Specifications & Dimensions
|Item Weight (lbs.):||30|
|Type:||Miter saw stands|
|Load Rated To (lbs.):||330|
|Assembly Required:||Fully Assembled|
|Package Contents:||Stand, Universal Moutning Brackets, Hardware|
Ratings & Reviews
Universal Miter Saw Stand Takes Your Work Anywhere
Make using your miter saw easier with this Craftsman Universal Miter Saw Stand from Sears. The brackets of this universal stand fit most 10- and 12-inch miter saws, as well as other bench top tools, for hassle-free mounting and removal. This supportive stand offers a compact design that is easy to transport and store, and yet the support arms extend up to 80 inches to accommodate those longer work pieces.
This Universal Miter Saw Stand lets you use your miter saw and other bench top tools just about anywhere. Break free from the chains of your workshop or garage, and bring your miter saw and other tools from job to job. This compact, portable stand weighs less than 25 pounds, so transporting it is never a hassle. Plus, it offers spring-loaded support legs that fold up for easy storage, taking you from workshop to truck to construction site and back again.
- This Craftsman Universal Miter Saw Stand from Sears is a must-have for easy mounting of your miter saws and more
- Universal design means brackets fit most 10- and 12-inch miter saws and other bench top tools
- Support arms extend up to 80 inches to accommodate longer work pieces
- Spring-loaded support legs fold up for easy storing
- Two height-adjustable 11 1/2-inch smooth steel rollers help feed long work pieces
- Weighs less than 25 pounds, so moving from job to job is never a burden
- Weight Capacity: Supports up to 330 pounds
- Dimensions: 25 inches x 34 1/4 inches
Added on September 14, 2012
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
I purchased this stand on an impulse buy last year 2012 on black Friday. I was a little skeptical of its quality and left it in the box for a while, thinking for the price it was probably cheap made and would just take it back. When I finally decided to open the box it was a pleasant surprise. It is sturdy enough for my Dewalt 12in miter saw and easy to fold up and store.
Mission Hills, CA
I took it out of the box and set it right up with no tools. Very easy set up and is sturdy. The bolt down holes on my miter were not square so I had to use the universal bars that came with the package. Again, worked perfectly. Absolutely no need to buy a more expensive brand.
Overall the stand seems pretty good. I'm a DIYer and it fits my needs. If you are a contractor, you will want something that easier to move around. I was able to mount a Chicago Electric 12" sliding miter saw (**************) to it with no problem. I had to remove the rubber feet from the bottom of the saw to get it mount flush on the rails. When I first started to mount the saw, I was going to use the crossbars. I began attaching the crossbars to the mounts when I realized a flaw in the design. The square part of the carriage bolts they give you for this do not fit through the holes on the crossbars. This is a pretty big miss. Once I realized this, I considered drilling them our a bit, but then decided to attempt to mount the saw without the crossbars. That worked, so I just tossed the crossbars into a corner of the garage never to be seen again. I like that the mount will sit level on the ground or table in case you want to use the saw for a small job without setting up the entire stand. I suspect this stand will last longer than the saw.
I bought this to mount my dewalt miter saw. What I really liked about it was that it can fold up pretty flat and that it includes the rollers. I bought it for my summer project of building a deck and the rollers will come in handy for cutting the plank boards.
I got this for less than $50, and for that price, there's little to complain about. Very sturdy, and it fit my Hitachi saw with the additional crossbars. I had a problem with the eight screws that connect the crossbars to the clamps. Difficult to describe, but it was a bad design on the screws. I had some washers that were the right size and gave a workaround to the problem. The other issue is the clamps themselves. When unclamped, they don't come completely loose, and I can't get the saw off the stand. I have to yank them off, which caused me to nearly drop the saw. Perhaps there is an adjustment somewhere that will help with that.
If you can't put this stand together and attach your saw without instructions, then you shouldn't be operating the saw! This thing is built really well and my saw fit without the adapter (Dewalt 10"). However, the adapter is built well and I can see how the average DIYr can make it work with their saw IF they even need it. At 50 bucks, I am thrilled with this purchase. There are instructions included and if you have to torque down on the clamp handles too much, there is a screw adjustment on the apposing side of each clamp that adjusts and makes clamping the saw to the rails smooth and easy.
This chop saw stand makes a simple, but hard to use saw into a reliable and easy to use tool. Next time I would get the next one up to get the wheel package for easier transport.
Carol Stream, IL
I purchased this work stand for use with my craftsman 10 inch miter saw. Fits perfectly with saw and packs up well for storage in garage. Would highly recommend this product.
- Members get 3% in points or with Sears Card get 10% in points. Offer ends 26-Dec-2013 See details.
- FREE shipping! Orders $59 or more Offer ends 24-Dec-2013 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends 31-Dec-2013 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.
- Family & Friends Event! Extra 10% off Select Tools Sold by Sears! Valid thru 12/10/2013 9am. Offer ends 10-Dec-2013 See details.