connect With Craftsman

Shop Your Way Craftsman Instagram

Sign up for Email Savings

close x