Specifications & Dimensions
|Maximum Torque (ft-lb):||711 Ft. Lbs.|
|Variable Trigger Speed:||No|
|General Warranty:||2 Years|
|Ratchet Drive Size:||1/2 in.|
|Included with Item:|
|Tool Air Inlet Size:||1/4 in.|
|Tool Min. Hose Size:||3/8 in.|
|Average Air Consumption (CFM):||5|
|Dimensions and Weight:|
|Item Weight (lbs.):||4.25 lbs.|
|Overall Dimensions:||7-1/8 in. length|
Ratings & Reviews
Choose This Professional 1/2-in. Impact Wrench to Deliver Maximum Torque with Minimum Exertion
Featuring a patented power regulator and forward/reversing system built into the trigger, the Craftsman 1/2-in. Composite Impact Wrench is designed for one-hand operation. A sturdy composite body with a magnesium hammer case makes this wrench sturdy and long lasting. Weighing only 4.25 lbs, this lightweight tool is equally efficient and fast for home projects as it is for repairs at the car shop.
The ring-type retainer in this Professional 1/2-in. Impact Wrench provides secure socket retention and makes socket changing fast and easy. This ergonomically designed tool has an exhaust which passes through the handle diverting the exhaust away from your hand. With a sturdy grip and easy controls, you can easily maneuver this impact wrench with maximum control. Combining modern design with decades of Craftsman know-how, this tool is a great addition to your personal or professional tool kit.
- Built for dependability and long-lasting use, the Craftsman 1/2-in. Composite Impact Wrench gives you just what you need to get work done
- Maximum torque of 711 ft. lbs. makes even the toughest work seem effortless
- Weighing 4.2 lbs., this wrench can be easily stored in your garage or shop
- Torque Drive size:1/2 in.
- Air Inlet Size:1/4 in.
- Min. Hose Size:3/8 in.
- Dimensions: 7-1/8 in.
- 1 year limited warranty from Craftsman
- Available for Gift Wrap
Added on April 14, 2010
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
I recommend it for it lightweight and compactness. Recently, I just ordered an Aircat 1150k and it is a beast; however, this is a great gun. I upgraded to this from the Craftsman Composite one not the cheap one but the one that costs around ~120
Received this impact as a Christmas gift from my parents. Was a little worried from reading some of the bad reviews on it but this is an amazing impact for the money. I have a 27 gallon craftsman professional compressor with a regulator and air filter/water remover; this impact works wonderfully with this setup. It has 3 torque settings (idk what the torques are on these settings?? Depends on air pressure/flow I guess) but it doesnt have any trouble removing my lugs on setting 1. My lugs are properly torqued and coated with anti-seize though. Ive removed some lugs from vehicles that are neglected and setting 3 zipped them right off. When putting lugs on, I find that a few quick bumps on setting 1 torques the lugs just under 100 ft-lbs as verified by my craftsman torque wrench. The paint on the nose of the impact does chip off very easily. Would be great if this area has a rubber boot over it so you could quickly lay the impact down. Highly recommend this impact!
Timber Lake, SD
711 ft lbs my ****. This thing has less power than my cordless 3/8' impact. Will not take off lug nuts, which should be no sweat for any 1/2' drive impact. When you think impact you think this is the tool that will either take it off or break it off. Again this thing can't remove normally torqued lug nuts. Basically this thing just vibrates and makes noise, that's all its good for. Take it to the recycling yard for scrap. Better yet, don't buy it at all. waste of my money. Craftsman has become garbage.
Fort Worth, TX
I purchased this product, and I'll have to add that it has a lot of power. At first, I was skeptic about it because I was always going for the top name brands like Mac and Snap-on. I work in a body shop, and very often I have to remove the tires from a vehicle to repair wheel-well openings on the quarter panels and fenders. Before, I was using the MG725 Snap-on impact wrench to remove tires. I had it for over a year, until it started giving me problems, since I didn't buy it new, but used for $200.00 dollars. I wasn't going to pay close to $600.00 dollars for a new one, which I think is absurd. Instead, I came across the Craftsman Professional 1/2 impact wrench. I read the aspects on it, and as soon as I saw that it was equipped with 710 lbs of Torque, I had to get it. I tried it on a 2011 Dodge Ram Super Duty diesel truck, just for the heck of it. I was amazed that the impact wrench removed the lug nuts quickly with a 60 gallon air compressor.
The reviewer indicated they are affiliated with this product.
I had on old Husky impact wrench that was pitiful. I purchased this one with high hopes, and my prayers have been answered! This tool is great, plenty of power for those really tough jobs. I love it.
Wappingers Falls, NY
Bad and I don't mean good !Mechanic since 86 . I love Sears, buy there all the time. And still will , but this gun has to be the worst I have ever had. First one felt weak so I returned it,and they gave me a new one. Another year has gone by and the gun is useless .Rated at 710 lbs ,8000 rpm, ,, it spins ,,, maybe 800 now !Never really seemed to have the advertized power ! VERY disappointed in this gun .
For the money this a very great product. It has tons of power and is built rather well. The first thing I have to address is that it does not have any hookups. For me this is a plus as my system uses 1/2 inlets instead of 3/8. I have used it time and time again without problems. Whether it is on our portable at 90 psi or our built in compressor at 150 psi plus, it works great and has shown no signs of deterioration. After a year of service, I believe if used properly and maintained it will provide years of service. One of the best investments I have made, as it has paid off multiple times.
The reviewer indicated they are affiliated with this product.
very powerful and feels lighter than my other impacts. got on sale and to me got to say is the best so far, love that i could lower the power so i don't always over-tight my nuts and bolts. i do lubricate it before every use so it last a long time... hopefully
- Members get 3% in points or with Sears Card get 10% in points. Offer ends 26-Dec-2013 See details.
- FREE shipping! Orders $59 or more Offer ends 24-Dec-2013 See details.
- Use your Sears Card and Save! Extra 5% off Tool items Sold By Sears when you use your Sears Card. Offer ends 31-Dec-2013 See details.
- Spend $199 in tools from Sears and enroll in the Tool of the Month - www.sears.com/toolofthemonth Offer ends 31-Dec-2014 See details.